Affordable adjustable standing desk

http://www.wired.com/2014/11/ikea-bekant-desk/

by justjico • 12 years ago

162 88 12 years ago

lnanek2• 12 years ago

Honestly, I think spending this much money is a little strange. I have a $20 adjustable piano keyboard stand that does fine. It takes all of 30 seconds to adjust the height by loosening a knob and moving the leg props to a different notch.

rosser2• 12 years ago

It "does fine" ... for you.

Based on your description, it sounds like you probably live in your laptop. Other folks don't, and a hand-adjustable keyboard stand may not work very well for them. Imagine, for example, trying to raise something like that — even assuming it could take the weight — while using multiple monitors.

ics• 12 years ago

assuming it could take the weight

One would hope... 88-key keyboards are 45lbs (about twice a normal 27" monitor) and the older ones are significantly heavier... a non-POS stand should take >120lbs without a hitch.

That being said, there's certainly nothing wrong with a product better tailored for its purpose.

Poiesis• 12 years ago

Maybe that would work for many people, maybe it wouldn't—but it'd be nice if you included a link so that people could decide for themselves. It's an interesting idea but the first ones I found didn't seem to adjust to the height needed (obviously they exist, though).

swift• 12 years ago

Where the cost comes in is if you want to support multiple monitors (which, as someone who plays keyboard, I wouldn't trust to a cheap keyboard stand even if they could fit) and especially if you want to do it at a height that is comfortable for a tall person. At 6'3", most of the cheap options just don't go high enough for me.

pbreit3• 12 years ago

I think it's much stranger to question spending $500 on one of the most important tools of pretty much every office worker. My goodness.

imroot• 12 years ago

The adjustable frame/movable base for the geekdesk can be found on alibaba for less than $200/shipped. I bought the frame, then went to Lowe's and had a semi-custom countertop made for my frame, and my end cost was around $350.00. Custom geekdesk max, minus the $1000+ price tag.

Khao2• 12 years ago

Could you share a link to alibaba for the product you bought? How's the quality of the one you got?

stevesearer2• 12 years ago

Here's a good start: http://www.alibaba.com/trade/search?fsb=y&IndexArea=product_...

Jiecang and Linak are popular suppliers to a number of US companies who use the bases, add their own desktops, and distribute to US customers for $500-$1000

zo1• 12 years ago

Since I was curious, and the Jiecang link the sibling posted was for minimum 100 piece orders, I had a look.

Here you go: http://www.alibaba.com/product-detail/working-lifting-table-...

This is the search I used, if you're curious: http://www.alibaba.com/trade/search?fsb=y&IndexArea=product_...

#Edit: Extra link

untothebreach3• 12 years ago

Is anyone else having a problem getting to the product site? Clicking the link in the article takes me to http://www.ikea.com/us/en/catalog/categories/departments/wor..., and it doesn't seem to be listed under the "Bekant" line.

Maybe it isn't available in the US yet?

chton• 12 years ago

According to http://www.fastcoexist.com/3037899/we-took-ikeas-new-automat..., it isn't being released just yet due to a production problem. It was on the IKEA website a few days ago, so they probably just took it off for now.

untothebreach3• 12 years ago

Thanks, nice find! My google-fu failed me.

click170• 12 years ago

Is anyone else as confused by this explanation as I am?

"Unfortunately, Ikea isn't releasing the Bekant just yet. After sending tryout models to journalists, it emailed to say that there was a problem with the labeling. No word on when it will be in stores, though a spokesperson says, \"it’s not a quick fix.\""

Labeling problem? Not a quick fix? A labeling problem? o.0

Whatever it is, I hope it's resolved soon, I'm quite interested!

stock_toaster• 12 years ago

Same problem here.

dj-wonk• 12 years ago

I tried about a week ago, but I couldn't get past the shopping cart.

alphang• 12 years ago

And it's not even listed on the Ikea Canada site.

kareemm2• 12 years ago

I called two Ikeas in BC and according to them they're still waiting on an ETA for this desk.

kawsper• 12 years ago

Same in UK.

It's really strange because in Denmark it is really common to have height-adjustable tables in all the offices, but in London I haven't seen one.

jewel• 12 years ago

Last time I looked at getting a standing desk for my office at home, I decided it'd be cheaper to get a third monitor and a second keyboard and mouse. They would go on a permanently-standing-height desk next to my regular desk.

