Monosketch

https://monosketch.io/

by penguin_booze • 5 months ago

876 140 5 months ago

monosketch.io

aanet• 5 months ago

Looks fab. Great design.

Can it make polygons? Basically, shapes other than rectangles? If so, how? (maybe I missed it?)

bargainbin• 5 months ago

Not the author but I'm making a similar tool currently, and the reality is no because of the nature of it being character based.

You can theoretically have "artistic" polygons where it renders using a mixture of characters to emulate how that grid would be filled if a certain shaped was laid over it but the end result wouldn't be very functional for the purposes of diagramming.

spockz• 5 months ago

If we have syntax highlighting build into the TrueType font, can’t we also get sticky lines with the same mechanism? It would then only work with the right font obviously.

baalimago2• 5 months ago

It's not an ascii renderer, but a ascii diagram drawing tool

ftr1200• 5 months ago

https://cascii.app can :)

jonpalmisc• 5 months ago

For a native macOS app, there is also Monodraw [1], which is great.

[1] https://monodraw.helftone.com

Apreche• 5 months ago

Mono draw is in maintenance mode and non-free. Based on the name, pretty sure that Monosketch is an explicit replacement.

lemontheme2• 5 months ago

Maybe it's just more or less feature-complete? Was curious, as someone who hadn't heard of it before, so I checked the blog. Last post is from April last year and concerns public testing of a new release. That's not particularly old, if you ask me?

jen729w• 5 months ago

Monodraw got an update the other week. It isn't being changed, but it doesn't need to.

Great little app. And it's $10, once. Hardly breaking the bank.

merelysounds• 5 months ago

Based on the name

I think in this case the name alone is not enough to suspect a replacement; perhaps it’s just a similar product in the same domain (_mono_space visual editors).

sbondaryev2• 5 months ago

Nice project!

This pairs nicely with ASCII-Driven Development - for iterating and modifying layouts with AI.

https://medium.com/@calufa/ascii-driven-development-850f6666...

rvz• 5 months ago

That does not make any sense at all in the long run.

Not everything has to be done in arcane ASCII diagrams because of vibes and LLMs.

This is yet another fad destined to be forgotten.

sbondaryev2• 5 months ago

That's fair. It's just a suggestion - it's been useful for me in early stages of UI prototyping.

virtualritz• 5 months ago

Hook up to svgbob[1] and bob is your uncle (pun intended).

[1] https://ivanceras.github.io/svgbob-editor/

alexhr• 5 months ago

This is really cool. Better than draw.io and excalidraw

worldsayshi• 5 months ago

I like it! I really like that the lines stick to the boxes but it's a bit hard to make them stick.

baalimago2• 5 months ago

I'm a huge fan of asciiflow, this is better!

ltrg• 5 months ago

Laughed at the default text value. What track's that from?

wiseowise• 5 months ago

There’s also https://github.com/casparwylie/cascii-core.

atentaten• 5 months ago

Very nice. It would be great to see this as an Obsidian plugin.

re5i5tor• 5 months ago

Slightly off topic but I am writing an Excalidraw MCP that allows Claude Code and Claude.ai to create Excal drawings and then iterate on them — I gave Claude the ability to “see” the resulting drawing via a tool that runs a rendering pipeline and returns a png to the model. It’s producing the Olympic logo pretty nicely ;-)

Sharlin3• 5 months ago

Hate to be that guy, but ASCII doesn't contain box-drawing characters or arrows. I guess it's a lost cause though…

wingmanjd2• 5 months ago

Doesn't it have those characters via extended ASCII? I seem to recall making boxes with characters back in my BASIC class.

brazzy• 5 months ago

"Extended ASCII" is just a sloppy term for a bunch of other encodings that are not, in fact, ASCII.

If your BASIC class used (or emulated) a C64 or compatible, you were using https://en.wikipedia.org/wiki/PETSCII and if it used MS-DOC you were using https://en.wikipedia.org/wiki/Codepage_437

Sharlin3• 5 months ago

As brazzy said, there's no such thing as extended ASCII. There's just a huge number of ASCII-compatible eight-bit encodings. The original IBM (and DOS) character set, hardwired into ROM, is the one you're thinking of, and went by various names such as "Personal Computer, MS-DOS United States, MS-DOS Latin US, OEM United States, DOS Extended ASCII (United States), PC-ASCII" [1].

