$4 ARM PSoC prototyping kits

http://www.cypress.com/?rID=92146

by mdturnerphys • 12 years ago

83 38 12 years ago

guylhem• 12 years ago

Interesting form factor (flat=easy to ship!) and price.

I wonder which features it offers and how it compares to a Raspberry.

Cheaper than the Raspberry, powered by USB, but also connected (usb-serial). No info about memory and flash (I guess some ports must for for a SD or for a USB client)

(it might make a cheap flashrom device - reading the specs ATM to see if SPI is there)

Scaevolus• 12 years ago

This competes with Arduino, not Raspberry Pis. The chips are 24MHz ARM cores with 32KB of flash, and you can get them in PCBs that with pins to fit Arduino shields.

proee• 12 years ago

FYI, this is for the PSoC 4 family.

http://www.cypress.com/psoc4/?source=CY-ENG-HEADER

PSoC® 4 Highlights ARM® Cortex™-M0 CPU up to 48MHz

- Up to 32 kB Flash, 4 kB SRAM

- Programmable Analog: Op-Amps, 12-bit 1Msps SAR ADC

- Programmable Digital: Four PLD-based Logic Blocks

- CapSense® Touch Sensing

- Low Power 1.71 to 5.5V Operation

- 150nA Hibernate Mode, 20nA Stop Mode

amitdeshwar• 12 years ago

Does anyone know what the programming environment is like for these boards?

oasisbob• 12 years ago

The discussion on Hackaday [1] has some more details, supposedly the toolchain is Windows only.

[1] http://hackaday.com/2014/06/16/cypress-launches-5-arm-dev-bo...

joezydeco7• 12 years ago

The Cypress-supplied PSoC Creator IDE is all in C. C++ has been done to some degree with the GCC toolchain. Or you can cross-compile to Cortex-M0 with the language/toolchain of your choice but that's really out there.

joezydeco7• 12 years ago

The PSoC is an interesting animal. Really shouldn't be compared with the Arduino other than the fact they have 8-bit processor cores in the 20-40 MHz range.

The real beauty of the PSoC comes from the things you can do when you hook up the internal analog and digital blocks in interesting ways. Take a look at this example from Cypress:

http://edn.com/design/medical/4421721/Product-how-to--Heart-...

Look at figure 4. Everything not in dark blue is in the PSoC Creator IDE to hook up different blocks on the chip and wire them to do some of the processing that you would normally offload to some other chips in your design. This is how they do CapSense with a minimal amount of external parts. There's lots of tasty A-to-D and D-to-A stuff on here. You can also do all of this stuff at the register level if you think the IDE is not your cup of tea.

USB is also very very easy with this part. You can have a HID device running in a half hour when you use their wizard and then flesh out the stubbed routines it creates for you.

jmpe2• 12 years ago

The 4 & 5LP are 32 bit ARM, the 1 & 3 are 8 bit.

joezydeco7• 12 years ago

Ayup. Sorry. And the PSoC1 barely deserves the name '8-bit', it's a bastardized version of 8051 that Cypress calls M8C. It's nasty.

gte525u• 12 years ago

So it has some sort of CPLD-like functionality internal to the chip to map pins to logical units? Is there somewhere that you've seen that lists all blocks you can map pins to?

jacquesm• 12 years ago

So it has some sort of CPLD-like functionality internal to the chip to map pins to logical units?

Yes:

http://www.cypress.com/psoc/?source=CY-ENG-HEADER

Is there somewhere that you've seen that lists all blocks you can map pins to?

Yes:

http://www.cypress.com/psoc/?source=CY-ENG-HEADER

Timmmmbob• 12 years ago

I think this must be a standard ARM thing. The nRF51822 Cortex M0 (with BLE) from Nordic can do something very similar.

They call it PPI (Programmable Peripheral Interface). All the peripherals (timers, ports, low power comparator, even a quadrature decoder) have "events" and "tasks" and you can wire them up as you please. It's pretty neat. Doesn't have any op-amps or capacitative sensing circuits though.

mbell• 12 years ago

I think this must be a standard ARM thing.

What your describing is just configurable IO pin routing and peripherals with DMA. That has been common for decades and has nothing to do with ARM, nor is it at all related to Cypress's PSoCs.

Nexxxeh• 12 years ago

Cool, the Pulse Ox link at the bottom of the page is even better (and iirc you can use the pulse oximetry information to calculate heartbeat too). Low-cost wireless version with decent battery life would be fantastic.

eric_bullington• 12 years ago

Very cool, but what is the difference between the 4100 and 4200? Do I have to unzip the schematics to find out?

teraflop• 12 years ago

From the datasheets, it looks like the principal difference is that the 4200 has "programmable digital blocks" which are basically micro-FPGA's, programmable in Verilog. I'm not sure how capable they actually are but it's a pretty cool idea.