In linux you can reconfigure displays using the `xrandr` command. A keyboard shortcut would then toggle between the two desks.

r00fus• 12 years ago

So I assume you also have a 2nd set of keyboard/mouse with the standing monitor? Regardless, I would much prefer having all three monitors on a large rising/lowering platform.

I don't think $500 breaks the bank here - it's an expensable item, costs less than a high-end smartphone, and probably has much better ROI.

ilamont• 12 years ago

I am using a $50 standing laptop desk that I got from Amazon:

http://www.amazon.com/gp/product/B001BBNROI/ref=oh_aui_detai...

It doesn't have a huge table surface, but the height is adjustable and it has rollers if I want to move it around (a feature I use every day).

pbreit3• 12 years ago

I wish there were some more options like that that didn't look like crap.

DontBeADick3• 12 years ago

Cool, but why not buy a tall stool or drafting chair that matches the height of the desk instead of figuring out all these convoluted ways to lower the entire desk? The whole idea is to sit less, so it shouldn't matter very much how comfortable your chair is.

I use an $85 stool with my standing desk (the bare-bones kind you'd see in high school science classrooms), and I prefer it over any of the $300+ office chairs my employers have provided in the past.

(edited for clarification)

iamthepieman• 12 years ago

I would like to agree. My Yankee sensibility tells me I don't have to spend hundreds of dollars when the goal is simply to stand up at my desk. For the few times I need to sit I can use a stool as you suggest.

That said, I've been sitting at desks for decades. I'm a little reluctant to buy or build a high desk with the assumption that I will be able to stand at it all day and be productive. The adjustable desks give you a "way out" even if it's just for a few hours a day while you get used to it. I think that's why they are popular. Few people want to commit to a change like that and all the ways to "Try" a standing desk are nearly as much effort as the ~$500 is worth. especially if you are counting it as business or office expenses as I would.

In my case it would be $85 for the stool, plus a few hours labor and materials to build a little stand on top of my existing desk which includes a trip to the lumber yard. Then if I like it I go out and buy a permanent standing desk for about $150 and I'm rapidly approaching the same cost as if I had just gone and bought the adjustable desk in the first place.

DontBeADick3• 12 years ago

It's surprisingly cheap/easy to put the whole thing together with things from Amazon and IKEA. For example:

    4x Olov 36" legs [1] = $60
    1x Linnmon 47" x 24" table top [2] = $20
    whatever small shelf will fit your monitor(s) = $20
    1x Adjustable Stool [3] = $85
    Total = $185

Just be aware of the heights. If you're over 6' tall, you'll probably need to put the desk on a $10 set of bed risers (or spring for the $30 Gerton legs that adjust over 40") and you may need the 6430HB stool instead of the 6424HB. The price on those should be within $5 though.

[1] http://www.ikea.com/us/en/catalog/products/30264301/

[2] http://www.ikea.com/us/en/catalog/products/00251343/

[3] http://www.amazon.com/National-Public-Seating-6424HB-Upholst...

jessaustin• 12 years ago

Do you mean that people should have a fixed standing-height desk, and also a tall chair they can either sit in or not? That is actually my current solution (desk cobbled from adjustable shelving plus a 3' length of used countertop, tall chair from Walmart), but it took me a few read-throughs to get that as a possible interpretation of your comment.

DontBeADick3• 12 years ago

Yes -- a tall desk and a tall chair to match it. Then you should have no need to adjust either unless you somehow become wheelchair-bound by an injury.

It also gives you the option of leaning halfway on/halfway off the stool with one foot on the floor (to avoid the awkward pelvic tilt that a lot of office chairs cause).

pbreit3• 12 years ago

Since most desks don't adjust easily, that is by far the most common seating choice for stand-up desks.

Yizahi• 12 years ago

My mind just went "Wat?! Just buy a buy a bar chair and don't spend 400-600$ for high-tech table?". Some part of me now hates you :) . Thanks for the idea.

NhanH• 12 years ago

I've always thought that standing desk need to be adjustable not because you might want to lower it all the way down to use as a normal desk, but rather because without fine-grained adjustment, it's impossible to use the desk standing: a couple centimeters too high or low will quickly make it a nightmare experience.

spott2• 12 years ago

A desk that is adjustable is cheap... a desk which changes height VERY easily is expensive.

stronglikedan2• 12 years ago

In my personal situation, this isn't feasible, because I have a very hard time sitting in chairs where I cannot plant my feet firmly on the ground in front of me. I can only dangle my feet, or plant them underneath me, for a few minutes. After that, my back starts to hurt terribly bad, and stays that way for a while.

