700+ hp electric Honda S2000 built by high school senior

http://hackaday.com/2012/09/16/700-hp-electric-honda-s2000-built-by-high-school-senior/

by ek • 14 years ago

65 53 14 years ago

hackaday.com

chrsstrm2• 14 years ago

What's the weight of the 104 batteries and the gain/loss after removing the gas engine and replacing with electric?

001sky2• 14 years ago

s2000 is a rwd car and likes to spin. this is not a trivial question.

001sky2• 14 years ago

"The battery pack will consist of 416 cells with 4 cells in parallel and 104 in series...The batteries will be A123 20Ah prismatic cells. " Approx 460 pounds just for the cells.[1]

___________

Notes: http://www.a123systems.com/prismatic-cell-amp20.htm

~500g each (1.1 lb) based on a quick google [tbc]

ricksta• 14 years ago

A123 cells are about 180wh per kg, hes using 20ah 4 at 104 cells in series. so thats about 104 3.7 = 396 volts at 120ah. multiply that together you get 47kwh of energy. These batteries would be around 500lb.

These battery pricing must've came down a lot over the past couple years because this would've cost something like $40k couple years ago, but a quick google for pricing looks like the battery pack he is using can be bought for around $13k pricing source: http://www.a123rc.com/goods-468-Excitingly+Powerful+A+123+20...

chrsstrm2• 14 years ago

500lbs in batteries and a quick search shows each of his motors is 156lbs. Since the gas motor he took out weighed 326lbs, he's got a net gain of ≈ 480lbs. That's a lot to overcome.

Tossrock• 14 years ago

There's much more information in the linked forum thread: http://www.s2ki.com/s2000/topic/975497-wait-that-isnt-an-f20...

For example, he also built a keyless entry system with an arduino board and an iPod. This kid is pretty amazing.

andyjsong2• 14 years ago

Does anyone else not see any of the pics submitted by the OP in the forum?

ChuckMcM• 14 years ago

Interesting that he bought the batteries "in china" (his scare quotes), I'm wondering if they are off market copies? Having built high current battle bot battery boxes I get really really twitchy around "good deal" battery packs. That said, its amazing how 'off the shelf' this tech is becoming. Hats off to this guy for taking the challenge.

BryanB55• 14 years ago

Just read through the whole thread on the s2000 forum, I'm an auto enthusiast but I was more interested in how this kid knows how to do all of this more than I am interested in the car. 16 years old and you know how to retrofit an s2000 with a custom electric motor and build CAD models of it!?

StavrosK• 14 years ago

He's 16 years and 300 months old.

hyperbovine• 14 years ago

Props to the kid for being such a whiz, but DAE shudder at the thought of a 17-year old getting behind the wheel of this thing? My mom's minivan had about 150hp and I still managed to do incredibly stupid shit with it. All the while believing I was an above-average driver...

jasonquinn• 14 years ago

I've met anyone who doesn't describe them self as a above-average driver

djt2• 14 years ago

Only a 15% loss of power to the wheels is very low.

Just the drivetrain loss on muscle cars is around 30% approximately.

lloeki• 14 years ago

Honda has fantastic performance gearboxes and drivetrain loss is usually in the low 20%.

Also most muscle cars are slushboxes and the torque converter ruins efficiency.

djt2• 14 years ago

looks like tesla's are about 88% efficient, so definitely in the range.

SunboX4• 14 years ago

Let´s see if he get´s this thing working. Building two e-motors and some batteries inside a car is a very "easy" task compared to building the "control unit" and cooling the batteries down. This two motors will draw a lot current, the electrics to control this huge amount of current will be a hard task to figure out. Another one is the battery cooling. 700hp will take a lot energy, the batteries will get very hot. If you ever had played a 3D game on your phone, you know what I mean. ;o)

If he get´s this thing working, it would be really great! I can´t wait to call a electric car my own. :D

If you interested in such kind of work, you should search on Youtube for "electric VW Golf II", "electric VW Polo" or "electric VW Käfer". ;o)

