Zettlr: Note-Taking and Publishing with Markdown

by signa11 • 2 years ago

133 81 2 years ago

Out of curiosity: Is there a way to interact with Zettlr data using command line tools? Like searching notes, editing notes with neovim/emacs etc?

Trying to understand the extend of "lock-in" to Zettlr.

jen729w• 2 years ago

Looks like it’s just files on disk, so you can do whatever you like.

https://docs.zettlr.com/en/core/files/

thenegation2• 2 years ago

Thanks a ton!

gnabgib• 2 years ago

Discussion 1 month ago (129 points, 24 comments) https://news.ycombinator.com/item?id=41023319

Big in 2020 (675 points, 262 comments) https://news.ycombinator.com/item?id=23723775

dSebastien3• 2 years ago

I haven't tried Zettlr, so I can't compare, and I'm not here to criticize, but what I miss in many tools in this Market is the ability to install and create extensions. That's why I'm a huge fan of Obsidian [0].

I publish my notes [1] using Obsidian Publish [2], and find the experience really good. I'm able to customize almost every aspect I need to.

There's also Quartz [3] that is a good compatible alternative to Obsidian Publish.

[0] https://notes.dsebastien.net/30+Areas/33+Permanent+notes/33....

[1] https://notes.dsebastien.net/

[2] https://obsidian.md/publish

[3] https://quartz.jzhao.xyz/

dleeftink• 2 years ago

I also enjoy a similar workflow, but am increasingly running into the editor experience being a little janky: list items jump around when wrapping onto a new line, live mode not being truly wysiwyg, pdf styling being different from the reading view, etc.

This can all be worked around, but it makes for a less polished editing experience than some other offerings. We're also at a point where some major plugin functionality should rather be part of the main app, as it's becoming exceedingly difficult to maintain plugin CSS styles and async functionality without interfering with other plugins.

That said, I'm still a fan.

Brajeshwar2• 2 years ago

The way I do these days, is to have a minimal setting with the minimal plugins. Now, have that working `.obsidian` folder as a backup or a Starter Kit. Whenever Obsidian starts acting up, it is likely that I have a new plugin or there are too many; I just remove and get back my working Starter Kit `.obsidian` and I'm as fresh as New. Also, try not to have many non-text (or Markdown) files as much as possible in the Vaults.

ternaryoperator• 2 years ago

I'm able to customize almost every aspect I need to.

Are you, though? I've not seen a single site that I know to be published with Obsidian Publish that does not have the content graph. And when I checked out Publish, I found no way to get rid of it and use that real estate for content of greater value to the reader. Has that changed?

jeffhuys• 2 years ago

I believe there was some custom CSS extension? If so, just add `.graph-view-outer { display: none; }` or similar.

rkangel• 2 years ago

Huh, I hadn't even noticed that the content graph was in the corner of every Obsidian docs page. That's a bit pointless.

dSebastien3• 2 years ago

There are settings, but at the end of the day it's just html/css/js. The publish site is not the easiest to customize, but it's possible.

We can create a js and css file.

I didn't need/want to change much, but I know I could. I just added tags, creation and update times, my newsletter form, plausible analytics etc.

One feature I lack is the ability to define canonical links..

sshine• 2 years ago

I've used Obsidian for a couple of years, mostly for private to-do things

I used iCloud to sync between phone and laptop.

It worked great until recently.

Now I experience extreme jankiness: App sometimes takes forever to load, files missing, or suddenly disappearing as I open them. The problem, as far as I can read, is iCloud aggressively removing files locally when they're not used. I haven't tried Obsidian Sync yet.

Brajeshwar2• 2 years ago

Try with Dropbox (if you are using it) and set that folder (Vault) to sync offline. I use iCloud mostly to sync the computer settings, share amongst family members, but not for something which I need access locally such as the Obsidian/Markdown files. It works so far. I have over 5 or more Vaults (folders) managed by Obsidian via Dropbox.

dSebastien3• 2 years ago

There's a setting to debug the starting time. It's interesting to find out the culprit (often a specific plugin)

compacct27• 2 years ago

Obsidian Sync is great, was worried you were describing it for a sec there

jonnybgood• 2 years ago

If you are on a Mac, you have to disable in sys prefs iCloud “Optimize Mac Storage”.

Your files should no longer be removed.

elric2• 2 years ago

I was a heavy Zettlr user for a few years, but I've since switched to Obsidian and haven't looked back. The extensibility is great, the editor feels snappier, and it's an overall better editing experience. Especially when you install plugins like Excalidraw for adding drawings straight from within the tool.

schaefer• 2 years ago

What references and/or examples do you recall being the most useful as you transitioned form Obsidian User to Obsidian Plug-in Author?