I wish the solution was that simple for me. If I were the type of person it would work for, I would definitely go the stool/highchair route over an expensive adjustable desk.

coreymaass• 12 years ago

This has been my setup for about a year now. Building a standing-only desk is relatively simple. I built this last weekend in 4 hours for about $50 http://bit.ly/1A6NSlk I use it with this height-adjustable stool http://www.amazon.com/Boss-B16245-BK-Caressoft-Medical-Draft... The stool is comfortable enough, meaning it actually gets a little uncomfortable after a few hours, making me want to stand for a while.

micro_cam• 12 years ago

I'm doing this but I've found that having my feet suspended or only on the foot rest can lead to joint pain. I've set up a bench for my feet under the desk as a temporary solution but may spring for one of these ikea things and a nice chair in the future.

Also as a fairly active person (I run, ski, hike, bike, do yoga and climb pretty regularly) with aging joints I've found I need true rest/recovery time enough that standing the majority of the time doesn't work well for me.

supergeek133• 12 years ago

I bought a StandDesk via the KickStarter, it's more affordable than most decent offerings out there. The only pain was the surprise shipping charge at time of delivery (it was way more than advertised).

Regardless, I'm excited to see more of these options.

hoka• 12 years ago

Not to mention the current refund fee of 15%..what a nightmare. Reading through their twitter and facebook walls is spooky to say the least.

jimmyrustle• 12 years ago

I had a really bad experience with StandDesk too. Total bait and switch, and they price-gouged on shipping. Poor customer service -- I eventually got a refund, but only 85% of what I paid. Definitely a company to avoid.

jxpx777• 12 years ago

I bought one as well and have yet to receive it. After I paid the $138 shipping (to Texas), a friend tipped me off to their FAQ page where they're advertising free shipping for preorders. http://www.standdesk.co/faq.html By my calculations, I paid an extra $58 for the privilege of funding them on the second day of their Kickstarter. Lucky me!

So, I emailed them and explained how burned I felt by the whole thing. They argued with me that preorders are not being given free shipping. So, I pointed them to the FAQ page. This was on October 15. As of November 4, 2014 at 3:10 PM CST, their FAQ page still says preorders will receive free shipping. If they're not honoring that for preorders, I'd be super angry if I were trying to preorder the desk and got bait-and-switched into paying shipping when they're clearly advertising otherwise. And, lo these three weeks later, the FAQ still tells me I paid an extra $58 for my desk that I paid for in May.

Beyond that, communication with these jokers has been spotty, spread across various social media channels. (It looks like they abandoned Twitter months ago. Friday and today were the company's first activity on Facebook since May.) The Kickstarter page saw very little activity over the summer and then Steven Yu posted a long "we're sorry" post explaining some of the unexpected things that happened to delay shipping and to affect the shipping costs. Every item in the list is something that would have been totally understandable if it had been shared as it was happening. Instead, the company chose to go radio silent. From my point of view, when I've sent someone more than $500 for a product that doesn't exist yet, that radio silence leads quickly to that sinking feeling of having thrown away a bunch of money. Some honest communication about the situations would have just gone so far to not burning through whatever good will the Kickstarter backer community had toward them.

Luckily, it seems that this long nightmare is about to be over and desks are leaving their warehouse. On October 17, I was told via email that my desk was scheduled to arrive "in 2 weeks" and that they would get it processed and out to me "as quickly as possible". Friday I emailed to ask about the status, and as you can guess, I haven't heard anything back.

Overall, the experience with StandDesk has been frustrating and uncertain and after all this delay, they're letting others like IKEA to catch up. For my part, I'll be thrilled to receive my desk, but mostly just so I can never have to deal with this company again. With any luck, packaging and delivery will be good enough that they won't have availed themselves of literally the last opportunity to vex me.

jcrites• 12 years ago

Switching to a standing desk several years ago had a significant positive impact on my stamina and energy level, and probably health overall.

I always used to get tired walking around a city, like on vacation. After a few months of standing, I went on vacation to Paris and immediately noticed a gigantic improvement in my standing and walking stamina. I was the last person to get tired, instead of the first. I could walk around a whole day and be fine!

