Qwen3.5 Fine-Tuning Guide

https://unsloth.ai/docs/models/qwen3.5/fine-tune

by bilsbie • 5 months ago

416 59 5 months ago

unsloth.ai

clueless• 5 months ago

What are some sample real world cases folks are using to fine tune their own small/medium models?

danielhanchen4• 5 months ago

Oh I wrote up a post on X on this exact question! https://x.com/danielhanchen/status/1979389893165060345?s=20

1. Cursor used online RL to get +28% approval rate: https://cursor.com/blog/tab-rl

2. Vercel used RFT for their AutoFix model for V0: https://vercel.com/blog/v0-composite-model-family

3. Perplexity's Sonar for Deep Research Reasoning I think was a finetuned model: https://docs.perplexity.ai/docs/getting-started/overview

4. Doordash uses LoRA, QLoRA for a "Generalized Attribute Extraction model" https://careersatdoordash.com/blog/unleashing-the-power-of-l...

5. NASA flood water detection https://earthdata.nasa.gov/news/nasa-ibm- openly-release-geospatial-ai-foundation-model-nasa-earth-observation-data6

6. Online RL for robotics - imagine you teaching a robot in the future via some mini finetuning

7. OpenAI's RFT page has more: https://developers.openai.com/api/docs/guides/rft-use-cases

8. For larger models - https://www.mercor.com/blog/expert-data-drives-model-perform...

azath923• 5 months ago

Only to prompt thought on this exact question, im interested in answers:

I just ran a benchmark against haiku of a very simple document classification task that at the moment we farm out to haiku in parallel. very naive same prompt system via same api AWS bedrock, and can see that the a few of the 4b models are pretty good match, and could be easily run locally or just for cheap via a hosted provider. The "how much data and how much improvement" is a question i dont have a good intuition for anymore. I dont even have an order of magnitude guess on those two axis.

Heres raw numbers to spark discussion:

|---------------|----------|-------|----------|-----------|

| llama-70b -----| 83 | 98 | 96 | $0.72 |

| gpt-oss-20b --| 83 | 97 | 92 | $0.07 |

| ministral-14b -| 84 | 100 | 90 | $0.20 |

| gemma-4b ----| 75 | 93 | 91 | $0.04 |

| glm-flash-30b -| 83 | 93 | 90 | $0.07 |

| llama-1b ------| 47 | 90 | 58 | $0.10 |

percents are doc type (categorical), year, and subject name match against haiku. just uses the first 4 pages.

in the old world where these were my own in house models, id be interested in seeing if i could uplift those nubmers with traingin, but i haven't done that with the new LLMs in a while. keen to get even a finger to the air if possible.

Can easily generate tens of thousands of examples.

Might try myself, but always keen for an opinion.

_edit for table formatting_

airstrike• 5 months ago

if you add 2 spaces at the start of the line, you turn it into a code block

  like this

faxmeyourcode3• 5 months ago

Labeling or categorization tasks like this are the bread and butter of small fine tuned models. Especially if you need outputs in a specific json format or whatever.

I did an experiment where I did very simple SFT on Mistral 7b and it was extremely good at converting receipt images into structured json outputs and I only used 1,000 examples. The difficulty is trying to get a diverse enough set of examples, evaling, etc.

If you have great data with simple input output pairs, you should really give it a shot.

arkmm2• 5 months ago

You can fine tune a small LLM with a few thousand examples in just a few hours for a few dollars. It can be a bit tricky to host, but if you share a rough idea of the volume and whether this needs to be real-time or batched, I could list some of the tradeoffs you'd think about.

Source: Consulted for a few companies to help them finetune a bunch of LLMs. Typical categorical / data extraction use cases would have ~10x fewer errors at 100x lower inference cost than using the OpenAI models at the time.

clipclopflop• 5 months ago

Hi! I think this is a pretty good example:

https://www.atredis.com/blog/2024/6/3/how-to-train-your-larg...

ygouzerh• 5 months ago

I am thinking to fine-tune it to recognize better my handwriting. It already works quite well by default, but my writing is just horrible, so it got trouble sometimes.

syntaxing• 5 months ago

Awesome guide, shame how a couple of the Qwen leads got kicked out and replaced with more “business” minded leadership. Hopefully this doesn’t mean the end of the open source era from Qwen.

danielhanchen4• 5 months ago

Oh I think on X a few ago: https://x.com/poezhao0605/status/2029151951167078454 - Alibaba's CEO and CTO are having an emergency all hands now! Hope it all goes well!

antirez2• 5 months ago

Fine tuning is a story that is nice to tell but that with modern LLMs makes less and less sense. Modern LLMs are so powerful that they are able to few shot learn complicated things, so a strong prompt and augmenting the generation (given the massive context window of Qwen3.5, too) is usually the best option available. There are models for which fine tuning is great, like image models: there with LoRa you can get good results in many ways. And LLMs of the past, too: it made sense for certain use cases. But now, why? LLMs are already released after seeing (after pre-training) massive amount of datasets for SFT and then RL. Removing the censorship is much more efficiently done with other techniques. So I have a strong feeling that fine tuning will be every day less relevant, and already is quite irrelevant. This, again, in the specific case of LLMs. For other foundational models fine tuning still makes sense and is useful (images, text to speech, ...).