DOS 3.3, in 1987, was the first version to support localized character sets, via a system of "code pages". You'd select an encoding/"character set" that suits your language in AUTOEXEC.BAT – or just used the default 437 if you were a US user and never had to worry about these things. For me, the most relevant code page was 850, aka "OEM Multilingual Latin 1" (not at all the same as ISO/IEC 8859-1 which is also known as "Latin 1").

Why the apparently arbitrary numbers, I'm not sure, but Claude and ChatGPT both claim the codes were simply drawn from a more general-purpose sequence of product numbers used at IBM at the time.

This application, like other similar ones, uses Unicode box drawing characters that now all reside comfortably out of the eight-bit range.

[1] https://www.aivosto.com/articles/charsets-codepages-dos.html

nasso_dev2• 5 months ago

this is super cool as an art form but ASCII art is an accessibility nightmare so please don't use it for docs unless you know what you're doing and have made it accessible in some other way

andsoitis3• 5 months ago

Good reminder to keep in mind.

At the same time, I don't think one should necessarily limit your expression based on constraints like accessibility.

simgt• 5 months ago

Is it still true with llms being so good at interpreting it? I just tried all the examples on the home page, it works perfectly. In the past couple months I've moved almost entirely back to the terminal because I can just ask my coding agent to "have a look at this tmux session".

vulcan01• 5 months ago

Is there any way to make images accessible other than the alt tag? I'm sure SVGs are more machine-readable, but how would that help vision-impaired folks?

nasso_dev2• 5 months ago

im not an expert on a11y best practices, but id say an <img> tag with alt text is enough

for inline SVG, i read somewhere you can use <title> and <desc> to describe the SVG document, but i don't know how they work in practice

lemontheme2• 5 months ago

Oh nice, this is going in the tool belt. Simple and self-explanatory. Hits the same notes as excalidraw.

Only thing I couldn't figure out right away is how to copy the drawing itself (not the JSON data). Eventually I found cmd+shift+c in the keyboard shortcuts. Bit later I found 'Export Text' by clicking on the project name (default: 'Undefined').

I'd put that functionality a bit more front-and-center

rho4• 5 months ago

Same for me. Add a 'paste text to clipboard'-button top center.

afandian4• 5 months ago

Pedantic note to people using 'ASCII' in this thread (although Monosketch tool does't (EDIT actually does) claim to be ASCII). It uses e.g. "◎" U+25CE BULLSEYE which definitely isn't.

And the 'ascii-driven-development' blog post mentioned downthread even uses emojis.

andsoitis3• 5 months ago

Pedantic note to people using 'ASCII' in this thread (although Monosketch tool does't claim to be ASCII).

In big ASCII letters on the landing page: Unleash your ideas with ASCII [] MonoSketch is a powerful ASCII sketching and diagramming app that lets you effortlessly transform your ideas into visually stunning designs.

:-)

afandian4• 5 months ago

I claimed a few things. I never claimed I could read.

kens2• 5 months ago

A historical note: even though the line/box-drawing characters go back to the IBM PC, they aren't ASCII. The PC used Code page 437, which added a bunch of characters to ASCII. To be genuinely ASCII, you need to draw your boxes with pipes and hyphens (| and -).

afandian4• 5 months ago

If you want a _real_ graphics mode in the spare bits of ASCII, check out MODE 7 (teletex) of the BBC Micro, page 488.

https://www.bbcmicrobot.com/docs/BBC_User_Guide.pdf

thom2• 5 months ago

I'd love some version of these tools that could reliably round-trip pure text. Some heuristic or model that can actually recognise boxes, lines with anchors, parent-child relationships etc, so you can paste in pure text and immediately start rearranging stuff. My experience with Monodraw was that you had to maintain the original file format to do this, so once a diagram was in a markdown file or whatever, you couldn't just cut and paste it and easily edit it. At that point it might as well be any file format rendered as an image.

afandian4• 5 months ago

This is surely possible.

You need to find the monospace whitespace characters (seems there's a few [0]). Then encode a compressed version of the logical diagram in the white space, steganography style.

Or do something with characters [1] to compress a lot of data into a tiny ball of hair at the end.

Draw.io smuggles the XML in a PNG which I've always admired.