Beyond that, there were ergonomic benefits for me. I have always found it difficult to use a computer properly in a chair. I'd find myself leaning on a hand rest, or on the desk, etc. These postures are more likely to strain the body. I found myself in minor discomfort and thought: "if I'm going to be doing this job a long time, then I had better find the optimal posture".

The proper posture according to my company's ergonomics advisor is: allow your arms to hang limp at your sides; then without moving your elbows, rotate your forearms to bring them up in front of you, parallel to the ground. Your keyboard should be under your hands in this position. Again without moving your elbow, rotate your primary hand outward (staying parallel with the ground). Your mouse should be comfortably reachable with this movement. If you must extend your elbows, reach, etc., then those motions put you at greater risk for stress injury.

It is very difficult for me to achieve that posture while sitting in a chair - the keyboard and mouse need to be in your lap, basically. (Try the motions I described while sitting and standing and you'll see what I mean.) It was difficult for me to get the right posture while sitting; keyboard trays can do it but are clumsy.

Getting the correct posture in a standing desk is easy: make that "arms out front" motion I described. Imagine yourself standing at a counter with your arms just over it. A keyboard sits under your hands. That's where the standing desk should be, and getting it right primarily entails selecting the correct height of standing desk. The man in the picture/video in the article seems to be demonstrating this pose.

If you work at a computer all day, and likely will for the rest of your life, then you owe it to yourself to get a standing desk. Best office improvement I made in my life. Hope this helps! Happy to discuss further with anyone interested - reach out!

JoshTriplett• 12 years ago

It is very difficult for me to achieve that posture while sitting in a chair - the keyboard and mouse need to be in your lap, basically.

I found that I could manage that posture with a sufficiently adjustable chair and height-adjustable desk. I adjust the chair until it provides the correct height off the ground (feet touching, hips at the right angle), then adjust the desk and the chair arms until the chair arms go just over the edge of the desk, allowing arms to rest on them and use the keyboard naturally.

(Also, I use a USB ThinkPad keyboard, so my mouse is on home row, not off to the side.)

mbell• 12 years ago

Personally, I can't get into the 'proper' position when sitting at all, my arms are too long. I'm 6'2" ~190lb and when sitting in an ergonomic chair with proper posture, my elbows are within an inch of the top of my quads. Attempting to sit properly at a desk requires my quads to be jammed into the underside of the desk which is horribly uncomfortable. The only thing that is comfortable when sitting is raising the desk up a lot and extending my arms way into the desk to the point where my arms are nearly at shoulder height.

razzberryman• 12 years ago

I use a USB ThinkPad keyboard, so my mouse is on home row, not off to the side.

I switched a tenkeyless keyboard for the same reason... my mouse is now a lot closer to the center of my body and this has reduced shoulder strain immensely.

silencio• 12 years ago

Caveat to others from my personal experience: take it easy and go see a doctor if you have any problems while transitioning to standing. Standing caused nerve damage in my legs. I have the stamina to walk around all day but not to deal with the possible pain arising from it. Makes me sad and there was no way I would have known this would happen beforehand.

frankzinger• 12 years ago

Standing caused nerve damage in my legs

As a standing worker I would be very interested in hearing more about your nerve damage.

rebootthesystem2• 12 years ago

The ergonomic problem isn't about standing vs. sitting. It's about having a properly designed desk. The traditional 29 to 30 inch high writing desk isn't ergonomically correct for extended computer use.

Many years ago, after developing intense pain in my wrists and shoulders I decided to look into it. I was spending 14 to 18 hours a day in front of the computer (which was part of the problem, of course).

After many experiments I finally arrived at a desk design that worked wonders. I welded the frame out of mild steel for rigidity --which I found was important-- and surfaced it with plywood and formica. It's a two level desk with the front dropped down to about 26 inches. The drop alone wasn't enough. The front edge of the keyboard shelf has a 1.5 x 1.5 inch piece of oak running the entire width. This piece has a generous radius and is highly polished and waxed.

During use your arms hang naturally on your sides. Your forearms are pretty much parallel to the floor and a point just behind your wrists rests on the oak support. Picture your hands lightly hanging into a cavity that contains the keyboard and trackball. No muscular tension to speak of.

