NUMA: Cores, memory, and the distance between them

https://edera.dev/stories/numa-part-1-cores-memory-and-the-distance-between-them

by sys_call • 28 days ago

140 33 28 days ago

lukax• 24 days ago

NUMA can cause really crappy performance. We deployed a Go based LLM gateway in Kubernetes deployed on a server with hundreds of CPU cores. We didn't explicitly set GOMAXPROCS so Go runtime scheduled goroutines over different CPUs and it constantly used 200% CPU and GC was causing latency spikes. Then we set GOMAXPROCS 8 and all performance issues went away. Until recently Kubernetes didn't work well with NUMA.

re-thc• 24 days ago

Is this on AMD? I wonder if it's all to do with NUMA or their CCD architecture etc (well these days Intel and everyone also does it to some extent).

toast02• 24 days ago

Hundreds of cores is likely two sockets and so you've got NUMA there.

Scaling to large core counts has a lot of gotchas.

Twirrim2• 24 days ago

Intel suffers just as much when NUMA enters the picture, even prior to CCD style architecture. That extra latency hop across to the other core to get at memory is absolutely crippling, especially in a hot loop. It requires very careful handling, while being this kind of invisible element (unless you know to look for it, nothing will draw your attention to it)

CarRamrod• 24 days ago

There is one instance where the NUMA performance never disappoints: https://www.youtube.com/watch?v=Cqd1Gvq-RBY

drunkboxer• 24 days ago

There are in fact two instances https://www.youtube.com/watch?v=ZBKm1MBsTbk

gopalv• 23 days ago

Kubernetes deployed on a server with hundreds of CPU cores

Was that a Power9 or some sort of IBM machine?

Not all NUMA is the same, ccNUMA from the Intel is a different beast from the PPC version of the same.

strifey• 23 days ago

Heck, we saw crazy performance degradation with redis when its memory usage exceeded a single NUMA block. Not much to be done about that at the k8s level when redis is single-threaded. Have to be super conscious of the underlying hardware at that point.

0x457• 23 days ago

In that case I run one redis instance per NUMA domain. On my home server I essentially split machine in two and treat it as two distinct machines. PCIe devices attached to a proper domain etc.

nanibot• 23 days ago

I don't see how GOMAXPROCS alone can help here though. You would have to use Topology Manager (single-node policy) to avoid cross-NUMA allocations. This is in addition to other managers - Memory and CPU Manager.

CPU Pinning (via CPU Manager's Static Policy) will also be required to ensure your processes don't just get a CFS quota/share but are actually pinned onto specific CPU cores.

pjmlp• 23 days ago

Some lessons are never lost it seems, back when Windows NT was recent, we had to lock threads/processes to specific CPUs on SMP machines (affinity), exactly for similar reasons.

treesknees• 24 days ago

Something I didn’t see mentioned was that this unequal memory access time also affects pcie I/O. If your thread on CPU A needs to get data in or out of a nic on CPU B, your throughput/latency will be impacted.

We have to explain this to customers of our software all the time, it’s something that’s easy to miss.

suprjami• 24 days ago

Same. The drop in performance can be surprisingly bad. 10Gbps becomes 5Gbps. 100Gbps becomes 20Gbps.

alexzenla2• 23 days ago

When building Edera (product from article), I also had the added problem of the virtual networking gap where I was bridging a 10Gbit NIC over a virtual interface, and I had weird performance bouncing between 3Gbit and the full 10Gbit. Luckily I had built networking drivers before and knew the complexities of it, and managed to profile it down to the virtual interface getting worst-case NUMA occasionally.

The part 2 is going to cover how we actually solved it, which involves every part of the system having knowledge. It's so easy to ignore but it has a massive impact on perf.

alexzenla2• 23 days ago

(CTO of Edera here)

Great point! We also try to factor that in as well.

Steven (the author) will cover that in part 2!

frollogaston2• 23 days ago

Was going to mention this too, as it burned me once. Not cause I didn't know about it but because I was accidentally running stuff on the wrong node, and it wasn't obvious which slot was which node.

Twirrim2• 24 days ago

NUMA is one of those amazing things that trip you up in all sorts of ways at unexpected times. The amazing "invisible" performance killler (invisible because unless you're already aware of NUMA, or remember to check, you won't know it's there potentially crippling you.)

It has been a source of routine conversations with customers and engineers of all kinds, and often one of those things you don't know about until too late.

I don't know if the kernel has improved this behaviour in the several years since last tested, but a coworker realised that the linux page-cache wasn't fully split by NUMA node. They were benchmarking mysql running it in each NUMA node, and noticed the second NUMA node was noticeably slower. Then discover after a reboot the second node was fast, and the first was slower. After a bit of thinking and tinkering they discovered that libmysql was ending up in the page cache in the same NUMA node as the benchmark client was run in first, so even though they were pinning the benchmark tool and mysql process to the NUMA node, the benchmark client was causing the OS to reach across the NUMA node to get at the page cached library.

jeffbee3• 23 days ago

It's unfortunately a hard message to sell, but your program itself should never be backed by a file, for this exact reason. All code should be remapped into anonymous memory that is 1) right where you want it; 2) backed by hugepages; and 3) not shared. You are gaining nothing by trying to share objects with other processes, and you are losing a great deal of performance. The tradeoff made a little sense in the 1980s when they came up with it but in this century it simply doesn't.

nly• 23 days ago

If the code is mapped readable and not mutated how does it make a difference?

The code will be prefetched in to local (executing) CPU cache just the same. No invalidations will take place across NUMA zones.