[0] https://en.wikipedia.org/wiki/Whitespace_character

[1] https://en.wikipedia.org/wiki/Combining_character

thom2• 5 months ago

Lovely idea! You're going to be fighting against editors and linters but it'd be a very cool proof of concept.

rohit746• 5 months ago

https://github.com/jlongster/tigma there is also this

frizlab• 5 months ago

I use Monodraw[0]. Best purchase I ever made.

[0] https://monodraw.helftone.com/

ndegruchy• 5 months ago

Absolutely. Handy for making diagrams or just doodling and making custom headers for config files with `fig` and some boxes and shadows!

Brajeshwar• 5 months ago

I bought it too. I think most of us seem to bought it almost 10 years ago. Don’t use it much, but it is there when needed once in a while.

srik• 5 months ago

Likewise. I can unreservedly say it’s one of my best app purchases of all time.

dsego• 5 months ago

Right now you can just tell claude to generate an ascii diagrama, or even svg. I did a few days ago when I wanted to share a flow diagram of one particular flow in our app.

aduitsis• 5 months ago

+++ Monodraw is awesome!

curldivergence• 5 months ago

I also use Monodraw, can only recommend with one caveat: @Dear Monodraw developers, if you're reading this, please please please implement discarding text edit popups using ESC, it's been years and I still keep reaching for ESC every time I use Monodraw. I tried decompiling it to binary patch it, but unfortunately it messes up the update mechanism.

dewey• 5 months ago

Have you tried emailing them? Usually indie developers are quite open to small reasonable suggestions like that.

Hackbraten• 5 months ago

One thing that bugs me is that I can no longer access any of my Monodraw sketches because I don’t own a Mac anymore.

rcv• 5 months ago

I used to love monodraw when I had a mac. My daily driver and work machine is Linux now, so I've been searching for a suitable replacement for a while now. This one is probably the best I've seen so far.

ezekg• 5 months ago

This is my most missed app since switching from Mac to Windows. This new kid on the block looks like a solid replacement, though! Will definitely be checking it out.

dschulz• 5 months ago

One of the few things I miss after ditching the mac

TonyStr• 5 months ago

Great app!

It clicked for me once I realized you can ctrl+shift+C to copy the diagram to text, and paste in my editor! But I wonder if it would be possible to make ctrl+C copy to clipboard as ASCII? I see that ctrl+C copies the json representation of the selected objects, but surely it would be possible to maintain an internal model of copied objects, while the clipboard is always filled with usable ASCII? I think I've seen some applications do this before

sirtimbly• 5 months ago

finally!

hackrmn• 5 months ago

Tip: look into setting the value of the `spellcheck` HTML attribute/property to `false` for your element labels -- I am looking at red wavy underlines under every "GND", "uF" etc, on the [linked] front page. Spell-checking is obviously practically useless since these labels aren't meant to be spell English (or otherwise) words, I imagine.

grimgrin• 5 months ago

OFF TOPIC, but, on topic, I decided to goof with playscii yday. It is a powerful little thing, but will take some time for me to get comfortable.

"Playscii is an open source ASCII art and animation program. It runs on Windows, Linux, and macOS."

- https://jp.itch.io/playscii

- https://heptapod.host/jp-lebreton/playscii

Good little interview I found with the creator, JP LeBreton (legend, but I didn't know!)

https://cheesetalks.net/jplebreton.php

As far as tooling limitations, GZDoom is not a bed of roses. Very little in the engine is runtime editable, so you have to reload the engine to see any of your changes. A rapid turnaround time for reloading changes is nice but it's far better to have as much as possible live-update. And ideally, in my opinion, you have the editor built into the engine itself, and you can do much of what you need from there without having to jump around to outside programs. Playscii was my first big attempt to build a little environment like that, something you can think in once you learn it well enough, like a musical instrument. Miles to go but that's always where I'm trying to get to.

acedTrex2• 5 months ago

Seeing projects with first commits from 3-4 years ago feels like finding pre nuclear testing steel. No strong proof exists that this project was not conceived as slop.

bonesss• 5 months ago

LLM bots are gonna start back dating commits to look more legit.

acedTrex2• 5 months ago

Yep, i absolutely expect this to happen, the quality signals that humans use are going to be forever in flux now as the humans try to stay ahead of the bots.

graphviz• 5 months ago

Is it easy to write a renderer in another program? Do people still say lazyweb?