This made ALL the pain go away and the carpal tunnel soreness evaporated. I went from being on a road to surgery to, well, feeling perfectly normal, even after extended sessions. And, BTW, ditching the mouse was a huge part of this. Mice introduce tension. A thumb operated trackball does not (after you get used to it).

I also like to work standing up but recognize that comes with it's own set of issues.

imjared• 12 years ago

Do you have pictures of this anywhere? I'm pretty young (28) and worried a bit that I might be going down this path. I seem to be dealing with injury after injury while training for my running races and am fairly convinced that part of it is due to muscle tightness and tension from sitting so much during the day in a bad setup.

wuliwong• 12 years ago

We have a crank standing desks at work. Everyone has the same pattern. Once they crank it up, they stay standing for days. And once it gets cranked down, they sit for days. I'd love to have this motorized option.

I was surprised at the shape of the desk. Anyone care to speculate as to why they didn't go with a plain rectangle shape? I'm a big fan of the plain rectangle, not sure I want to spend $500 on something else.

33W• 12 years ago

We've got electric motor ones in the new office I moved to recently. It is quite nice to switch back and forth throughout the day. 2 or 3 days per week, I will move to standing 2-3 times for 30-45 minutes. The other days I'm seated the whole day, but those seem to be the days that I'm moving to and from meetings.

Generally, I would say that 75% of people stay sitting most of the time, 15% will stand for about an hour per week, and the last 10% (including myself), stand fairly regularly.

I particularly like to raise it when I have others visiting my desk, it is nice to have everyone on the same level (literally, then hopefully figuratively).

bronson• 12 years ago

A motor is a lot better than a crank but still a little tedious. Make sure you can hit the button once, do something else for a minute, then come back to find the desk at the right height.

My favorite so far are the pneumatic/spring desks. Someone walks into your office, two seconds later you're standing side-by-side pointing at things. When you're done, it's just as easy to go back down.

There's still a lot of room for improvement though, no matter which desk you end up with.

leejoramo2• 12 years ago

Many of the legs and desktops for Ikea desks are interchangeable. So it maybe that the video just features the corner style. In fact within the Bekant line, I see quite a variety of desktops. Since Ikea has pulled the motorized legs off of the site, it is hard to say if they are compatible with any/all of the tops.

http://www.ikea.com/us/en/catalog/categories/departments/wor...

andrewvc• 12 years ago

Why are they demoing this 'ergonomic' desk, with such an unergonomic monitor configuration? If you don't raise the monitor up, and keep the keyboard level down to keep the right angles you'll be asking for pain.

The point isn't just to stand, but it's to stand and have proper form, otherwise you're just asking for pain.

You need something like http://www.ergodesktop.com/content/kangaroo-pro to actually have ergonomic angles!

simonmales3• 12 years ago

Agreed. My biggest problem is people using standing desks, but the monitor at chest height or lower.

(Bearer of neck pain)

hudibras• 12 years ago

Using this right now; love it.

WorkFitC4Win• 12 years ago

The only real/ergonomic solutions are these:

http://www.ergotron.com/portals/0/html/exploreWorkFitAll/mat...

I use the WorkFit-C for about 10 years now and I can tell you: With this one, the standing desk discussion is over!

chromaton2• 12 years ago

I use an Ergotron monitor arm to move my monitor between sitting and sanding positions. When I stand, I put my keyboard and mouse on a small shelf. There's really no need to move the whole work surface up and down.

hindsightbias• 12 years ago

Someone should do a skit with people throwing Aerons into dumpsters.

Frame: http://www.ikea.com/us/en/catalog/products/10117561/ + whatever table top you want: http://www.ikea.com/us/en/search/?query=table+top + bed risers if you're 6' or over.

Hard to break $200. These are geek sexier and some are adjustable: http://www.simplifiedbuilding.com/projects/category/furnitur...

jgwest• 12 years ago

Wait... IKEA??? $489??? SOLD!!! Don't even need to know anything more... SHIP IT!!!

djrogers• 12 years ago

$489 is a mere $10 cheaper than the electric, fully adjustable desk I bought over a year ago. http://www.scandinaviandesigns.com/office/desks/network-plus...

Mine was $499, and is made of slightly better materials than the average ikea desk (i've owned plenty of those, nothing wrong with them).

