Run GitHub Actions locally

by flashblaze • 1 year ago

273 133 1 year ago

igor47• 1 year ago

I've wanted this so much! My main questions are about permissions. I use environment-specific variables and secrets, I would need to reconfigure them locally and didn't see how. The other issue is workload identity federation.

GuinansEyebrows• 1 year ago

could you just source vars from an .env file? maybe a bit more work to get the secrets pulled down. i guess ideally you'd want to be able to pull those values directly from github as an option (including secrets) if that's your primary source of truth.

jlongman3• 1 year ago

Secrets can be loaded from a file.

https://nektosact.com/usage/index.html?highlight=Secret#secr...

iotapi322• 1 year ago

Lots of changes have to be made to your github action workflow to actually make this work properly.

mytydev• 1 year ago

What things have you needed to change? Can't say I've ever needed to do that but of course I've only used it on a few projects.

jlongman3• 1 year ago

In GitHub we use an OIDC token to access some AWS resources. Locally I need to populate tokens etc and so I have an `if: ${{ACT}}` and a not condition to populate it.

ryangg• 1 year ago

Just this week I tried giving this another chance to debug some weird CI failures for ruby tests. I’m on M-series macs so there is an inherent platform mismatch. That coupled with us using depot images as action runners. I was never able to get it running past the dry-run stage. There is just a lot of differences between CI runners and my local docker images. I even gave the image from catthehacker a try. Which is like >15GB. It still wouldn’t run. Finally gave up.

jlongman3• 1 year ago

It’s even worse than that, it’s 20GB compressed and 60GB uncompressed. Regardless, if your VM runs out of disk space there’s no meaningful error (well 12 months ago) except a failure to start. (Possibly colima-specific I dunno I uninstalled docker-docker)

I do find that some things just work locally and fail in real actions and vice versa. For the most part it’s made it easier to move the bar forward though.

suryao• 1 year ago

Something like this may help by letting you ssh into the running instance so you can debug with the exact context: https://docs.warpbuild.com/tools/action-debugger

larusso• 1 year ago

I had luck with my actions I tried to debug. But I also had the issue that the runtime difference is simply too big to 100% trust it. Too bad because I think the tool is quite good.

Ameo• 1 year ago

Sounds similar to my own experiences trying to debug GH actions locally.

I've tried twice now to get it working, pulling down many GBs of images and installing stuff and then getting stuck in some obscure configuration or environment issue. I was even running Linux locally which I figured would be the happiest path.

I'm not eager to try again, and unless there's a CI that's very slow or GH actions that need to be updated often for some reason, I feel like it's better to just brute-force it - waiting for CI to run remotely.

dcherman• 1 year ago

There's another alternative - debug in CI itself. There's a few ways that you can pause your CI at a specific step and get a shell to do some debugging, usually via SSH. I've found that to be the most useful.

90s_dev• 1 year ago

GH Actions have always worked flawlessly for me, as long as I don't ever do anything unusual.

Last week I moved from a custom server back to GH Pages + GH Actions, and broke a feature that depended on an out dir existing after one build phase and before another. I have no idea how to fix it. It's probably simple, I'm just burnt out.

lukevp• 1 year ago

Each job runs on a separate runner. If you want to pass data across, use artifacts to upload and then retrieve the specified file(s).

cedws4• 1 year ago

ChristopherHX publishes Docker images which are created directly from packing up the root filesystem into a tarball from inside a runner. The images are huge though.

https://github.com/ChristopherHX/runner-image-blobs/pkgs/con...

philistine• 1 year ago

My experience with Ruby on Apple Silicon as been far from seamless. The only way I could thoroughly get rid of problems was by running the most recent Ruby release and dealing with what THAT causes.

I’m pretty sure GH actions don’t run the latest Ruby version.

hk13372• 1 year ago

My experience with both Ruby and Python Apple Silicon has been hit or miss. Mise has made it a lot simpler and seamless but if you need an older version or the absolute latest when it is released, you might have some issues. Mise has helped a lot, I generally do not expect to get an error.

pxc5• 1 year ago

This is really only for debugging the logic of your Actions, isn't it?