I have some really basic html pages and cgi scripts I'd like to port in as a plug-in, but haven't sat down with it yet.

davidcollantes• 2 years ago

Wow, Quartz looks really good. Thank you for sharing!

marklyon• 2 years ago

Are you really pimping your 70 EUR Obsidian "starter kit" in a comment? WTAF?

zareith• 2 years ago

Zettlr is quite nice. The UI has a few quirks and sometimes does not follow conventions set by other applications, but the wysiwyg interface for markdown offers a great editing experience. And because it is all just markdown files in local disk there is no vendor lockin.

I am not the primary intended audience, but I wrote my last sci-fi novel (The Grandmaster's Gamble) entirely using Zettlr and pandoc. The built-in languagetool integration was a big help.

emrah3• 2 years ago

Hot take: Markdown was nice back in the day when in-browser editors sucked for the most part and we just wanted to get things done and didn't mind the little bit of noise it adds to content. It was an act of satisfysing.

In 2024 though, there is no need to have to deal with markdown. There are decent editors that are far nicer to use which support rich text without the need to see past the markdown noise. Any company serious enough with their app should invest in creating/using a rich text editor

Kichererbsen• 2 years ago

Except a lot of people (like myself) really dislike rich text as a format. Doesn't really play nicely with git. When was the last time you wrote rich text by hand?

emrah3• 2 years ago

Yes i suspect as much, especially on here but it is a biased sample here :-)

jillesvangurp• 2 years ago

Depends. Most developers tend to prefer markup over rich editors. Any application aimed at developers should probably be markdown first.

kilolima2• 2 years ago

Do you have use the mouse to use rich text? If so then no thanks.

burrish• 2 years ago

Well most rich-text have the common shortcuts tho, like ctrl + b to put text in bold.

burmanm• 2 years ago

We've even had word processors for over 40 years, why would we suddenly need mouse support to write rich text?

Editing rich text without mouse has always been a thing, Markdown isn't something that suddenly created some fancy new rich text without mouse experience.

emrah3• 2 years ago

Yep i use the mouse and I'm very fast with it. I bet I'm faster with it than you are with your keyboard ;-)

innocenat2• 2 years ago

You called it "markdown noise". I called it "easy to see if I actually bolded the whole word or I forgot to bold the last character" or "easy to see if I also underlined the space after the word".

microflash• 2 years ago

In 2024, markdown gives me interoperability between different applications and editors. The interop between rich text editors is not so good.

slightwinder2• 2 years ago

Is there even real interoperability outside the basic syntax? There are so many flavors of Markdown with different extensions and probably incompatibilities...

dspillett• 2 years ago

Hot take: Markdown was nice back in the day when in-browser editors sucked

I don't think markdown came from that at all. It gets used that way a lot, but the point for me (and IIRC the point of it from the start) is that the format is just plain text that can be up-sampled to something a bit prettier where desired. It can be edited by hand, it can be understood by eye in its pure form, it isn't as verbose as other text-only options¹ meaning it doesn't distract from the content as much², it can be edited/viewed anywhere plain text can, etc.

It wasn't intended for web-based editors, web-based editors just started using it because it was preferable to them than other options at the time (HTML, BBCode, …).

--------

[1] including HTML and anything XML based

[2] yes, this makes it less expressive than other options³, but that is often a compromise worth making

[3] I'm thinking of looking at AsciiDoc, which predates MD and for the basics is very similar but supports much more, for my own scrawlings (nothing currently published), but TBH once I get beyond basic MD I'll probably want to be more opinionated (and disagree with existing opinions!) so will likely end up making my own MarkDown+ and tool to pretty it up.

refset3• 2 years ago

The motivations behind the project are quite interesting and well argued: "Developing Open Source is a Political Act"

https://www.zettlr.com/post/release-developing-open-source-p...

poszlem• 2 years ago

Not that interesting of a take, especially coming for a political scientist (which the author is).

"When all you've got is a hammer, everything starts looking like a nail."