ranger_danger• 5 months ago

where it makes sense IMO is when you need it to know about a large amount of information that's not already in the model, such as a company knowledgebase, code repositories or a trove of specialized legal documents... in that case it's not realistic to try to stuff the context window every time with that information, especially if you're trying to make a responsive chat bot.

antirez2• 5 months ago

With the current context windows and the ability those models did RL to work as agents, it's much faster and reliable for them to use tools and find the information before replying. Much better, no hallucinations problems (or a lot less), no fine tuning needed when information changes. I believe it is exactly in this case that fine tuning is no longer useful, and even in the past worked at very different degrees of quality.

dotancohen• 5 months ago

Wouldn't a RAG make more sense for this use case?

larodi• 5 months ago

indeed, and in practical terms, this is more often than never, and particularly with large knowledge bases. also makes super sense for VLMs and ViT models.

prettyblocks3• 5 months ago

I think the biggest case for fine tuning is probably that you can take small models, fine tune them for applications that require structured output, and then run cheap inference at scale. "Frontier LLMs can do it with enough context" is not really a strong argument against fine-tuning, because they're expensive to run.

throwaway6977• 5 months ago

I agree- I'm currently trying to learn how I can embed a fine tuned tiny model into my c++ game so it can provide a narrative in prose of certain game-event logs. It needs to be as tiny as possible so it doesn't take resources away from the running game.

derwiki• 5 months ago

Exactly, inference cost is a very good reason to fine tune with something like Qwen

butILoveLife3• 5 months ago

This is literally what I'm waiting for. I want a ~8B model that works well with OpenClaw.

Me1000• 5 months ago

Wouldn’t it be better to use a grammar in the token sampler? Tuning is fine, but doesn’t guarantee a syntactical correct structured output. But if the sampler is grammar aware it could.

faxmeyourcode3• 5 months ago

Especially for super constrained applications. I don't care if the language model that I use for my extremely specific business domain can solve PhD math or remember the works of Shakespeare. I'd trade all of that for pure task specific accuracy.

_the_inflator• 5 months ago

I agree.

Also for certain use cases there are constraints like embedded hardware systems with no internet access. These LLMs have to be trained to specialize for clearly defined use cases under hardware constraints.

Frontier LLMs also are rarely function in isolation instead are orchestrating a system of special units aka subsystems and agents.

While costs and effort are one thing, being able to downsize these monster LLMs through finetuning itself in the first place is extremly valuable.

andriy_koval2• 5 months ago

"Frontier LLMs can do it with enough context" is not really a strong argument against fine-tuning, because they're expensive to run.

I am not expert in this topic, but I am wondering if large cached context is actually cheap to run and frontier models would be cost efficient too in such setting?

esafak• 5 months ago

I would like model adaptation algorithms like Doc-to-LoRA (https://pub.sakana.ai/doc-to-lora/) to go mainstream.

danielhanchen4• 5 months ago

These are fair points considering LLMs are getting smarter and better every week - but to be fair the biggest benefits of finetuning / RL are still not yet realized:

1. If we have robots at home, they need some sort of efficient continual learning, which could be on the go finetuning / RL via some small LoRA - this will need to do multimodal finetuning with sparse reward signals - one could also imagine all data is aggregated to one central processing center after anonymization, and training a larger model with more data + RL like that

2. Agreed images, audio, video etc is what still LoRA does well - the guide at https://unsloth.ai/docs/models/qwen3.5/fine-tune is actually a vision + text finetuning guide, so you can finetune the vision layers on your own use case

3. Model routing is going to be more the norm in the future - ie locally smallish models with LoRA for continuous finetuning can be used, but complex tasks can be offloaded to a large LLM in the cloud.

4. I also wrote about more use-cases below on the post - DoorDash, Vercel, Mercor, Stripe, NASA, Perplexity, Cursor and many others all do finetuning - for eg Cursor, Perplexity finetune large OSS LLMs themselves for their specific product lines - so there is definitely value if you have the data for it.

canyon289• 5 months ago

I work on Gemma and Gemini models I want to echo Daniel's point here. Small finetuned models have their place even with larger general purpose models.

For example last year with Daniel/Unsloth's help we released a tiny specialized model that can get equivalent to Gemini level purpose specifically for FC. For folks that need efficient limited purpose models small models like this can fit a specific need.

https://blog.google/innovation-and-ai/technology/developers-...

Especially on device. https://developers.googleblog.com/on-device-function-calling...

It's the same with chips, we have general purpose CPUs but we still have specialized silicon for tasks that are smaller, more power efficient, cheaper, and because they're single purpose it simplifies and derisks certain designs.