On my team, Nix seems to work pretty well for encapsulating most of the interesting things CI jobs do. We don't use virtualization to run local versions of our jobs, and we don't run into architecture mismatch issues.

tagraves• 1 year ago

In my experience (and as reflected by the comments on this post already), trying to run complex CI workflow locally is a fairly hopeless enterprise. If you have a fully containerized workflow, you might be able to get close, but even then ensuring you have all of your CI specific environment variables is often not a trivial task, and if your workflow orchestrates things across tasks (e.g. one task uploads an artifact and another task uses that artifact) you'll have a hard time reproducing exactly what is happening in CI. My company (RWX) builds a GitHub Actions competitor and we intentionally do not support local execution -- instead we focused on making it easy to kick off remote builds from your local machine without having to do a `git push` and we made it easy to grab an SSH session before, during, or after a running task to inspect things in the exact build environment that your workflow is running.

esafak5• 1 year ago

For local development you can use .env files and mise. https://mise.jdx.dev/environments/#env-file

I use dagger to read these .env/mise env vars and inject dummy values into the test container. Production is taken care of with a secrets manager.

pydry• 1 year ago

It's amazing that Microsoft built a whole IDE and programming environment for builds but left all the debugging tools up to the community.

mdaniel8• 1 year ago

You don't get vendor lock in if you're able to run GHA on any compute you'd like (yes, I'm aware of self-hosted runners, and even that their Packer code is open source. That doesn't make it easy to use GHA outside of github.com)

brianhorakh• 1 year ago

WARNING: act is great if you use docker. Act does not support podman.

Issues or discussions related to providing support/coverage/compatibility/workarounds for podman are closed with a terse message. Unusual for an open source project.

organsnyder• 1 year ago

There's a long-open issue[1] for Podman support. Maybe they're just tired of dups?

[1] https://github.com/nektos/act/issues/303

sundarurfriend• 1 year ago

Seems like that was also closed for about half a year, maybe GP came across [this discussion](https://github.com/nektos/act/issues/553#issuecomment-791562...) during that period and (understandably) came to their conclusion from that.

joshstrange• 1 year ago

Last time I looked at it, Act was a lot like the “serverless offline” options out there that try to mimic AWS services. If your use case is straightforward then I might work but if you do anything “exotic” (often the types of things I’m trying to debug in a failed run) Act doesn’t fully replicate the GHA experience.

Also, understandably, there is no macOS support and I use macOS on GHA for iOS builds (another place I have to debug that this wouldn’t cover).

arclight_• 1 year ago

It's important to note that this tool does not use the same container images or runtime environment that GitHub Actions actually runs. It's an approximation.

For simple use cases that won't matter, but if you have complex GitHub Actions you're bound to find varying behavior. That can lead to frustration when you're debugging bizarre CI failures.

plumeria• 1 year ago

AWS Lambda publishes Docker images (e.g. public.ecr.aws/lambda/python:3.12-arm64), does Github Actions have something similar?

esafak5• 1 year ago

https://github.com/actions/runner-images

globular-toast3• 1 year ago

Yeah, this is lame. With Gitlab you can choose the exact image that runs and provide your own. So you can easily run the exact same code in the exact same environment locally.

I guess it would be nice to have a tool to convert a Gitlab YAML to Docker incantations, but I've never needed to do it that often for it to be a problem.

ElijahLynn• 1 year ago

GitHub really needs to support local development with GitHub actions. Sheesh. What a step backwards.

joshdavham2• 1 year ago

GitHub really needs to support local development with GitHub actions.

Agreed. I’m thankful for tools like act, but there really should be an officially supported way to run gh actions locally.

Gigachad2• 1 year ago

Feel like the correct way to use any CI these days is to just have it do almost nothing. The CI just triggers a script. And then you can run that script locally.

nrvn• 1 year ago

exactly. I am surprised by the amount of comments in this and similar threads praying for github to add more complexity to an already over-complicated and fragile solution.