Feels like it's straight out of that "everything is political" phase we are hopefully leaving behind, usually meaning - "I will try to problematise it to make it political".

refset3• 2 years ago

I actually don't think the headline captures the point succinctly, because the definition of 'political' being used is obscure and quite specific:

"Political activity is whatever shifts a body from the place assigned to it or changes a place's destination." (Rancière 1999, S. 30)
What Rancière means by that is that politics occurs whenever a thing is not in its assigned place. This is perfectly valid for software: As soon as a person diverts from what is expected from them, software aborts with an error or "corrects" the "wrong" statement automatically. So at least from the view of Jacques Rancière, software is utterly political. It has a significant impact on our daily lives and we cannot do anything against this. And this is a problem that especially corporate software shows.

majoe• 2 years ago

I've been using Zettlr for some time. Here are some things I like about it:

- Latex support - Your notes are just plain text files and you can easily sync them with nextcloud or syncthing - Linking of notes by an id for using them in a zettelkasten - You can use your citation library from Zotero to add citations to your notes

What I don't like is that the performance is quite bad, especially when there are many equations in a note.

I also had no good experience, when trying to publish presentations, I'm now using Quarto in vscode for that.

All in all I think it is a really good tool for scientific note taking or as a Zettelkasten, although I'm using it less these days since I quit my PhD.

samuell• 2 years ago

What I don't like is that the performance is quite bad, especially when there are many equations in a note.

Installed it now on Linux Mint 21.1. Takes a full 13 seconds to just start(!)

Otherwise, looks quite pretty.

rubymamis5• 2 years ago

You might want to try my Qt C++ app[1], which is very performant, has a block-based editor, and simple to use. Currently, no Latext support, but it's in the bucket list.

[1] https://get-plume.com/

efilife• 2 years ago

Paid. You can't add images to documents unless you pay, is this correct?

vitorsr• 2 years ago

Why not offer a one-time purchase option?

swah4• 2 years ago

Looks great, and reminds me a lof of the Bear app. What are the main differences?

coldblues• 2 years ago

I would recommend https://logseq.com/

As an outliner, and being block-based, I think it's more suitable for Zettelkasten and generally atomic notes.

Progress on the `master` branch is a bit slow because there's a transition towards using a database instead of the filesystem https://github.com/logseq/logseq/tree/feat/db

https://discuss.logseq.com/t/why-the-database-version-and-ho...

mikae1• 2 years ago

there's a transition towards using a database instead of the filesystem

Looks like it won't transition away from using the filesystem though:

[…] we’ll continue to support both file-based and database-based graphs, with a long-term goal of achieving seamless two-way sync between the database and markdown files. This will allow you to leverage the benefits of the database version while still being able to use other tools.[1]

[1] https://discuss.logseq.com/t/why-the-database-version-and-ho...

innocenat2• 2 years ago

I used logseq for about a year and I so hate the block-based editor (the same reason I stopped using Notion). I went back to using flat-file for a while until I find Zettlr.

bachmeier2• 2 years ago

An important warning. Logseq is very nice for some things...until it loses your data. You know you put something into Logseq, but it's not there, so you question if you're losing your mind. That's one reason they're switching to a database.

I'm also hesitant to rely on Logseq for another reason. They've taken a lot of funding and now they're in the monetization phase. When I asked about the status of the open source project on Github, the response was crickets.

uselpa• 2 years ago

Full. agree on the data loss issue. I have experienced it myself, and their forum and issue tracker also show this. Its not a « trusted system » at all.

isosphere• 2 years ago

I have been a daily logseq user for at least a couple years now, and I have not had a problem with my data being lost. I have heard of people having this issue with Synching - which I am also using - but I haven't had issues.

I like how the data storage is markdown files. I love the block centered outlier approach and use block references extensively.

I've developed some extensions too. The documentation is severely lacking here, but there are enough extensions on the (currently free and oss) marketplace that can be useful examples.

The query language is really freaking weird to me. It's clojure, datascript/datom. Not intuitive at all, but I've got several custom queries working as part of my workflow.

Overall Logseq is good software and I'd recommend it. Certainly take backups - I have from the start because of experiences like the above - but I haven't needed them yet.

rcarmo• 2 years ago

I just use Foam - https://github.com/foambubble/foam

As a Visual Studio Code extension, it runs everywhere (except some mobile setups), is very fast, and provides me with the ability to tack on more features via other extensions. I set up a “Notes” profile with everything I need, and switch to that for a couple of workspaces.

fastasucan• 2 years ago

This looks great. My issue with obsidian is that I do not want anything else than vscode or my terminal. Will check out this.

vertis• 2 years ago

I'm a big Obsidian user and (small) plugin author, but I'd move to something Obsidian like that was open source because there is a chance of enshittification, looking at this though I can't find any reference to any capability for adding plugins.

They can compare themselves to Obsidian however you like in the features table, but the strength of Obsidian is not in the vanilla experience but in the plugins.

wvh2• 2 years ago

After having been around these note-taking apps for years, I'm still stuck with a directory of text and Markdown files. It's an obvious benefit not to be tied to one application developer's opinion of how to structure a note-taking application, and you can use any editor, Markdown viewer or static site generators to deal with input and output. Also, notes are just files, so there are lots of simple ways to synchronise them between systems (ssh, rsync, syncthing, even imap) and anything can edit a text file.