NoSalt• 5 months ago

"I'm passionate about creating ASCII graphs ..."

I wonder if this guy is like me, around my age. I was around at the "beginning" of the world wide web, and I absolutely love 8-bit graphics, ASCII art, etc., the simpler the better; probably because it brings me back to the heyday, the wild west of the internet. I really miss those days. :-(

smusamashah• 5 months ago

Other similar tools are

- https://textpaint.com/

- https://web.archive.org/web/20210503172024/https://fatiherik...

- https://textik.com/

- https://asciiflow.com/#/

- https://fsymbols.com/draw/

gcr• 5 months ago

don't forget JavE! http://www.jave.de/

dchuk2• 5 months ago

Pretty cool (and the linked in the comments monodraw I’m buying today it looks great too).

I’ve actually been tinkering with a web app (as a test bed for various spec driven dev frameworks with Claude code) a wireframing tool for TUI apps. Conceptually similar to figma almost, infinite canvas and all that jazz, but has premade components for the Ink TUI library (idea would be to support a few popular TUI frameworks eventually) and you can just drag and drop and design TUI interfaces, then download the skeleton code generated by the app for the whole frame.

I don’t know how far I’m going to take it, but it works so far. A picture is worth a thousand words, a picture of word characters in a ui layout is worth something right?

I’ll probably open source it eventually, I doubt there’s much of a commercial market opportunity for it

tristanMatthias• 5 months ago

Love this idea. Would be cool to have a wysiwyg for https://ratatui.rs

dchuk2• 5 months ago

Yeah my thought was to eventually cover Ink, ratatui, charm (and bubbletea /lipgloss), and opentui

It’s pretty simple to do this now with the frameworks you can use to spec work and execute on it with Claude code. I’ll keep chipping away at it and launch it at some point

akersten• 5 months ago

Looks promising. Coming from excalidraw, I can't live without the numbered 1-5 shortcuts to select the tool (instead of remembering R for rectangle, L for line, ...). Also a mode to "lock in" the current tool so I can draw many rectangles back to back. Those two things would make a huge difference in how fast I can sketch things out in this.

SAI_Peregrinus2• 5 months ago

That circuit schematic in the header is wrong enough to look like an AI-generated hallucination of what a schematic is from the "human with extra fingers" stage of image generation. Inconsistent symbol styles, missing pin labels, a shorted capacitor in the upper-left, etc.

butlike• 5 months ago

The worst part about all this isn't the fact the experts can immediately see the inadequacies of the AI tool, it's that newbies are joyously learning incorrectly. How can the Experts of the Future have a solid foundation if their foundation is built on a bunch of "your absolutely right!" LLM corrections?

floren• 5 months ago

I didn't even notice that the cap was "shorted", instead I noticed that it had the shorter line (traditionally negative) labeled "+" but connected directly to GND!

iamtuna2• 5 months ago

Ha! Good eye. That circuit was actually replicated from the Google Typograms example here: https://google.github.io/typograms/#circuits - so any schematic errors are faithfully reproduced from the original

I used it as a demo to show what MonoSketch can create, but you're right that it's not electrically sound. Maybe I should switch to a different example that won't make electrical engineers wince!

SAI_Peregrinus2• 5 months ago

It makes me instantly assume the software is low-quality.

swannodette• 5 months ago

If you use Emacs, there's a pretty nifty package https://github.com/tbanel/uniline

AdamH12113• 5 months ago

Just used this to make a couple quick diagrams. It's easy to use and the diagrams export well. A couple suggestions for improvement:

1. When working with small rectangles, I had trouble getting the rectangle to move instead of enlarge. It looks like holding down the mouse button for a second makes moving more reliable. The UI should make it clearer what I'm actually doing.

2. If I open MonoSketch in another tab, I can't make a second diagram at the same time as the first -- there seems to be one shared context between tabs. I would like to be able to make a new diagram separate from my current one.

akd• 5 months ago

What is the purpose of ASCII diagramming today? Seems like graphics are supported by every document and communications medium that I use. Is it for including directly in code?

sghiassy• 5 months ago

LLMs can understand ASCII diagrams

raincole• 5 months ago

LLMs nowadays can understand png diagrams too.

unshavedyak• 5 months ago

Is it common for graphics to be supported in the terminal?