Guess SD should have been advertising them on Apartment Therapy!

kareemm2• 12 years ago

It looks like the desk is $499 but that doesn't include the price of the desk-top. Is that true?

frandroid• 12 years ago

The "Wall bureau" is pretty neat too. So neat that it's the Royal Ontario Museum's collection... http://www.andrewjonesdesign.com/f-wallbureau.html

louhike• 12 years ago

Maybe it is because I'm not familiar with adjustable standing desk and the complexity needed, but I was disappointed by the price. Does it really need to be adjusted through electronics? I was hoping to see something really simple, cheaper no electronics. But as I said, I'm not familiar with this kind of product.

leejoramo2• 12 years ago

I have used very good standing desks that used springs or pneumatics. They were easier to use and faster to adjust position. They were also much more expensive and heavier than the ones I have seen with electric motors.

Other methods that use sliders with bolts or pegs, telescoping tubes with compression rings, and the like can be MUCH cheaper, but almost impossible to adjust if there is any thing on the desk. The are mostly used to set once an leave.

spott2• 12 years ago

I think the problem is that it needs to be effortless to change. Either a complicated counterweight system so the desk can be raised or lowered smoothly with only a little effort, or electronically.

Honestly, electronically is probably easier.

seanmcdirmid• 12 years ago

Not to mention electronic is probably cheaper than an equivalent mechanical solution with lots of hydraulics and moving parts.

simonmales3• 12 years ago

I find it really odd that I would need to plug in my desk into the power grid.

Having crawled under enough office desks searching for a free power socket, the idea of a hand crack is very appealing.

Though the other commenters do make good points, I do imagine an electrical version would potentially be lighter.

chromaton2• 12 years ago

I should probably submit this as a story as it keeps coming up. I have a very nice sit-stand setup that I put together for less than $200. You can do the same provided you have 1) a regular desk and 2) a wall.

http://planiverse.wordpress.com/2014/01/10/building-a-sit-st...

NDizzle• 12 years ago

I have a mechanically adjustable desk from http://multitable.com/ - the hand crank is kind of pleasing. It's not as fancy as the electric motor desks, but then again it doesn't have an electric motor...

I'm actually using a tabletop that I bought from Ikea for the desk surface. I just bought the bare frame for the desk from multitable to keep costs down.

I think all in all I paid around $600. It's pretty nice.

simonmales3• 12 years ago

Thanks for sharing this! A desk with an electric motor is a little odd to me too.

kolev• 12 years ago

$500 is not truly "affordable". Yeah, it's a bit more than half the price of the cheapest Biomorph desk, but that's it. My IKEA desk (Jerker) was just $99 and it can be assembled as a permanent standing desk. Add a stool to it and you can have it both ways - that's the option we had at Oakley.

dba7dba• 12 years ago

Any idea how log it takes to assemble it? Few years ago my work bought one for a star programmers. And i remember 2 people taking half a day to assemble it. It also had motors for up/down movement...

i would love to get one at work and home.

d4m0• 12 years ago

I already have an Ikea standing desk. Well it's an Ikea book shelf sitting on a desk.

https://www.dropbox.com/s/3z473x9kco92c8f/standing%20desk.jp...

The key ingredient is the adjustable monitor pole so that I can sit on the odd occasion that my legs get tired.

The beauty of this setup is that it works in with the fitted desktops that my company has. I wouldn't be able to remove a section and slot in a normal adjustable desk.

nickbauman• 12 years ago

I own this one:

http://www.ergodepot.com/Ergo_Depot_adjustable_desk_AD17_p/a...

I got mine at $480 (I got it without a top: I made my own) delivered to my door a couple of years ago. It's a single column with wheels in the back, so it's compact and transportable. I push and pull it around in my office very easily. The only problem with the single-column design is it wobbles a bit when cranked up. This doesn't bother me. Otherwise it's _probably_ built better than the Ikea one.

grimman• 12 years ago

The Bekant—Swedish for “friend”

No! For anyone reading it and thinking it's accurate, it's most certainly not, and the author should be ashamed! "Bekant" means "familiar" or "acquainted".

h-• 12 years ago

The downside of a standing desk: Standing still for long periods of time can cause permanent damage to the veins in your legs and lead to varicose veins. http://en.wikipedia.org/wiki/Varicose_veins#Causes

jreed91• 12 years ago

If want a combination of standing and sitting I recommend this. http://www.focaluprightfurniture.com

Affordable adjustable standing desk

Related Stories