GNU Radio

by tosh • 5 years ago

278 68 5 years ago

ggm• 5 years ago

Has always done a terrible job of selling itself. A $25 dtv receiver and a chickenwire antenna parabola and code your own satellite TV decoder, learn what radar guns emit, emulate a modem... maybe even shift to IR and do TV controls.. it's, latent in this stuff.

But the frontpage doesn't take you there.

szopa• 5 years ago

What are some good resources to start playing with SD add an amateur?

nereye2• 5 years ago

https://pysdr.org/ is a good introduction to DSP/SDR using Python.

Previous discussion on HN: https://news.ycombinator.com/item?id=24750588.

Ham Radio Workbench podcast on GNU Radio: https://www.hamradioworkbench.com/podcast/GNU-Radio.

In terms of hardware, there is a large spectrum, from inexpensive RTL-SDR (receive only, ~$25), PlutoSDR (transmit and receive, $229, which PySDR covers) all the way to $x000+ for USRP etc.

octagons• 5 years ago

Check out the Field Expedient SDR series. They offer a decent introduction for beginners.

Jenda_3• 5 years ago

I would suggest these two as a crashcourse to the math that is used in SDR:

https://www.dsprelated.com/showarticle/192.php https://www.katjaas.nl/home/home.html

We are maintaining a long list with theory/math: https://brmlab.cz/event/dsp#zdroje , and engineering stuff: https://brmlab.cz/project/sdr/start#links . However, I agree it is rather difficult to get into the topic. I'm playing with SDRs for almost 10 years (increasingly "fulltime" lately), and we still need to employ a professional mathematician to help me with some advanced problems.

geenew2• 5 years ago

Is it possible to use a laptop's built-in wifi antenna / wifi card as the hardware side of a gnu radio setup?

That seems like it would be a nice cheap one-two punch for getting started. AFAIR wifi uses the public (unregulated) bands so there should be lots of interesting stuff on those frequencies beyond wifi signals.

RF_Savage3• 5 years ago

Due to it being a radio licenced by rule, the firmware in wifi devices is locked down tight. If it ware wide open FCC would revoke it's type acceptance.

The only project that so far has managed to even partially use wifi hardware as a more generic SDR is nexmon[1] and even that is rather involved. Really cool project but not much heard since 2018.

For just experimenting with modems across a noisy path one could just use the built in microphone and speakers.

1. https://github.com/seemoo-lab/mobisys2018_nexmon_software_de...

lsllc• 5 years ago

You can use a paperclip or a piece of wire if you have access to a GPIO port:

https://www.rtl-sdr.com/receiving-ads-b-jetliner-traffic-wit...

https://www.theverge.com/2019/11/26/20981630/raspberry-pi-pi...

jcrawfordor• 5 years ago

WiFi adapters don't really expose this type of interface. WiFi adapters interact with the host computer by sending and receiving packets, the 802.11 framing and radio de/modulation is performed internally by the adapter. In other words, the host computer sees IP packets, not radio data. Some adapters (or really most adapters) provide some ability for the host to send and receive raw 802.11 frames but it's an infrequently used feature and tends to have a lot of caveats and limitations... you'll see a lot of discussion of this if you read into security/exploitation use-cases for WiFi that involve monitoring or generating 802.11 management traffic.

This is somewhat related to the old difference between a "modem" and a "winmodem": proper telephone modems performed the de/modulation internally, winmodems did not and relied on the host processor to do so, resulting in generally lower performance but a much cheaper device. At modern network data rates it is not really feasible to do this and the general direction is towards offloading more and more of the work to the network adapter, outside of the host's control or view.

For gnuradio you need raw radio samples, often referred to as IQ data due to the nomenclature for amplitude and phase. Few devices that aren't specifically designed for software-defined radio use expose this data because it requires extra complexity in the device and tends to be rather high-bandwidth. The "RTL SDR" TV tuner dongles are so well known precisely because they contain an undocumented feature that allows a host to request raw IQ data, although at a poor sample rate and bandwidth since these devices were not really intended for it.

noasaservice• 5 years ago

Is it possible to use a laptop's built-in wifi antenna / wifi card as the hardware side of a gnu radio setup?

No. There's a LOT of stuff the wifi chip does to convert EM to data, including despreading and other computationally expensive operations.

Using an expensive SDR, you can follow this paper from 2013 to see the block diagram of what decoding wifi looks like:

https://conferences.sigcomm.org/sigcomm/2013/papers/srif/p9....

colechristensen• 5 years ago

It has been done because wifi/bluetooth chipsets are mostly software defined radios but the software is in proprietary pretty well locked down firmware environments. The hardware of the radios will also usually be specified for very specific bands and will have less general purpose uses.