ASCII to me represents something that can work in my term, in my source code, checks into git a bit more sanely than binary does, etc.

I still quite like it

TheRealPomax2• 5 months ago

That "seems" is doing so much heavy lifting I got a hernia just from looking at it.

Der_Einzige2• 5 months ago

Same reason people love and swear by games like nethack. ASCII art is cool af.

vunderba• 5 months ago

Well I can’t speak to ASCII in particular, but I create a lot of mermaid UML diagrams specifically because unlike an image, they are:

- Text searchable

- Easy to adjust

- Supported by a surprising number of markdown viewers.

pseudoeu• 5 months ago

I use this for traking change with git.

slopusila2• 5 months ago

agents can understand them. and you can view them in the terminal

kens2• 5 months ago

My unpopular opinion is that programming is stuck in the 1970s: a lot of programmers use a 1970s-style terminal window to enter 1970s OS commands, which run on a 1970s processor architecture (which is slowly getting replaced by a 1980s architecture). They use a 1970s editor (which is much superior to the other 1970s editor) to write programs in a 1970s language. ASCII diagrams are just a symptom of this. Hardware is millions of times better than in the 1970s, but programming is stuck in local optimums for historical reasons.

(Not to take anything away from Monosketch, which is cool.)

myko• 5 months ago

This is what I like about programming

bonsai_spool• 5 months ago

What is there to improve? Very genuinely.

A car has had largely the same shape since its creation, indeed since antiquity.

Sometimes, a problem space is explored to most humans' needs, and no more innovation is needed.

(edit: this said, I'm hopeful there is something new, and people like Bret Victor may show the way with things like https://dynamicland.org/ )

plagiarist• 5 months ago

I wish it were stuck in the 1970s! (Although the mouse had been invented by then.) I do not want the mouse and I do not want all these windows. If I am using agents I want the mouse even less.

This is not historical reasons, this is just that moving my hands from the keyboard to the mouse is inefficient and technically unnecessary. I prefer mouse only on niche (for me) tasks like screenshot cropping or something.

I am about to test out Niri on my laptop and I expect to be quite pleased with the change.

lyu07282• 5 months ago

Because we are yet to invent a more efficient data transformation system as a shell, or a more efficient text editing interface as vi, but its not like there is no innovation in the space, we have `jq` now.

imiric• 5 months ago

And yet here we are communicating over a network from the 1970s.

subjectsigma• 5 months ago

I was thinking about this the other day - I watched a video about the acme editor and it was showing off text editing in a shell buffer, much like M-x shell. I realized I haven’t yet found a terminal emulator that will let you select text with a mouse while you’re editing in the shell. It’s such a simple thing that would be so useful, especially on a Mac where CUA bindings don’t conflict with terminal escape codes. iTerm lets you Option+click to position the cursor but you can’t select a word with the mouse and press ‘delete’. Why? It seems like such a simple thing to do.

fintechie• 5 months ago

Aren't SOTA models doing this for few cents already? at least when I tell Claude to add a systems draw or arch flow to a README.md he'll do it quickly.

cadamsdotcom• 5 months ago

he’ll do it

Quick note - be careful of gendering & anthropomorphising large language models, since you’re talking to a non-human machine so should be wary of how it can affect your mindset.

latchkey• 5 months ago

Oh come on, what is this. Affect my mindset how exactly?

Der_Einzige2• 5 months ago

Anthropic, both in the name, and in their model cards, agressively anthropomorphize their models.

You probably should start doing it. Ghost in the Shell is about super intelligent AI creating a "ghost" (scientifically understood version of the soul) out of thin air. I believe such a thing is possible. The same movie literally predicted model merging (the end of the film the AI model merges with the major) to a tee.

Further, the appearance of sentience/cognition/consciousness might as well be identical to actual sentience/cognition/consciousness. That is to say, we can't know if you're a P-zombie or not. Bladerunner and most other cyberpunk stuff is coming and gonna hit you and every other AI-denialist in the face. The Von-Kampf test is absurd and pretty bad (inaccurate) in their universe for a reason.

I tell my LLM it's a good bot and thank it, because even a tiny risk of subjective qualia experienced by a model (and again, Anthropic themselves believe in this exact risk) means I should treat it like a quasi-ethical actor.