And I have to add, if you want to learn about finetuning models efficiently the Unsloth guides are at the top of my list. They're practical, have all the technical details, and most importantly Daniel and the others are working around the clock to keep it up to date in what is an incredibly fast moving space of models and hardware. I am continually astounded by their work.

KronisLV• 5 months ago

But now, why?

Because these models are good in general but their Latvian output is half-drivel, like the roots of the words are usually the right ones, but not the rest.

That, and EuroLLM is really slow to release new models that would be similarly good off the shelf.

abhgh• 5 months ago

They are great for specialized use-cases: (a) where the problem is not hard enough (you don't need reasoning), or (b) diverse enough (you don't need a world model), (c) you want cheap inference (and you can make it happen hardware-wise) and (d) you either have enough data or a workflow that accumulates data (with fine tuning with enough data you can sometimes beat a premier model while ensuring low latency - ofc, assuming (a) and (b) apply).

I make it sound like a rare perfect storm needs to exist to justify fine tuning, but these circumstances are not uncommon - to an extent (a), (c) and (d) were already prerequisites for deploying traditional ML systems.

joefourier• 5 months ago

Fine-tuning still makes sense for cost/latency-sensitive applications. Massive context windows drastically slow down generation, and modern models' performance and instruction following ability relies heavily on a reasoning step that can consume orders of magnitude more tokens than the actual response (depending on the application), while a fine-tuned model can skip/significantly reduce that step.

Using the large model to generate synthetic data offline with the techniques you mentioned, then fine-tuning the small model on it, is an underrated technique.

sweaterkokuro• 5 months ago

As strong as current LLMs are they are easily distracted from the task often. At production scale, fine tuning can make a lot more sense given you provide the model a very specific task.

andsoitis• 5 months ago

For agentic coding, which do you prefer:

a) qwen3-coder

b) qwen3.5 (general)

bravura• 5 months ago

For me, trying to fine-tune a model to write "best day" prose I would accept over 80% of the time.

You are correct if we are talking about knowledge.

However it is bad at hyper-idiosyncratic, gritty style transfer.

I first noticed the issue when asking claude code to draft email responses. The choice of register was off. ("Register in writing refers to the level of formality and tone chosen to suit a specific audience, purpose, and context.")

I decided to talk all my HN comments and rewrite them in various bad LLM prose, and see if I could use DSPy to optimize a prompt using in-context-learning (ICL, I give it 10 examples of my HN comments) and the results were abysmal. RHLF fine-tuned frontier LLMs have a deep seated aversion to the target stylistic distribution of my comments.

I tried fine-tuning qwen3, llama, and gemma models. Instruct models are already so tuned that they could not be tuned. This is using several hunded comments as gold targets and 5 different LLM degradations per gold as the input.

HanClinto• 5 months ago

How well would you say it worked? I do like the idea of taking my historical forum posts and e-mails and whatnot and training an autocomplete LLM that is specifically "my voice".

kristianp• 5 months ago

Instruct models are already so tuned that they could not be tuned

Some models have the base model available, that is before instruction tuning. For example llama 3 comes in "pre-trained and instruction tuned variants" [1]. I'm guessing you already know that though.

[1] https://huggingface.co/meta-llama/Meta-Llama-3-8B

mountainriver• 5 months ago

If that were true, we would be able to run working agents out of the box on any domain.

We are far from that still, for reliability in most applications you need fine tuning.

For any new modality you need fine tuning

For voice, image and video models you need fine tuning

For continual learning you (often) need fine tuning.

For any domain that is somewhat OOD you need fine tuning.

To fully ground a model you need fine tuning

woctordho• 5 months ago

In one word, porn.

Qwen filtered out a lot of porn during data curation, and a finetuned model can perform much better than context engineering. Abliteration can only remove censorship, not add something non-existent in the training data.

This guy did some great work in the age of Qwen 3.0: https://huggingface.co/chenrm/qwen3-235b-a22b-h-corpus-lora

iamleppert• 5 months ago

The problem with this is context. Whatever examples you provide compete with whatever content you want actually analyzed. If the problem is sufficiently complex, you quickly will run out of context space. You must also describe your response, in what you want. For many applications, it's better to fine-tune.

aliljet• 5 months ago

Does fine tuning really improve anything above just pure RAG approaches for usee cases that involve tons of direct document context?

44za12• 5 months ago

Specialised models easily beat SOTA, case in point: https://nehmeailabs.com/flashcheck

NitpickLawyer• 5 months ago

Remember how the tab-next-action model from Cursor was all the rage ~2 years ago when they launched it? That was a fine-tune of a ~70b model (they kinda alluded to this in a podcast).

bugglebeetle• 5 months ago

Unfortunately, this looks to only cover the larger MoE models. I imagine the smaller models are what most people would target. 9B just dropped two days ago, so not surprised it’s not explicitly documented, but does use a hybrid mamba architecture that I expect needs some special consideration.

Qwen3.5 Fine-Tuning Guide

Related Stories