Modern DLLs on e.g. Linux use PIC and not mutable relocations.

iofiiiiiiiii• 24 days ago

Yeah, when you have tall servers this can be a really surprising factor. In some sense you could view this as an extension of processor caching behaviors, which also causes some memory accesses to be lower - just due to cache behaviors, not physical location. But in many cases, the same tools can be used to fight both "far" memory accesses and cache trashing, by using a thread-isolated architecture.

I have been dealing with the topic for a few years now and it was surprisingly hard to track down the bottlenecks to actual numbers. Some time ago I managed to find a good example to demonstrate the effect in a tangible way and wrote up an article about it. If the topic sounds interesting, you might enjoy https://sander.saares.eu/2025/03/31/structural-changes-for-4... (Structural changes for +48-89% throughput in a Rust web service).

jpecar• 24 days ago

I'm baffled by the fact that NUMA is still an issue in 2026. My impression is that this was all solved back in dotcom era already on those big SUNs. At least in HPC we solved this already in mid 2000s. Why is supposedly modern world still wasting time on this? Kernel these days exposes just about everything you would ever want to know about a system topology and every runtime should be making use of that information. If it does not, I cannot consider it ready for this century.

mickeyp• 24 days ago

Because numa topology is an optimisation problem with a wide solution space, and that its configuration and setup depends on the amount of physical cpus and cores; how the RAM is connected to which lanes; and on and on it goes.

If it does not, I cannot consider it ready for this century.

Mhmm.

sillywalk• 23 days ago

those big SUNs

I'm pretty sure all the big Sun boxes were SMP, not NUMA, at least during the dot-com era. Not sure about later UltraSPARC T or M Series systems.

itemize123• 23 days ago

what do you mean by this is solved?

inkyoto• 23 days ago

Sun was one of the few RISC design houses who stubbornly resisted NUMA in favour of SMP, which they have perfected in the hardware and in the software (Solaris). The «Solaris internals» book discusses the subject of SMP vs NUMA vs ccNUMA in the «Parallel systems architectures» section (3.2).

You might be thinking SGI who went in big on NUMA. IBM and HP have also built ccNUMA systems (e.g. HP Superdome and Superdome 2).

jeffbee3• 23 days ago

My question: why do mainstream users tolerate NUMA? 99% of you don't need to. Single-socket servers exist and they are not only tolerable but better in most ways. Dealing with NUMA in software consists of trying to logically partition the machine, but you can instead physically partition the machine. It's so much simpler!

Amazon gets this. Except for the 4th generation their Graviton systems are not NUMA.

toast02• 23 days ago

NUMA latencies across machines are way worse than across sockets or across core complexes. :p

Single socket doesn't necessarily get you away from NUMA anyway, AMD server sockets are 4 way NUMA (you can set it for interleaving, but you could do better with NUMA-aware software), and I think Intel is doing NUMA on server socket as well.

A lot of people like to take one big machine and partition it into several smaller virtual machines. In that case, it shouldn't be too hard to partition vms into NUMA zones? Only vms that are two big to fit in one zone have to worry about it (or that need to be repacked into a different zone)

jeffbee3• 23 days ago

AMD's NPS4 mode isn't exactly user-friendly, I agree. But you can put it into NPS1 mode and relax. Graviton 5, as a counterpoint, doesn't give you the option. Physically there is a 2D mesh between the cores and the memory controller but the observable behavior is that every access gets the average mesh fabric latency. The efficiency you leave on the table isn't very large, whereas in multisocket NUMA you can't ignore the cost.

I think you can over-analyze this stuff and lose your sanity. On these multicore systems there are also hot cores in the center of the mesh and cold ones at the edges and theoretically you could be doing temperature-aware scheduling, gaining a bit more efficiency in doing so. But it's just easier to adopt the black box model of spherical frictionless CPUs.

frollogaston2• 23 days ago

The NUMA use cases exist, but given the rarity, I'd rather the default behavior not prioritize them. Currently you have to explicitly tell the system not to let a task use multiple nodes' resources, not just CPU/memory but also PCIe. Maaybe it's smart enough to avoid some cross-node usage, but it's a soft heuristic rather than a clear rule, which actually makes it more of a footgun than being dumb about it.

I would rather it be the other way around, never allow a single process to do anything cross-NUMA unless it asks for that, maybe even be stricter and require a process to opt into using anything but node0. These machines are big enough that you're not going to saturate node0 with random tasks, and you're only going to saturate the whole machine with a more deliberate workload.

senderista• 23 days ago

Complete slop from start to finish. Some of the distinctions manufactured by the LLM author are nonsensical: “a thread may run on node 0 but access data on node 1. Conversely, it could also run on node 1 but access data on node 0.” These cases are different how? Or “there are 3 possible cases. A thread might run on the right node but access data on the wrong node. Or it might access data on the right node but run on the wrong node. Or both.” WTF could this possibly mean? This hallucinated nonsense logic wastes the time of the reader and whoever posted it, and whoever submitted it anyway, should be ashamed of themselves. The prevalence of this garbage just makes it harder to find accurate sources on topics of interest. They are certainly out there, but it’s getting harder and harder to find them.

cmgriffing• 23 days ago

I can't be the only person who saw "NUMA" and then read the word "memory" in the title as "Memora-hee, Memora-haa".

sharts• 23 days ago

Why use NUMA if most of the time to get max performance you need locality and thus end up pinning things to a specific node to avoid the cost of crossing nodes. Moreover, you almost always must set this manually.

Wouldn’t it just be easier to skip it all together and just use single node architectures for much less cost and time?

tzach• 23 days ago

https://github.com/scylladb/seastar High performance server-side C++ framework (used by ScyllaDB, ceph.io, redpanda..) us using a NUMA aware allocator

NUMA: Cores, memory, and the distance between them

Related Stories