CI must be local-first and platform-agnostic.

sureIy2• 1 year ago

I'm convinced that they specifically won't do that so that people won't use them to build competing products. Actions is one of the pieces that make GitHub money.

mdaniel8• 1 year ago

Actions is one of the pieces that make GitHub money.

How do you figure that? I'd buy "lock people in the platform," but in that way GitHub Issues has been the moat for far longer than Actions has

badmonster• 1 year ago

wow this is a popular project^_^

Which GitHub Actions context variables are emulated or customizable in act, like github.event, github.actor, or secrets

paulryanrogers2• 1 year ago

This didn't work for me. I found just running Ubuntu in VirtualBox was close enough for my use case.

franky47• 1 year ago

I would love for this to actually work, but apart from trivial workflows, it never replaced the dreaded game of CI ping/pong.

My alternative was to have a dedicated repository where I can spam the Git and workflow run histories as much as I need to experiment with workflows.

droelf• 1 year ago

I think this is really cool. We're tackling this problem from the other side by building `pixi` (pixi.sh) which bundles project / package management with a task runner so that any CI should be as simple as `pixi run test` and easy to execute locally or in the cloud.

claytonjy2• 1 year ago

that’s not really what’s new or special about pixi, is it? poetry (poethepoet) and uv can both do variations of this.

From the outside, pixi looks like a way to replace (conda + pip) with (not-conda + uv). It’s like uv-for-conda, but also uses uv internally.

Better task running is cool, but it would be odd to use pixi if you don’t otherwise need conda stuff. And extra super duper weird if you don’t have any python code!

pxc5• 1 year ago

My team has a setup that sounds essentially the same using Nix via devenv.sh. We deterministically bundle and run everything from OpenTofu and all its providers to our programming languages runtimes to our pre-commit hooks this way, and it also features a task runner that builds a dependency graph and runs things in parallel and so on.

Our commands for CI are all just one liners that go to wrappers than pin all our dependencies.

Lately I've been working with a lot of cross-platform Bash scripts that run natively on macOS, WSL, and Linux servers, with little to no consideration for the differences. It's been good!

ayrtondesozzla• 1 year ago

I'd be interested to know more about a team that uses Nix and Guix. Is there a website or email an interested party can contact?

2OEH8eoCRo0• 1 year ago

We have come full circle

samgranieri• 1 year ago

I’ve been bedeviled by arm/intel/Mac issues with this.

I want to be able to use this project, I really do. But it’s just not yet there, and this isn’t on Nektos. Nektos is, as best I understand it, trying to approximate GHA, but it’s not easy.

jt_b• 1 year ago

I've seen (but not used) this tool recently, which seems like it does a similar thing. Curious if it is any better experience.

https://github.com/bahdotsh/wrkflw

mdaniel8• 1 year ago

As someone with a deep interest in this space, I spent a non-trivial amount of time tire-kicking that. One can view the issues for my experiences, including the one where I wished the dev all the best but stopped playing QA for the project. It's goal is primarily a TUI for GHA, not an emulation for GHA

esafak5• 1 year ago

I try to do as much as possible in a (dagger) script and use the GHA to call it. That way I can test the script locally.

I wonder if there is a proposal to support code-based actions. Config-based CI needs to die.

spion• 1 year ago

Why dagger and not just... any language? (Nushell for example https://www.nushell.sh/)

esafak5• 1 year ago

Because I'm typically building and running tests in containers in CI, which is what dagger is for.

nu is my default shell. Note that I am not talking about dagger shell. https://dagger.io/blog/a-shell-for-the-container-age-introdu...

mikepurvis• 1 year ago

Yup. Every time there's one of these threads I renew my call for GHA to have hooks where in-band build tools like nix, bazel, dagger, and friends can propagate upward optimal information to be displayed in the web gui, in particular annotations and info about multiple tasks that run in parallel or series.

joshdavham2• 1 year ago

What are some recommended alternatives for act, if any?

