Show HN: I made my Raspberry Pi a secret phone homing server

http://www.tunnelsup.com/tup/2013/05/08/raspberry-pi-phoning-home-using-a-reverse-remote-ssh-tunnel

by xs • 13 years ago

139 32 13 years ago

decauth• 13 years ago

The use of physical drop boxes placed behind a firewall is nothing new. There is in fact a specific Linux distro for the Rasberry Pi targeted at this use case (see pwnpi.sourceforge.net). It comes packaged with a large suite of penetration testing tools. While building from scratch is a useful exercise for engineers, reinventing the wheel does not merit much attention.

meritt• 13 years ago

You're right, we should discourage people who are actually building things from posting (even if it's nothing earth shattering) and instead encourage folks to post more regurgitated NSA articles and Wikipedia links about crypotography standards or secret government projects.

xs3• 13 years ago

While I use backtrack frequently I found the pwnipi distribution to be lacking in many things and actually ditched it to complete this project. Perhaps I'll revisit that distro again when it becomes better.

voltagex_• 13 years ago

What was it missing?

mikeash• 13 years ago

This would have been an excellent comment if you had just left off the last sentence.

alan_cx• 13 years ago

And the first sentence. The middle bit, useful.

ericHosick• 13 years ago

Reinventing the wheel teaches people how to invent and how to create. Everyone, especially young adults, should be encouraged to reinvent the wheel.

bluetooth• 13 years ago

Here's a similar project based on another similar project that's been around for quite some time: http://penturalabs.wordpress.com/2013/04/25/blue-for-the-pin...

Original project: http://hakshop.myshopify.com/products/wifi-pineapple

dfc• 13 years ago

A tor hidden service with ssh is a great way to set up a reverse tunnel:

https://www.torproject.org/docs/hidden-services.html.en

aseidl• 13 years ago

A few suggestions:

SCP'ing the public key directly to ~/.ssh/authorized_keys could overwrite the file if it already exists. It's better to use 'ssh-copy-id', which takes care of everything for you. Most distros should have it already.

Autossh can take care of setting up, monitoring, and restarting the tunnels for you. Arguments are almost exactly the same as ssh, just toss it into your crontab and have it run @reboot.

Fuxy• 13 years ago

Actually you can write a nice little script that treats autossh like a daemon and restarts it if it crashes.

I did something like that on Arch linux.

Also it's probably a good idea to give it a user with limited permissions on the server it's connecting back to so if somebody finds it the can't just use it to hack your box.

curiousAl• 13 years ago

Nice, now I can read all those memos/meeting reminders from th e comfort of home.

brokentone• 13 years ago

Cool project, I've thought about doing something similar and bought a gumstix for roughly this reason before the Pis were out (although power is harder to figure out on Gumstix).

Slightly ominous line: "I have this plugged into an office somewhere."

mey• 13 years ago

http://pwnieexpress.com/products/power-pwn

mrmekon• 13 years ago

These things are fun, and certainly not new. You can buy devkits that already look quite unobtrusive: http://en.wikipedia.org/wiki/SheevaPlug

The one in this article looks like a fire hazard. I guess that's one way to cover your tracks :P

skeletonjelly• 13 years ago

Get discovered? Fire off a forkbomb!

lgeek2• 13 years ago

Is the power adapter board sitting on top of the Pi? They should be separated by some panel to avoid shortcircuits and/or feeding mains power into it. It looks like there's enough space too.

wwwhizz• 13 years ago

Some tape would suffice too.

lgeek2• 13 years ago

I disagree, tape isn't that reliable for covering larger areas with sharp and uneven surfaces. Plus, it tends to peel off by itself when heated. Should be better to just secure the two boards apart from each other at opposite ends of the case.

blacksmith_tb• 13 years ago

Self-fusing silicone tape would be an adequate solution, I would think, esp. if you wrapped a couple of times.

thu• 13 years ago

Someone who finds the brick can ssh into his server... that seems weird.

omh• 13 years ago

You should be able to limit the account that it's ssh-ing into so that it's just used for the tunnel. Or if you're really paranoid, limit the entire thing to a dedicated virtual machine.

jawns• 13 years ago

"Now I am on a computer in someone elses network. Woohoo! Now I can do remote tech support more effectively."

Great line. Now, if only the NSA were as helpful with its remote tech support.

urza• 13 years ago

https://pagekite.net/

riobard• 13 years ago

For the purpose of physical drop boxes, there are much better tools than a Pi. For example this one http://wiki.openwrt.org/toh/tp-link/tl-wr703n is cheaper (< $20), smaller, much more power efficient, and comes with WiFi! Strip the wrapping plastic box and you can hide it practically anywhere with batteries powering it for days.

Morphling• 13 years ago

This "attack vector" is relying on the fact that you get physical access to the targets router/switch, so you can connect to the network and I think network admins would stop extra PSU in their networking closet pretty fast.

Which started me thinking... What if you would build RPi or similar small device into a router's casing and made it act like a router on the same time. Obviously you'd have to have some way of copying configs over from the old box to the impostor box, but it could be harder to spot since there wouldn't be any extra hardware.

freehunter• 13 years ago

And if the company has a competent security team, they're going to find this quickly and bring in Terremark or Solutionary or another forensics company. It won't be long before you're found, especially if you hit a compliance network.

DanBC• 13 years ago

eh, when you have people sleeping in cupboards and other people hiding laptops in cupboards I'd say it depends on the network.

(http://www.economist.com/news/obituary/21569674-aaron-swartz...)

fduran• 13 years ago

443 is a better outgoing port since https is rarely going to be blocked

benkillin• 13 years ago

Setting I2P up on the RPi then setting ssh up to listen on a I2P hidden service on the RPi would be better than the method shown. That way if the device is discovered it would be impossible to trace back the actual IP address of the person connecting to it and an adversary obtaining your ssh key wont be able to log into any of your servers.

Check out this presentation from DerbyCon about using a cheap NAS to do something similar: http://www.youtube.com/watch?v=dxdm86r26Co Irongeek has a writeup about the same thing here: http://www.irongeek.com/i.php?page=security/svartkast-pogopl... and some instructions to do it specifically on an RPi: http://www.irongeek.com/i.php?page=security/raspberry-pi-i2p...

Show HN: I made my Raspberry Pi a secret phone homing server

Related Stories