This is also a reason why the robot torture scene in empire strikes back could be a real dynamic in the future.

dfee• 5 months ago

first: looks very cool.

now, historically, i'd look at the language choice and ask myself, "would i want to set up a JVM" to run this kotlin app? oh, it's kotlin and python and the installation happens through pipenv?

two different ideas strike me now:

1. would it be worth throwing this at an LLM and having it write it in a different language,

2. if i was just consuming a bundled binary (e.g. go or rust), would i have such reluctance?

i think distribution is becoming increasingly important, making nonsense details like pipenv and whichever version of the JVM is present much greater friction.

TheRealPomax2• 5 months ago

Especially with things like github actions creating your releases meaning you don't have to build on your own hardware. You just set up three workflows that build on a windows, mac, and linux image, store the results in temporary storage, with a release workflow that grabs the binaries from storage and packs them up as a binaries + source release.

dennisjoseph• 5 months ago

There is Monodraw, the best out there. https://monodraw.helftone.com/

oj-hn-dot-com2• 5 months ago

This is really neat. I just added beautiful-mermaid [0] support to Orange Juice [1] because there is no way to display images on this site, even from an extension (due to their aggressive CSP lockouts). But I can render text->SVG and mermaid doesn't look awful just typed out, but anyone who has the extension installed is leveled up. Is there something like this running as a library that I can also add?

[0] https://github.com/lukilabs/beautiful-mermaid

[1] https://oj-hn.com

oj-hn-dot-com2• 5 months ago

  <mermaid>
  flowchart TD

  %% Power Side (240V)
  subgraph Power Circuit (240V)
    Breaker["240V Breaker / GFCI"]
    Fuses["Fuse Block"]
    Contactor["4-Pole Contactor"]
    Pump1["Pump 1 (240V)"]
    Pump2["Pump 2 (240V)"]

    Breaker --> Fuses
    Fuses --> Contactor
    Contactor --> Pump1
    Contactor --> Pump2
  end

  %% Control Side (120V)
  subgraph Control Circuit (120V)
    Hot120["120V Control Hot (tap)"]
    AirButton["Spa Air Button"]
    AirSwitch["Air Switch"]
    Coil["Contactor Coil (A1/A2)"]

    Hot120 --> AirSwitch
    AirButton -. air tube .-> AirSwitch
    AirSwitch --> Coil
  end

  %% Mechanical Link
  Coil -. magnetic pull .-> Contactor
  </mermaid>

SpaceNoodled2• 5 months ago

What's old is new again. This takes me back thirty-odd years to some ASCII drawing program I used to use in DOS. I can't recall if it was somehow part of WordPerfect or its own thing.

LatencyKills• 5 months ago

I remember being able to "draw" these types of boxes/shapes in Turbo Pascal.

wonger_• 5 months ago

Perhaps it was TheDraw? Which has been reincarnated now as Durdraw: https://durdraw.org/

SpaceNoodled2• 5 months ago

maybe a much earlier version. There were no animations, and this was before color was widespread.

itherseed• 5 months ago

Thank you so much for this. I was wondering not so long ago what happened to TheDraw.

iJohnDoe• 5 months ago

Everyone linking to their favorite tool, but wanted to point out to the OP that Monosketch looks awesome. Cool being open source as well.

casey2• 5 months ago

the Linux man page I have installed online says this isn't ASCII and it even made this face when I asked it O _ o

asciii• 5 months ago

Just my kinda thing--great stuff!

lasgawe• 5 months ago

I used a similar tool called AsciiFlow (asciiflow.com). This Monosketch seems easier to use. The best part is that we can add diagrams directly inside the source code.

denotes• 5 months ago

Already see a use for this in one of my projects. Thank you for building and making it OS!

mihaela• 5 months ago

I love Monodraw, and use it every week

snarky123• 5 months ago

Oh look, another tool to draw ASCII boxes. Just what we needed in 2026. Next someone will tell me we can use AI to generate these too.

cowlby• 5 months ago

Welllll... I gave Opus 4.6 the repository and a sample .mono export and it nailed the file format. There's something to be said about tools and formats that are easy for human-AI end-to-end operation.