I’ve been a long time user, but I’ve run into tons of problems with act over the last year and am wondering if there are better alternatives out there.

claytonjy2• 1 year ago

anyone have any tips for testing actions locally, rather than workflows?

Despite the name, act is really only for the latter. You can try to test a local action by putting it in a workflow and calling that, but if you do a checkout in your workflow that will overwrite the mount of your local code into the act container, meaning you’ll get the version from the remote branch instead. Depending on the action, you may not be able to comment out the checkout step while testing.

cedws4• 1 year ago

I needed to do this recently, the only way I could find was with a proxy workflow.

Daviey• 1 year ago

`act`is great, but it's still annoying dealing with secrets!

cyberax• 1 year ago

I'm convinced that the only way is to do the reverse. Make the Github actions just be a thin wrapper over docker-compose invocations.

notnmeyer• 1 year ago

like a lot of folks i found nektos lacking. instead, i focused on keeping the gha workflows really light and putting any complexity in Task (taskfile.dev)—that way the meat of the workflows can be run locally, and the gha syntax is just the glue.

it works out very well.

Kinrany• 1 year ago

Every mention of Github Actions is an occasion to start looking for the best alternative in <current_month>, let's go!

Is Dagger usable yet? Is there still hope for Earthly? Are general purpose workflow systems winning any time soon, or are we still afraid of writing code? Any new systems out there that cover all the totally basic features like running locally, unlike Github Actions?

manx• 1 year ago

I think we could build something on top of nix that is as easy to use and powerful as earthly, but gets all the nice stuff from nix: reproducibility, caching, just use any command from any nix package, etc

asdffdasy2• 1 year ago

that's actually the only good use for nix.

pxc5• 1 year ago

I built something like this out using an old version of Dagger and found it enormously complicated, and the they rewrote everything and abandoned the version of Dagger I used.

When I they did, I said "fuck it" and just started distributing a Nix flake with wrappers for all the tools I want to run in CI so that at least that part gets handled safely and is easy to run locally.

The worst and most annoying stuff to test is the CI platforms' accursed little pseudo-YAML DSLs. I still would like that piece.

devenv.sh tasks might be a good basis for building on it. I think maybe bob.build also wants to be like this

z_mitchell• 1 year ago

That's mostly what we've built with Flox [1] (though I'm not exactly sure what you mean by run any command from any Nix package). It looks and feels like an amped up package manager, but uses Nix as kind of an infrastructure layer under the hood. Here's a typical workflow for an individual developer:

- cd into repo

- `flox activate` -> puts you into a subshell with your desired tools, environment variables, services, and runs any setup scripts you've defined

- You do your work

- `exit` -> you're back in your previous shell

Setting up and managing an environment is also super easy:

- cd into project directory

- `flox init` -> creates an "environment"

- `flox install python312` -> installing new packages is very simple

- `flox edit` -> add any environment variables, setup scripts, services in an editor

- `flox activate` -> get to work

The reason we call these "environments" instead of "developer environments" is that what we provide is a generalization of developer environments, so they're useful in more than just local development contexts. For example, you can use Flox to replace Homebrew by creating a "default" environment in your home directory [2]. You can also bundle an environment up into a container [3] to fit Flox into your existing deployment tools, or use Flox in CI [4].

All that stuff I described is free, but we have some enterprise features in development that won't be, and I think people are going to find those very appealing.

[1] https://flox.dev

[2] https://flox.dev/docs/tutorials/migrations/homebrew/

[3] https://flox.dev/docs/reference/command-reference/flox-conta...

[4] https://flox.dev/docs/tutorials/ci-cd/

esafak5• 1 year ago

earthly is config-based, so it's in the same league as GHA in my book. https://docs.earthly.dev/docs/earthly-config

dagger is the only code-based solution. It works, but it does have some edges since it has a much bigger surface area and is constantly growing.

shepherdjerred2• 1 year ago

That's not really related... that config is machine specific, not really related to CI.