4100: http://www.cypress.com/?docID=46324 4200: http://www.cypress.com/?docID=46322

AUmrysh• 12 years ago

This is very impressive for being so inexpensive. I assume you program it over the USB plug on the end, is this correct?

joezydeco7• 12 years ago

The USB plug and chip on the left appear to convert USB to serial for communication with the device, so there's probably a bootloader sitting on the PSoC to accept new user code over serial. All PSoCs can reflash themselves from internal code.

There's also a spot for the traditional MiniProg device on the lower right for erasing/reflashing and advanced stuff.

kristaps• 12 years ago

The USB interface looks like it was designed to be snapped off - program your device, remove excess, deploy, just beautiful.

dragontamer2• 12 years ago

The major cost of these sorts of kits is the development environment.

Arduino is great because their tools are all free. Atmel Studio is free, and built on top of GCC. Atmel even offers free software tools for their line of FPGA-AVR chips.

http://www.atmel.com/tools/fpgaintegrateddevelopmentsystems_...

What is the Total-Cost-of-Ownership of PSoC? How much do the software devkits cost?

DigitalJack• 12 years ago

The dev environment is free (although it looks like it is windows only). http://www.cypress.com/psoccreator/

dragontamer2• 12 years ago

Thanks for your quick response.

In that case, it looks like a pretty good deal. Not all chip-manufacturers are willing to give free tools for some reason.

Other companies have digital logic packaged chips... but this is one of the first times I've seen programmable Op-Amps on a cheap SoC.

CamperBob2• 12 years ago

Download link that skips the moronic Java "download manager" requirement: http://dlm.cypress.com.edgesuite.net/akdlm/downloadmanager/s...

crb3• 12 years ago

Any word on whether / how well that Windows-only IDE performs on WINE in Linux? (Hint to Cypress: that Windows-only thing is a dealbreaker for enough of us that you really should address it.)

joezydeco7• 12 years ago

Cypress has shipped over 1,700,000,000 of these chips since introduction. Asking for PSoC Designer/Creator in another OS will probably be met with a very large shrug.

foxylad• 12 years ago

You're probably right, but Windows-only stopped me in my tracks too. I won't bother trying this, because the advantages over an Arduino mini pro (more memory, a snappy USB interface) don't seem to justify the pain of struggling with serial interfaces in WINE.

And although the vast majority of these devices will be going to big industrial users, if I was Cypress I'd consider the cost of developing Linux/Mac versions against the prospect of losing a generation of tinkerers to Atmel.

pravda• 12 years ago

For the curious, shipping is a flat $7.50 in the USA.

You can also get it from distributors for $4 http://www.mouser.com/search/refine.aspx?Ntk=P_MarCom&Ntt=16...

Also, the 4200 series part used on the board seems to cost about $3, but there is a $1 promo going on.

Cypress Semiconductor - CY8C4245AXI-483 4200 Series 32 Bit 48 MHz

http://www.newark.com/cypress-semiconductor/cy8c4245axi-483-...

dmritard96• 12 years ago

so is this just cypress dumping lots of units or is this something they are selling with a margin? someone asked a similar question on hack-a-day earlier today because the PSoC 5 was something like $80.

mdturnerphys2• 12 years ago

The development kits for the PSoC 5 (not the chips themselves) are $99 [1], but there's a lot more on those boards than on these.

[1] http://www.cypress.com/?rID=51577

WasimBhai• 12 years ago

I have worked extensively with PSoC3 chips and they have been rather remarkble beasts to play around with. You know your hardware is only 8 bits. You want to implement FFT for 16 bit numbers. or 32 bits. This is slow. Well, don't fret. I give you CPLD components to design your very own DFT block in hardware which is 16 or 32 bit wide. So you have still some CPLD blocks left? Create another component in hardware, link it with DMA. Finally ahem, you want to do Filters. That is 8051 there, too slow. Use the DSP chip on the PSoC to utilize hardware optimized filters.

Essentially, DMA them all up and you can create a multi-tasking environment in a PSoC chip.

chrisbennet2• 12 years ago

A friend of mine used to make a sell speech chips turned me on to them. I went to a class hosted by a Cypress vendor a couple of years ago. I was excited by the potential for mixed digital and analog designs. Unfortunately, their development tool chain really let me down. After a couple of updates it stopped working and no amount of registry cleaning or re-installing would fix it.

Apparently, I wasn't the only one who had problems: http://failheap-challenge.com/showthread.php?4488-My-rant-ab...

"Designer was a great system for making PSoC's do shit, it worked quite well. Lately though, it's gone to hell leading to some wild speculation around the office of outsourcing, disgruntled employees, corporate favoritism, or a combination thereof. It's gotten to the point where Designer won't even install on my dev system, and it only actually STARTS on one machine in the office."

joezydeco7• 12 years ago

Designer (the old IDE) was pretty bad. Besides that there were two choices for the backend compiler/toolchain, Imagecraft and HiTech. Imagecraft produced awful code, and HiTech got bought by Microchip, who promptly killed all upgrades and support for the product.

Creator was a fresh start and plays much nicer. But that's not to say it doesn't have problems too.

chrisbennet2• 12 years ago

Thanks, I look forward to giving them another try.

$4 ARM PSoC prototyping kits

Related Stories