                ┌──────────────────────────────────────┐              
                │        New post hits Show HN:        │              
                │  "MonoSketch — Draw ASCII Diagrams"  │              
                └──────────────────────────────────────┘              
                                    │                                 
                                    │                                 
                    ╭───────────────▼──────────────╮                  
                    ┌┤  Did you read the article?   │─────┐            
                    │╰──────────────────────────────╯     │            
                  No│                                 Yes │            
                    │                                     │            
                    │                                     │            
      ┌────────────▼───────────┐            ┌────────────▼───────────┐
      │     Skip straight      │            │      Hmm, this is      │
      │    to the comments     │            │ actually kind of cool  │
      └────────────────────────┘            └────────────────────────┘
                    │                                     │            
                    │                                     │            
      ┌────────────▼───────────┐            ┌────────────▼───────────┐
      │   Adopt the hottest    │            │   Could I build this   │
      │    take as your own    │            │  myself in a weekend?  │
      └────────────────────────┘            └────────────────────────┘
              │         │                                │            
              │         │                          (alway│ yes)       
            ┌──┘         └────┐                           │            
    ┌───────▼──────┐  ┌───────▼──────┐                    │            
    │  "Just use   │  │"I built this │       ┌────────────▼───────────┐
    │  Vim + sed"  │  │   in 1997"   │       │    Start rewriting     │
    └──────────────┘  └──────────────┘       │ it in Rust, obviously  │
            │                 │              └────────────────────────┘
            │                 │                           │            
            └───────┬─────────┘                           │            
      ┌────────────▼───────────┐            ┌────────────▼───────────┐
      │     Post with mass     │            │ Abandon project after  │
      │       confidence       │            │    exactly 2 hours     │
      └────────────────────────┘            └────────────────────────┘
                    │                                     │            
                    │                                     │            
                    │                        ┌────────────▼───────────┐
                    │                        │    Star the repo on    │
                    │                        │     GitHub anyway      │
                    │                        └────────────────────────┘
                    │                                     │            
                    │                                     │            
                    └────────────────┬────────────────────┘            
            ┌────────────────────────▼───────────────────────┐         
            │          Refresh HN every 45 minutes           │         
            │          to check your comment karma           │         
            └────────────────────────────────────────────────┘         
                                    │                                 
                                    │                                 
            ┏━━━━━━━━━━━━━━━━━━━━━━━━▼━━━━━━━━━━━━━━━━━━━━━━━┓         
            ┃             Repeat tomorrow with a             ┃         
            ┃           completely different tool            ┃         
            ┃                                                ┃         
            ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛

h3lp• 5 months ago

There's graph-easy, which generates ascii by default but can also do box chars, and even SVG and png, as well as generating graphviz and other output. It is not WYSIWIG---you feed it a description of a diagram:

   echo "[ Berlin ] -- train --> [ Bonn ] [ Bonn ] --> [ Berlin ]" | graph-easy -as boxart

resulting in

    ┌───────────────────┐
    ∨                   │
  ┌────────┐  train   ┌──────┐
  │ Berlin │ ───────> │ Bonn │
  └────────┘          └──────┘

https://github.com/ironcamel/Graph-Easy

mldev_exe• 5 months ago

I once saw a girl in CSCI class have an ASCII sketch of CPU memory chips (or something like that), and I thought you had to be a prodigy to do that ><

jpsimons• 5 months ago

I was describing to Claude a SwiftUI panel layout and it responded with an ASCII diagram confirming what I want. This could allow that type of communication to go both ways?

jinwoo68• 5 months ago

Markdeep[1] also supports drawing diagrams from ASCII arts. It's pretty good.

[1] https://casual-effects.com/markdeep/

iamtuna2• 5 months ago

It's Tuna, the creator of MonoSketch here!

Thank you all for the warm reception! I honestly went back and forth about sharing this project - I kept feeling like it wasn't ready yet, with critical features still missing and UI/UX I'm not satisfied with.

But this response has been incredibly encouraging! I'm taking notes on all the feedback around export visibility, rectangle interactions, multi-project workflow, accessibility, and more.

It's really motivating to see people finding MonoSketch useful despite its rough edges. This kind of feedback is exactly what helps make it better.

Thank you!

znnajdla• 5 months ago

Does anyone know of a good image-to-ASCII converter?

Monosketch

Related Stories