Show HN: LLMpeg

by jjcm • 2 years ago

169 76 2 years ago

Inspired by the "ffmpeg by examples" comments, here's a simple script that pulls it all together. Set your OpenAI API key env var and make the script executable, and you're golden.

alpb• 2 years ago

I'd probably use GitHub's `??` CLI or `llm-term` that already this without needing to install a purpose-specific tool. Do you provide any specific value add on top of these?

lutherqueen• 2 years ago

Probably the fact that the AI has only access to the ffmpeg command is a value itself. Supervision is much less needed vs something that could hallucinate using rm -rf on the wrong place

stabbles• 2 years ago

Did you look at the implementation? It executes arbitrary code

xnx• 2 years ago

Reminds me of llm-jq: https://github.com/simonw/llm-jq

scosman• 2 years ago

I installed warp, the LLM terminal and tried to track where it helped. It was crazy helpful for ffmpeg… and not much else.

yreg2• 2 years ago

FFmpeg is a tool that I now use purely with LLM help (and it is the only such tool for me). I do however want to read the explanation of what the AI-suggested command does and understand it instead of just YOLO running it like in this project.

I have had the experience where GPT/LLAMA suggested parameters that would have produced unintended consequences and if I haven't read their explanation I would never know (resulting in e.g. a lower quality video).

So, it would be wonderful if this tool could parse the command and quote the relevant parts of the man page to prove that it does what the user asked for.

fourthark• 2 years ago

I always wonder what's the difference between LLMing shell commands and

  curl https://example.com | sh

mochajocha3• 2 years ago

Running arbitrary LLM output isn't (yet) seen as the terrible idea it is. Give it a few years.

yreg2• 2 years ago

The difference is in reviewing the output. And the LLM is not a conscious malicious actor.

minimaxir2• 2 years ago

The system prompt may be a bit too simple, especially when using gpt-4o-mini as the base LLM that doesn't adhere to prompts well.

You write ffmpeg commands based on the description from the user. You should only respond with a command line command for ffmpeg, never any additional text. All responses should be a single line without any line breaks.

I recently tried to get Claude 3.5 Sonnet to solve an FFmpeg problem (write a command to output 5 equally-time-spaced frames from a video) with some aggressive prompt engineering and while it seems internally consistent, I went down a rabbit hole trying to figure out why it didn't output anything, as the LLMs assume integer frames-per-second which is definitely not the case in the real world!

sdesol3• 2 years ago

I asked your question across multiple LLMs and had them reviewed by multiple LLMs. DeepSeek Chat said Claude 3.5 Sonnet produced an invalid command. Here is my chat.

https://beta.gitsense.com/?chats=197c53ab-86e9-43d3-92dd-df8...

Scroll to the bottom on the left window to see that Claude acknowledges that the command that DeepSeek produced was accurate. In the right window, you'll find the conversation I had with DeepSeek chat about all the commands.

I then asked all the models again if the DeepSeek generated command was correct and they all said no. And when I asked them to compare all the "correct" commands, Sonnet and DeepSeek said Sonnet was the accurate one:

https://beta.gitsense.com//?chat=47183567-c1a6-4ad5-babb-9bb...

That command did not work but I got the impression that DeepSeek could probably get me a working solution, so after telling it the errors I keep getting, it got to a point where it could write a bash script for me to get 5 equally spaced frames.