This is what Earthfiles look like: https://docs.earthly.dev/docs/earthfile

tomrod2• 1 year ago

How's Jenkins looking these days?

h4kunamata• 1 year ago

With Git Actions at full speed..... it is dying.

hybrid_study• 1 year ago

nyuk, nyuk, nyuk

Sleaker2• 1 year ago

Seems fine to me, I don't really understand why people think CI is hard and they need to shop a different platform. All these systems are is a glorified shell script runner. It seems like developers just keep making up new DSLs over and over to do the same things.

bastardoperator• 1 year ago

They use github actions

https://github.com/jenkinsci/jenkins/tree/master/.github/wor...

cmehdy2• 1 year ago

It's still a miserable experience to maintain it, update it, deal with mostly old plugins, dynamically loading the tooling, groovy idiosyncrasies.. and UI/UX that despite recent efforts continues to feel terrible.

Managing the underlying infra is painful, and it remains a security liability even when not making obvious mistakes like exposing it to any open network.

And good luck if you're having that fun at a windows shop and aren't using a managed instance (or 5).

IshKebab• 1 year ago

Still awful last I looked.

ed_mercer• 1 year ago

Can’t beat GitLab

akshayshah• 1 year ago

Earthly has pivoted away from their CI/CD products: they’re shutting down Satellite, and they’re stopping active maintenance of the Earthly open source project.

https://earthly.dev/blog/shutting-down-earthfiles-cloud/

globular-toast3• 1 year ago

Gitlab? It's been around longer than Actions, it's much better and honestly not sure why anyone would consider anything else (but happy to hear if there are reasons).

asdffdasy2• 1 year ago

because they didn't keep sha1 and so it's not promoted as heavily as gh.

/me puts tinfoilhat

m_mueller• 1 year ago

Let me throw another one out there: how about TeamCity on premise? Still can be done for free and the last time I used it (years ago) it left a very complete, stable and easy to use impression on me. Jenkins by comparison seems heavy and complicated.

cobbzilla• 1 year ago

Gitea can be easily self-hosted and supports Gitea Actions, which are largely compatible with GitHub Actions. I’m about to try it out. https://docs.gitea.com/next/usage/actions/overview

mdaniel8• 1 year ago

In the context of this submission, one will want to exercise caution because they and their forgejo friends are using forks of nektos/act, with all the caveats of both "act" and "fork"

https://gitea.com/gitea/act -> https://gitea.com/gitea/act_runner

https://code.forgejo.org/forgejo/act -> https://code.forgejo.org/forgejo/runner

shepherdjerred2• 1 year ago

I think Earthly is dead, but Dagger seems to be healthy still...

Earthly was amazing. The exact same setup in CI and locally. They're reviving it with a community effort, but I'm not sure if it'll live

eYrKEC2• 1 year ago

Anyone use kubernetes argo workflow for CI automation?

nomilk• 1 year ago

Dumb question, but why hasn’t GitHub made a solution that lets you run GitHub Actions locally? Or at the very least a solution that validates the action (giving a bit more certainty that it will succeed, a bit like a dry-run)?

(My war story:) I stopped using GHAs after an optimistic attempt to save myself five key strokes ‘r’ ‘s’ ‘p’ ‘e’ ‘c’ led to 40+ commits and seeing the sunrise but still no successful test run via GHA. Headless browsers can be fragile but the cost benefit ratio against using GHA was horrible, at least for an indy dev.

immibis2• 1 year ago

Why would GitHub (a Microsoft service) want you to be less dependent on GitHub? That just makes the extinguishing part harder.

timewizard• 1 year ago

They do.

Your action can be empty and actions generate webhook events.

Do whatever you want with the webhook.

SOLAR_FIELDS• 1 year ago

It’s the allure of the marketplace that gets people. They’re like “oh I could parse my test report files and upload all of them somewhere and render them with a nice output on my pr! I could spend a week writing and testing all of this or I can slap this action here into the YAML and be done with it in 10 minutes.