Also note that it’s easy to break FCC regulations and generally be disruptive if you mess around with this stuff and don’t know what you’re doing, and the FCC happily hands out five digit fines.

https://github.com/seemoo-lab/mobisys2018_nexmon_software_de...

pabs32• 5 years ago

There are some cards with open source firmware, you might be able to modify it to do something like that.

https://github.com/chunkeey/carl9170fw/ https://github.com/qca/open-ath9k-htc-firmware http://netweb.ing.unibs.it/~openfwwf/

superkuh2• 5 years ago

Sure. That's because GNU Radio is for making the applications/flowgraphs. It is not an application you "use". It is an application for making applications. Give a newbie even the friendly GUI gnuradio-companion and they're not going to be able to do much without some serious time learning or existing DSP background.

BenjiWiebe2• 5 years ago

Right. There isn't any way of making it easy or beginner friendly, because DSP and RF aren't simple topics.

galangalalgol2• 5 years ago

that $25 dtv receiver only goes up to 2ghz so you can't get satellite tv without building a downconverter which isn't trivial or as cheap. Radar guns are even higher in frequency. It can only receive so you can emulate only the demodulation part of a modem. IR sounds like fun though. You could listen to tire pressure monitors too.

n00p• 5 years ago

an LNB (the thing that goes in the focus of a parabolic antena) is really cheap and easy to power

the probem would be that the cheap dtv (RTL-SDR) only gets up to 2.4MHz of spectrum bandwith, a typical DVB-S mux can be around 20MHz or the DVB-T terrestrial standard, 8MHz

ganzuul• 5 years ago

For a little more investment you can get hacked version with a TCXO and it is able to receive almost 0 to IIRC 28MHz. It is a 2.8MHz spectrum analyzer although energy readings are not a feature.

However cities are terribly noisy environments so loop antennas should work better for most people. Most amateur radio guides assume you are at least a homeowner but that is not realistic among people interested in a 20 eurodollar receiver.

wdfx2• 5 years ago

For about the same cost you can buy an sdrplay rsp clone which can receive from 0-2GHz with 10MHz bandwidth.

brightball• 5 years ago

I am always shocked that radio isn’t core science curriculum in high school at this point.

spacecadet2• 5 years ago

100%

yeetaccount4• 5 years ago

Have you driven around town at noon? That’s when kids were getting out of school pre-pandemic. I just read this morning Kansas is so desperate for substitute teachers that they’ll take on teenagers without a single college credit. The public school system in many parts of the country is basically state funded daycare.

aatharuv• 5 years ago

Any chance this is at least partially deliberate? If more people were to use GNU Radio, the manufacturers of said hardware would get sued until they were forced to lock down their hardware.

syedkarim• 5 years ago

Do you mean manufacturers of RTLSDR devices? Those don’t need to be locked down (in the US), as they are receive-only devices.

erikbye• 5 years ago

Not the github frontpage, no. But the actual homepage points you here: https://www.youtube.com/playlist?list=PLbBQHMnVMR41zZUZGF0bJ...

masto• 5 years ago

I'm reasonably good at computers, and I even have a small understanding of electronics and radio, but I bought a HackRF One about 6 years ago, and every time I try to use this stuff I get hopelessly lost. Most of the time I can't even get the software running, or figure out which software I need to get running, and when I do I'm hopelessly lost. The only thing I ever managed was to listen to an FM radio station with a program that simplified the interface down to a frequency slider.

I would love to do things like investigate how my water meter broadcasts its readings, but "latent" doesn't even begin to cover how inaccessible this stuff is. There are "tutorials", but they just say "Stick these parts together. There, now you have stuck these parts together!" (https://wiki.gnuradio.org/index.php/Simulation_example:_Narr...)

I know, open source, I should learn everything and then write better documentation.

MrQuincle• 5 years ago

I reverse engineered a so called social alarm a bit ago. You can find it here: https://github.com/mrquincle/social_alarm

Gnuradio was also new to me. However with two HackRFs I could do the entire thing. First replay attacks. Then trying to get the code by building up a set of processing blocks. Last synthesis of the complete signal.

Very nice to do! Felt great!

jancsika• 5 years ago

You should consider this a real treat-- it's like you're getting to travel back to the 90s open source scene for free.

-Tom Sawyer

mikewarot2• 5 years ago

Have they fixed the incredible loss of features from the WX GUI yet, the QT widgets just didn't have anywhere near the same functionality last time I looked?