While some wiki functionality across notes would be nice sometimes, I still am not convinced to give up on the "raw data and bring your own tools" approach yet. Nowadays, most IDEs have across-file functionality anyway and there's a lot more choice and no lock-in going that way.

elric2• 2 years ago

Zettlr is pretty much a text editor on top of a directory with Markdown files. With a bit of extra sauce to make navigation and editing easier. I migrated all my Zettlr notes to Obsidian, and it took zero effort because it's all just Markdown files.

wvh2• 2 years ago

Good to know. But as a text editor, does it compete with your favourite editor or IDE?

cholantesh• 2 years ago

What do you use to read your notes on a phone?

complaintdept• 2 years ago

This. Use it with vim and spend a day mapping any repetitive tasks to streamline things. It's magic. You could also use a bash script for creating backlinks, and it probably wouldn't be difficult to make a graph of all the connections using `dot` (graphviz).

ParetoOptimal• 2 years ago

I find something like org-roam or denote to be the best trade-off.

Roam: Plain text, sqlite database you can delete/generate whenever, simple small codebase.

Denote: Based on grep, no database, simple filename based system, can use any filetype.

hollerith• 2 years ago

Open source, based on Electron.

mitchitized2• 2 years ago

Longtime Joplin [1] user here, how does the most recent version of Zettlr compare? I have grown really comfortable with the simple interface of Joplin, plus using S3 for sync makes life easy for me as I'm living on my own infrastructure.

[1] https://joplinapp.org/

mitchitized2• 2 years ago

Also forgot to mention if it wasn't obvious - I'm not a STEM researcher and don't have aspirations to use a notes app beyond notes, but I am curious about efficiency, simplicity and workflow.

lormayna• 2 years ago

https://silverbullet.md/ it's a nice alternative. It's web based and with a lot of interesting features.

krick• 2 years ago

The main reason why this is completely irrelevant to me is that there's no Android app. Honestly, I don't even know what's the point of having a note taking app that doesn't have an Android version. On the PC you can just use vim. The whole point is having the same representation and conventions on PC and on the phone.

So, yeah, like everyone else I'm still using Obsidian. I hate it, Obsidian is poison and shouldn't be used, because it's completely ridiculous to trust a non open source app with your personal notes, and in my world there's no reason whatsoever for a non open source note taking app to even exist, because it should be pretty trivial thing after all. But unfortunately I am guilty of doing this ridiculous thing myself, because Obsidian has:

- an Android app, that is virtually identical to the PC one

- good search capabilities

- obsidian-flavoured markdown, which is the only kind of markdown that really has all necessary markup for making personal notes, including mathjax, simple graphs and callouts

- daily notes

Honestly, I don't even need anything else, as most plugins actually hurt productivity and are a kind of vendor lock-in anyway, while the whole point of storing data in markdown is simplicity and timelessness of your media. But however simple it's supposed to be, I don't know of any other app so far that would completely clone obsidian in this regard. And, honestly, that's exactly what I want: a perfect open-source clone of obsidian, an exact copy.

bravetraveler• 2 years ago

I take notes with the script below, publishing to Git lol. My window manager (Sway) runs it in a terminal on-login

Respecting "$EDITOR", opens 'this week' and 'last week' in tabs:

    #!/bin/bash
    SCRIPT_NAME=$(basename "$0")
    if pgrep -f "$SHELL.*$SCRIPT_NAME"  | grep -v $$ > /dev/null; then
        echo "The notes are already being edited elsewhere."
        exit 1
    fi
    NOTE_DIR="${NOTE_DIR:-${HOME}/notes}"
    CURRENT_NOTE=$(date +%Y-week%V)
    LAST_WEEK_NAME=$(date -d '7 days ago' +%Y-week%V)
    NOTE_PATHS=("$NOTE_DIR/$CURRENT_NOTE" "$NOTE_DIR/$LAST_WEEK_NAME")
    EDITOR="${EDITOR:-vim}"
    if [[ $EDITOR == *vim* ]]; then
        # Run the vim-like editor with tabs
        $EDITOR -c ':tab all' "${NOTE_PATHS[@]}"
    else
        # Run the editor without vim tab arg; assume array is fine
        $EDITOR "${NOTE_PATHS[@]}"
    fi

Can choose where the notes go with "$NOTE_DIR"

Zettlr: Note-Taking and Publishing with Markdown

Related Stories