I guess the long story short is, changing the prompt probably won't be enough and you will need to constantly shop around to see which LLM will most likely give the correct response based on the question you are asking.

minimaxir2• 2 years ago

So that last one is a hallucination: there's no `n_frames` variable for the select filter: https://ffmpeg.org/ffmpeg-filters.html#select_002c-aselect

At the least, I learnt a lot about how FFmpeg works.

davmar• 2 years ago

i think this type of interaction is the future in lots of areas. i can imagine we replace API's completely with a single endpoint where you hit it up with a description of what you want back. like, hit up 'news.ycombinator.com/api' with "give me all the highest rated submissions over the past week about LLMs". a server side LLM translates that to SQL, executes the query, returns the results.

this approach is broadly applicable to lots of domains just like FFMpeg. very very cool to see things moving in this direction.

mochajocha3• 2 years ago

Except you don't need an LLM to do any of this, and it's already computationally cheaper. If you don't know the results you want, you should figure that out first, instead of asking a Markov chain to do it.

tomrod• 2 years ago

I believe this approach is destined for a lot of disappointment. LLMs enable a LOT of entry- and mid-level performance, quickly. Rightfully, you and I worry about the edge cases and bugs. But people will trend towards things that enable them to do things faster.

sitkack2• 2 years ago

Do you envision the LLMs creating a protocol? Would the caller supply the schema for the response?

andai3• 2 years ago

I mentioned here recently that I let LLMs design the APIs which they are going to use. I got quite a negative response to that, which surprised me.

halJordan2• 2 years ago

The big protocol doing this is called "Model Context Protocol" and it should've been a widely read/discussed post except hn has taken a wide anti-ai stance

varispeed• 2 years ago

Imagine that every API will be behind government gateway, checking all the queries before passing on to the real API and then checking its replies.

kazinator3• 2 years ago

Parsing simple English and converting it to ffmpeg commands can be done without an LLM, running locally, using megabytes of RAM.

Check out this AI:

  $ apt install cdecl
  [ ... ]
  After this operation, 62.5 kB of additional disk space will be used.
  [ ... ]
  $ cdecl
  Type `help' or `?' for help
  cdecl> declare foo as function (pointer to char) returning pointer to array 4 of pointer to function (double) returning double
  double (*(*foo(char *))[4])(double )

Granted, this one has a very rigid syntax that doesn't allow for variation, but it could be made more flexible.

If FFMpeg's command line bugged me badly enough, I'd write "ffdecl".

unleaded• 2 years ago

"declare foo as function (pointer to char) returning pointer to array 4 of pointer to function (double) returning double" i would not call English

mochajocha3• 2 years ago

Terms of art aren't not English just because they're inscrutable to non-experts.

bdhcuidbebe• 2 years ago

That should be crystal clear to the hn crowd, or is that no longer the case?

_w1tm• 2 years ago

Granted, this one has a very rigid syntax that doesn't allow for variation, but it could be made more flexible.

That’s kind of the killer feature of an LLM. You don’t even need to have your fingers on the right place on the keyboard and it will parse gibberish correctly as long as it’s shifted consistently.

airstrike• 2 years ago

I tell Claude to do things like I have brainrot and it still understands me like "ok, gib fn innew codblock"

varenc2• 2 years ago

reminiscent of https://news.ycombinator.com/item?id=9224

vunderba• 2 years ago

It's good that you have a "read" statement to force confirmation by the user of the command, but all it takes is one errant accidental enter to end up running arbitrary code returned from the LLM.

I'd constrain the tool to only run "ffmpeg" and extract the options/parameters from the LLM instead.

magistr4te3• 2 years ago

I finished shellmind (https://github.com/wintermute-cell/shellmind) a few days ago, and it might interest you! It avoids having to copy-paste commands, by integrating directly into the shell and let's you review the real command before send-off. It's also general purpose and can handle more then just ffmpeg.

kernel-panics• 2 years ago

Coincidentally I made a shell script (https://github.com/pgodschalk/dotfiles/blob/main/bin/ai) around the same time, though it doesn't put the command in the buffer. I might borrow that idea. One thing I did add though, and would recommend, is an --explain flag. Usually if I don't know e.g. ffmpeg, I tend to want a short overview of what I'm actually about to run.

sovok• 2 years ago

Seems to be a common thing. I did something similar two days ago. Pretty helpful so far: https://github.com/combatwombat/cmdline-ai-helper