The trap and tradeoff is that the thirtieth time you’ve done that is when you realize you’ve screwed yourself and the organization by building this Byzantine half baked DAG with a very sketchy security story that you can’t step through, run locally or test

digianarchist2• 1 year ago

Like https://docs.gitlab.com/runner/ ?

mdaniel8• 1 year ago

I'm as big a GitLab fanboy as they come, but they recently axed the gitlab-runner binary's ability to execute local .gitlab-ci.yml files <https://gitlab.com/gitlab-org/gitlab/-/issues/385235>. It now only operates in "receive webhook from the mothership" mode, just like GHA

Pour one out, I guess, but it's okay since I previously was super angry at it for languishing in the uncanny valley of "hello world works, practically nothing else does" -- more or less like nektos/act and its bazillions of forks

immibis2• 1 year ago

Back in the day we called that a shell script. We had this tool called Jenkins that would run the shell script in a new folder every time you pushed a change to gitlab. It was pretty neat.

cadamsdotcom• 1 year ago

Rather than tying CI & deployments to Github Actions, it is usually better to pull as much of it as possible out to shell scripts and call them in containers in GH actions..

There are optimizations you’ll want (caching downloaded dependencies etc); if you wait to make those after your build is CI-agnostic you’ll be less tempted by vendor specific shortcuts.

Usually means more code - but, easier to test locally. Also, swapping providers later will be difficult but not “spin up a team and spend 6 months” level.

Cloudef2• 1 year ago

Nix is in fact perfect for this.

lenova• 1 year ago

As a non-Nix user, could you give me an example?

jiggawatts• 1 year ago

This is always the top comment in these kinds of threads, and I see this as an indication that the current state of CI/CD is pathetically propriety.

It’s like the dark times before free and open source compilers.

When are we going to push back and say enough is enough!?

CI/CD desperately needs something akin to Kubernetes to claw back our control and ability to work locally.

Personally, I’m fed up with pipeline development inner loops that involve a Git commit, push, and waiting around for five minutes with no debugger, no variable inspector, and dumping things to console logs like I’m writing C in the 1980s.

You and I shouldn’t be reinventing these wheels while standing inside the tyre shop.

rsanheim• 1 year ago

We've had open source CI. We still have it. I remember ye olde days of Hudson, before it was renamed Jenkins. Lotsa orgs still use Jenkins all over the place, it just doesn't get much press. It predates GHA, Circle, and many of the popular cloud offerings.

Turns out CI/CD is not an easy problem. I built a short-lived CI product before containers were really much of a thing ...you can guess how well that went.

Also, I'll take _any_ CI solution, closed or open, that tries to be the _opposite_ of the complexity borg that is k8s.

nitwit005• 1 year ago

Having a container makes debugging possible, but it's still generally going to be an unfriendly experience, compared to a script you can just run and debug immediately.

It's inevitable that things will be more difficult to debug once you're using a third party asynchronous tool as part of the flow.

jbmsf• 1 year ago

That's mostly true.

- You may need something to connect the dots between code changes and containers. It's not always possible to build everything on every change, especially in a multi/mono-repo setup.

- You probably need some way to connect container outcomes back to branch protection rules. Again, if you are building everything, every time, it's pretty simple, but less so otherwise.

- You likely want to have some control over the compute capacity on which the actions run, both for speed and cost control. And since caching matters, some compute solutions are better than others.

I don't think GitHub Actions solves any of these problems well, but neither do containers on their own.

exiguus2• 1 year ago

If CI/CD tools were code editors, then Jenkins/JFrog would be like Vi/Vim—powerful and traditional. GitLab CI would resemble Helix or Zed, offering a modern and efficient approach. Meanwhile, GitHub Actions would be akin to VSCode, but with a touch of Dreamweaver CC, blending user-friendly features with comprehensive capabilities.

marenkay• 1 year ago

Have you ever use any of those in a realistic scenario? Any existing CI/CD solution is broken like hell and if you try to do more advanced stuff like reusing templates or actions, all hell breaks lose. Don't get me started on clones via SSH, doing commits from pipelines, etc.