[Edit]The WX versions of FFT and Oscilloscopes were far, FAR better than their QT replacements.

minimilian• 5 years ago

You're probably talking about something else, but it took me a while to realize that many features are hidden behind a right (or is it middle) click.

beaugunderson• 5 years ago

This is a big deal when running on e.g. a MacBook that has no middle click--it is very worthwhile to use software that emulates a middle click when a modifier key is held down to gain back this functionality.

sh4un• 5 years ago

Weird. Was looking at this program yesterday and the website was all over the place.

wildzzz• 5 years ago

There's a similar SDR toolkit out there called RedHawk. Its open source but heavily funded by the NSA so you can imagine that it has specific SIGINT applications in mind. However, you can still connect it to an RTL-SDR and play around with the components in a similar manner.

https://github.com/RedhawkSDR/redhawk

idealmedtech2• 5 years ago

Our satellite team in college used GNURadio to modulate and demodulate our radio signals, and to automate the entire pass (in conjunction with our mission operations team). I remember at that time (2016-2018), there was an absolute dearth of information on something as simple as demodulating GMSK, much less OQPSK. The given blocks for these modulation types never worked, so we had to build out custom blocks in C++ to have a chance at interacting with an actual spacecraft in flight (with all the goodies like active Doppler compensation etc)

CapricornNoble• 5 years ago

I did my masters thesis with GNURadio 2013-2016 (a frequency-hopping implementation). I often thought my struggles were 100% my own incompetence, but eventually realized it was possibly 50% buggy GNURadio blocks. So much potential in SDRs but damn was this software an opaque mess to use.

idealmedtech2• 5 years ago

There was a time where I could point to specific implementations in GNURadios source that were very buggy (lots of uninitialized memory assumed to be zeroed), but alas, it's been lost from my memory.

vkoskiv• 5 years ago

This reminds me of a fun story. A few years ago at a cool lan + demoparty event called Instanssi they had a local FM radio station dedicated to the event. It was then revealed that hidden in that FM transmission was the private key to a litecoin wallet containing some coin. I set about to try and extract the hidden message, but didn't succeed before someone else armed with GNU radio had already decoded the SSTV image from the sideband broadcast. It was a fun challenge, and the person who won taught me a bit about GNU Radio. An amazing piece of software, and a fun memory!

oolonthegreat• 5 years ago

I especially appreciate the "Simulink-like" block based visual coding style, I think it's a more intuitive alternative than textual coding in the context of systems and blocks etc.

also love the convenience of simply "adding a slider" whereas in matlab for example you have to build an "app" and add callback functions and do weird stuff to change the block parameters

cebert• 5 years ago

SDR and GNU radio has always sounded interesting to me ever since I heard it mentioned on the Security Now podcast years ago. Does anyone know of good resources on how to get started? This is something I’d love to tinker with one day. I also don’t know a great deal about RF communication in general.

ericbarrett• 5 years ago

I looked into this last year, and the process seems to be "get at least half an undergrad degree in signal processing and then read the code." GNU Radio is really powerful, but most of the tutorials out there are "rest of the fucking owl" style[0]. Which I then realized makes sense, given the complexity of the domain. So be aware it's a deep subject and you won't be decoding new satellites in a few clicks unless you're copying somebody else's homework.

[0] https://knowyourmeme.com/memes/how-to-draw-an-owl

weberer• 5 years ago

This wiki page is pretty good for getting started.

https://wiki.installgentoo.com/wiki/Software-defined_radio

pajko2• 5 years ago

Buy a dongle and antenna from here: https://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/

Install GNURadio, start playing with gqrx and FM reception.

Buy a cheap radio controlled thingy, install SDR# with the plugins package and RTL_433 plugin for it and start playing.

wavewalkerdsp• 5 years ago

I've put together new introductory tutorials here: https://wiki.gnuradio.org/index.php/NewTutorialReview

Using a virtual machine with Ubuntu 21.04 and installing using the PPA is a good way to test it out: https://wiki.gnuradio.org/index.php/InstallingGR#Ubuntu_PPA_...

More background information on the tutorials, future plans, etc. https://www.wavewalkerdsp.com/2022/01/13/gnu-radio-tutorials...

ngcc_hk• 5 years ago

Got some fortran (0.3%) there?

RF_Savage3• 5 years ago

I just wish GNU Radio did not brake compability between versions.

3.6 --> 3.7 --> 3.8 all ware breaking.

So no older example or block you find will work in the current version. This is infuriating when trying to learn and following tutorials. All my friends seem to have migrated to building their prototypes in C using something like liquid-dsp instead of gnuradio. As that will compile and work next year.

superkuh2• 5 years ago

It is frustrating. What I do is keep computers from a given time era in their natural state of software. So now I have a physical computer for running GR 3.6 stuff, one for 3.7 stuff, and soon I'll have one for 3.8 stuff. Trying to constantly upgrade and getting rid of old installs is counterproductive.