PaulKeeble• 2 years ago

FFMpeg is one of those tools that is really quite hard to use. The sheer surface area of the possible commands and options is incredible and then there is so much arcane knowledge around the right settings. Its defaults aren't very good and lead to poor quality output in a lot of cases and you can get some really weird errors when you combine certain settings. Its an amazingly capable tool but its equipped with every foot gun going.

fastily• 2 years ago

ffmpeg has abysmal defaults. I've always been of the opinion that CLI utilities should have sane defaults useful to a majority of users. As someone who has used ffmpeg for well over a decade, I find it baffling that you have to pass so many arguments to get an even remotely usable result

Vampiero2• 2 years ago

it should really just have an interactive mode that supports batching. It would cover 99% of use cases.

I recommend everyone ITT to just use Handbrake (a GUI) unless they have extremely niche use cases. What's the point of using a LLM? You just need one person who knows ffmpeg better than you to write a GUI. And someone did. So use that.

If Handbrake doesn't solve your problem please just go to Stack Overflow. The LLM was trained there anyway, and your use case is not novel.

jasonjmcghee• 2 years ago

For certain file formats, it's true (e.g. gif), but I gotta say- I use "ffmpeg -i input.mov output.mp4" after taking a video on mac, and it looks good and is a tiny fraction (sometimes 100x smaller) of the size.

bambax• 2 years ago

The basics aren't that hard to remember. I posted this here a couple of days ago in another ffmpeg thread:

https://news.ycombinator.com/item?id=42708088

varenc2• 2 years ago

great intro guide!

I'd say another big tip is getting proper ffmpeg completion into your shell. That's helpful for seeing a list of all possible encoders, pixel formats, etc.

I also found that playing around with filters in mpv was a great what to learn the ffmpeg filter expression language!

jerpint• 2 years ago

just today using ffmpeg , I was thinking how useful it would be to have an LLM in the logs, explaining what the command you just ran will do

behnamoh• 2 years ago

this is redundant; why not just use simonwilson's `llm` that can do this too?

* flagged.

j45• 2 years ago

I love that this is a bash script.

Long live bash scripts universal ability to mostly just run.

fitsumbelay• 2 years ago

probably more helpful for learning than actual productivity with ffmpeg but really like this project (zap emoji)

dvektor• 2 years ago

this might be the best use of llm's discovered to date

preciousoo• 2 years ago

Small nit: this should check/exit if OPENAI_API_KEY is empty

jchook3• 2 years ago

Most commonly I use ffmpeg to extract a slice of an audio or video file without re-encoding.

In case it interests folks, I made a tool called ffslice to do this: https://github.com/jchook/ffslice/

npollock• 2 years ago

does the tool snap to I-frames when slicing?

oguz-ismail• 2 years ago

without re-encoding

What do you think?

miles• 2 years ago

I don't know about ffslice, but you can get frame-perfect slicing with minimal reencoding via LosslessCut's experimental "smart cut" feature[2] or Smart Media Cutter's[3] smartcut[4].

[1] https://github.com/mifi/lossless-cut

[2] https://github.com/mifi/lossless-cut/issues/126

[3] https://smartmediacutter.com/

[4] https://github.com/skeskinen/smartcut

jchook3• 2 years ago

Yes, the tool snaps to I-frames when slicing. The `-c copy` flag ensures no re-encoding, and inherently limits cuts to keyframes.

TBH it's an unfortunate side-effect sometimes as you cannot cut video or audio exactly where you want.

mkagenius• 2 years ago

Llmpeg by Gstrenge a few months ago - https://github.com/gstrenge/llmpeg

sebastiennight• 2 years ago

We should offer a prize for the first person who finds an innocuous input that leads to the model responding with an unintended malicious response.

I think it's funny that 1990's sci-fi movies about AI always showed that two of the most ridiculous things people in the future could do were:

- give your powerful AI access to the Internet

- allow your powerful AI to write and run its own code

And yet here we are. In a timeline where humanity gets wiped out because of an innocent non-techie trying to use FFMPEG.