CI/CD is one of the topics that is barely solved or usable ...

exiguus2• 1 year ago

Actually, I have considerable experience setting up and running various CI/CD tools such as Jenkins, GitLab CI, and Travis CI.

In my experience, GitHub Actions work quite well, especially for smaller projects or when you can avoid using public templates and actions. While shortcuts like third-party libraries or actions can be convenient, they often come with trade-offs.

For scenarios where having your own runners and build images is beneficial, I would recommend GitLab CI.

Jenkins is a great choice if you need to run builds on dedicated hardware or within a virtualized environment.

When discussing the challenges of CI/CD, I often notice that many issues stem from complex chains of dependencies within the software or product itself. For example, consider a release pipeline that typically takes six hours to complete but fails after four hours. In such cases, having to restart the entire pipeline instead of just the failed job can be quite inefficient.

Additionally, debugging can become much easier when you have your own build images on runners, as you can run them locally for testing and troubleshooting.

What specific aspects of CI/CD do you find broken or challenging?

OptionOfT4• 1 year ago

I've had the displeasure of working with Macs on which we wrote code that would end up being a docker container. But what is compiled on a Mac is an aarch64 container. What is compiled on an AMD64 Linux machine is amd64.

This is annoying when the code you write is native or reaches out to native stuff. Then all of the sudden your container that builds perfectly on the Mac doesn't build on Linux anymore. (and vice versa, looking at you gcc on debian).

GitHub just (January) got Linux ARM runners, but they're not available for private customers yet.

And their Mac runners do not come with Docker, and it cannot be installed.

realitysballs• 1 year ago

Match dev env to prod env?

OptionOfT4• 1 year ago

No, as their MDM solution only works on Macs.

pxc5• 1 year ago

And their Mac runners do not come with Docker, and it cannot be installed.

?????

If you have a Docker runner on macOS, you're just running a Linux runner in a VM. So just register a Linux runner in a VM, right?

OptionOfT4• 1 year ago

Sorry for the late reply.

GitHub Actions' macOS runners do not come with Docker installed, because of licensing issues: https://github.com/actions/runner-images/issues/17

Then there is the issue that the macOS runners are virtual instances, and pass-through virtualization has not been enabled:

https://github.com/douglascamata/setup-docker-macos-action#:...

cedws4• 1 year ago

I've been using this recently but there's many issues, and things that can only be tested remotely. In some cases I've had to guard steps if: ${{ !env.ACT }} so they don't run locally.

deivid• 1 year ago

I'm using this to run on a risc-v board I have at home, it's pretty nice.

My action just calls `make build test` but it is convenient to have it hooked to GH for automated testing on PRs

CafeRacer• 1 year ago

act is a great helper tool for another tool that is an utter shit.

Ive given up on gh actions a while ago and transitioned to bash scripts in docker containers. I can reproduce stuff locally, can test it, can debug it, etc.

I dont get how GH Actions do not yet have a tool that looks and works like jupyter workbook. Then it would have been fantastic.

sudb2• 1 year ago

I use this for work - but there are edge cases all over the place that I keep running into (e.g. Yarn being installed on Github-hosted runners, but not self-hosted ones or act - https://github.com/actions/setup-node/issues/182)

Apart from that it's been quite good!

Aurornis• 1 year ago

Same experience here. Edge cases everywhere, though most can be worked around.

You can specify different runners to use. The default images are a compromise to keep size down. There is a very large image that tries to include everything you might want. I would suggest trying that if you don’t mind the very large (15GB IIRC) image.

sudb2• 1 year ago

I definitely remember considering the larger images - I think we ended up not using them since my work's usecase for act is running user github workflows on-demand on temporary VMs. The hope was that most usage is covered by the smaller images - and in fairness that has been true so far.

Run GitHub Actions locally

Related Stories