This applies in general to all software. It's really nice to have old OSes use applications that can't run on newer distros.

pajko2• 5 years ago

Usually there's little documentation about SDR, but Analog Devices has "recently" released a book, which is available for free: https://www.analog.com/en/education/education-library/softwa...

Also can be bought, but has a quite hefty price tag: https://www.amazon.com/Software-Defined-Radio-Engineers-Trav...

Other good resources are the books and courses on WirelessPi: https://wirelesspi.com/book/

teleforce• 5 years ago

This is an excellent book on learning DSP for modern wireless communications and it should get you over the fundamentals [1].

There is an interesting project for open source LoRa physical layer implementation in GNU Radio. The authors had to reverse engineer the LoRa physical layer for the implementation because it is proprietary unlike the data link layer LoRaWAN part of it [2].

[1]Digital Signal Processing in Modern Communication Systems:

https://www.amazon.com/Digital-Signal-Processing-Communicati...

[2]LoRa PHY based on GNU Radio:

https://www.epfl.ch/labs/tcl/resources-and-sw/lora-phy/

doom2• 5 years ago

Does GNU Radio have any utility for amateur radio operators? For example, tx/rx of FT8 or PSK31 (or any other digital modes)?

BenjiWiebe2• 5 years ago

Yes, but why not use the existing software? Building flowgraphs in GNU Radio is not simple.

dang• 5 years ago

Some past threads:

FM Reception with the GNU Radio Companion - https://news.ycombinator.com/item?id=25976599 - Jan 2021 (18 comments)

GNU Radio 3.9 - https://news.ycombinator.com/item?id=25823359 - Jan 2021 (53 comments)

Software Defined Radios with GNU Radio Companion - https://news.ycombinator.com/item?id=24208497 - Aug 2020 (1 comment)

Decoding radio telemetry heard on news helicopter video footage with GNU Radio - https://news.ycombinator.com/item?id=23417891 - June 2020 (36 comments)

An Implementation of Tempest in GNU Radio - https://news.ycombinator.com/item?id=23151880 - May 2020 (35 comments)

GNU Radio first steps: a FM receiver - https://news.ycombinator.com/item?id=21613988 - Nov 2019 (38 comments)

GNU Radio 3.8 - https://news.ycombinator.com/item?id=20681316 - Aug 2019 (67 comments)

Shinysdr – Software-defined radio receiver application built on GNU Radio - https://news.ycombinator.com/item?id=14170516 - April 2017 (19 comments)

A Peek at GNU Radio’s Buffer Architecture - https://news.ycombinator.com/item?id=13406505 - Jan 2017 (15 comments)

Digital Video Transmission using LimeSDR and GNU Radio - https://news.ycombinator.com/item?id=11856912 - June 2016 (8 comments)

Public safety radio systems decoding with GNU-radio OP25 project - https://news.ycombinator.com/item?id=11696507 - May 2016 (1 comment)

GNU Radio Tools for Radio Wrangling and Spectrum Domination [video] - https://news.ycombinator.com/item?id=10843175 - Jan 2016 (22 comments)

Taking control of a 36 year old NASA spacecraft using GNU radio - https://news.ycombinator.com/item?id=9476853 - May 2015 (7 comments)

Taking the Raspberry Pi 2 for a Test Drive with GNU Radio - https://news.ycombinator.com/item?id=9420427 - April 2015 (46 comments)

How to talk to a 36-year-old space probe with GNU Radio, a USRP and a big dish - https://news.ycombinator.com/item?id=8028773 - July 2014 (18 comments)

Exciting developments in GNU Radio - https://news.ycombinator.com/item?id=2279758 - March 2011 (2 comments)

GNU Radio - create your own software-defined radio device - https://news.ycombinator.com/item?id=622035 - May 2009 (6 comments)

mikewarot2• 5 years ago

If you want to learn DSP, GNU Radio is the way to go. It has audio sources and sinks, so you can try out things and hear / see (using the scope sink) the results in real time.

It was really interesting to play with negative frequencies and get a better handle on it than the math alone would have ever given me.

punnerud• 5 years ago

Could GNU Radio work as a Python alternative to NodeRED? (Node.js/JavaScript)

nereye2• 5 years ago

A more generic equivalent seems to be PyFlow: https://wonderworks-software.github.io/PyFlow/.

GNU Radio is targeted to a specific domain and the collection of existing nodes reflects that, similar tools exist for other domains, e.g. for CAD there is Sverchok which works with Blender: https://nortikin.github.io/sverchok/.

spacecadet2• 5 years ago

I love gnuradio, been messing around with it on raspberry pi for some time. Making antennas from scrap is particularly fun.

GNU Radio

Related Stories