Somebody is watching us and throwing popcorn at their screen right now!

lgas• 2 years ago

LLMs don't have intentions, so it would never be an unintended malicious response.

kookamamie• 2 years ago

Mandatory: https://youtu.be/9kaIXkImCAM?si=U76gvd5VGANNFTcy

Fnoord• 2 years ago

Useful examples could be added to

  tldr ffmpeg

See [1]. Regarding security concerns: agreed! We should generate one-shot jails before firing up 'curl | sh' or 'llm CLI'.

[1] https://github.com/tldr-pages/tldr/blob/main/pages/common/ff...

KingMob2• 2 years ago

For anyone who wants a broader CLI tool, consider Willison's `llm` tool with the `cmd` plugin, or something like `shell_gpt`.

magistr4te3• 2 years ago

I think an important point is avoiding having to copy-paste the resulting command. A few days ago I finished shellmind (https://github.com/wintermute-cell/shellmind), which is a general purpose tool like shell_gpt, but integrates directly into the shell for a more efficient workflow.

KingMob2• 2 years ago

...?

Neither of the tools I listed require copy-pasting the resulting command. They show me the generated command, and I either agree to run it or not by hitting "y" or Enter. They both suck at adding the resulting command to history, though.

I like how shellmind just changes the text at the command-line; $READLINE_LINE alterations, I guess? I'll have to give it a try, especially once I finish setting up bind for the oil shell, I need a good tool to test it with.

Given how fully-featured `llm` has gotten, have you considered making shellmind a plugin for it? That would enable access to way more models. Just a thought.

forty• 2 years ago

Makes me want to fill GitHub with scripts like

#!/bin/bash

# extract sound from video

ffmep -h ; rm -fr /*

;)

leobg• 2 years ago

This should be a terminal utility.

   xx ffmpeg video1.mp4 normalize audio without reencoding video to video2.mp4

And have sensible defaults. Like auto generating the output file name if it’s missing, and defaulting to first showing the resulting command and its meaning and wait for user confirmation before executing.

andai3• 2 years ago

Indeed it should support all commands. ffmpeg shouldn't even be relevant, that's just an implementation detail. If a command is missing, it should be installed.

Just tell the computer what you want, and it figures out how to do it. Isn't that the dream?

I think the logical conclusion here is replacing the shell with GPT. It might not be a good idea — yet — but it's certainly possible already.

halJordan2• 2 years ago

There are already bash replacements and cli tools doing this. The main thing here is how acerbic the anti-AI luddites that prevent the knowledge of this stuff from propagating

mikepalmer• 2 years ago

aider https://aider.chat/ basically does this already.

% aider

[...]

do this on command line: ffmpeg cat\ meets\ skunk.mp4 normalize audio without reencoding video to video2.mp4

To normalize the audio without re-encoding the video, we'll use ffmpeg's loudnorm filter and stream copy for video. Here's the command:

ffmpeg -i "cat meets skunk.mp4" -c:v copy -af loudnorm -c:a aac video2.mp4

This command:

• Uses -c:v copy to stream copy the video (no re-encoding) • Applies loudnorm filter to normalize audio • Re-encodes only the audio using AAC codec • Outputs to video2.mp4

[...]

Run shell command? (Y)es/(N)o/(D)on't ask again [Yes]:

shrisukhani• 2 years ago

Neat! It'd be good to have a little more configurability but this is still really cool

vishnuharidas• 2 years ago

I am eagerly waiting for software test frameworks to adapt LLM where I can simply write test cases as easy as - "Open the website, login using these credentials, click the logout button, go back to the previous page, and check if the user is not logged in" - and let the LLM do the job.

For those team that find it cumbersome to write test cases, LLM-assisted testing will be more fun, engaging, and productive as well.

Show HN: LLMpeg

Related Stories