SunboX4• 14 years ago

And if he want´s to build a "good" electric car, he should keep an eye on the EMF and EMI radiation.

eckyptang• 14 years ago

Good point, although I can see the ricers using this to cause trouble instead of their boom boxes instead :(

cantbecool• 14 years ago

There's no way he's getting 700+ HP from those two warp 9 motors. It says each motor is capable of outputting 34HP continuously: http://electriccarinternational.com/media/img-prod/WarP_9_Sa...

mercuryrising• 14 years ago

Nope, but it will drive a car, just not as fast as I'm sure he would like.

When he realizes his error, he'll be able to reason much better about electrical and mechanical engineering than many of his peers in school (if he decides to go to college) due to having actual experiences of failing in the real world (rather than just on paper). Good for him.

SunboX4• 14 years ago

I also don´t see any kind of transmission. I don´t think it´s a good idea to mount the motors directly to the drive shaft.

Edit:

http://electriccarinternational.com/media/img-prod/WarP_9_Sa... mentions 5.800 RPM (min. 2.000, max. 5.800 RPM). Thats too much to drive the wheels directly. Does anyone see a gearbox in the forum?

Zak7• 14 years ago

That appears to be at 144 volts and 500 amps. His stated plan is to deliver 343 volts and 2000 amps. Assuming this doesn't melt the motors, he'll get more power than the datasheet claims. That said, his calculations might be a bit off.

144Vx500A = 72KW or 96.5HP. He's assuming 85% efficiency, which would give 82HP, not 34. Furthermore, if the motor were to deliver 100 ft-lbs of torque as stated at its stated maximum speed of 5800 RPM, that would be 110HP. This would obviously require more than 72KW of electrical power input.

Taking the ratio between the motor's stated performance and the electrical numbers given on the datasheet, and multiplying by the electrical power he intends to supply, we get 34/96x920 = 326HP. This too seems a bit off, as 35% efficiency is quite low for an electric motor. My guess is that the motor is actually incapable of producing its full torque at higher RPM.

My guess is he will actually produce something resembling the amount of power he's hoping for, but only briefly, after which they will deliver no power at all, ever.

jrabone• 14 years ago

Without the torque-speed curves for these motors, you just can't tell.

The actual graphs are at http://www.go-ev.com/images/003_09_01_WarP_9A_Graph.jpg and http://www.go-ev.com/images/003_09_02_WarP_9_SpreadSheet.jpg

My guess is that the motor is actually incapable of producing its full torque at higher RPM.

Correct. At 100 ft/lbs the speed drops to just over 2000 rpm.

I would guess these motors have a thermal fuse wound into the stator coil (source: spent a summer in a rewinding shop), and if he tries to drive them much outside the design limits, they'll simply cut out, perhaps permanently.

EDIT: the datasheet mentions a temperature snap switch, so it sounds like they have a non-permanent cut-out on thermal overload.

sukuriant• 14 years ago

I'll be interested to see how he's going to deal with the torque problem that Tesla had to solve.

s_henry_paulson• 14 years ago

I'm interested in how he's dealing with even simpler problems like charge time and battery life.

SunboX4• 14 years ago

Me, too. I don´t see any battery cooling system. This will be a problem, if he´s getting it to work. With these big motors, the batteries will get very hot ... and maybe, burn down ... or at least don´t work very long.

pja• 14 years ago

He's using a COTS charging module: you'll see it if you look through the linked thread.

andyjsong2• 14 years ago

I just wondering where he's getting the cash to convert his s2k into an electric drag racer. I wish I had that kind of access to car and batteries as a kid.

nicholassmith2• 14 years ago

It says he runs his own CAD business, and I imagine he's from a fairly cash-rich background.

patrickk• 14 years ago

He also mentioned he's getting some sponsorship in the forum.

atlbeer• 14 years ago

He was 16 when he started the build and was using an AMG Mercedes ($100k car) to pick up parts.

I'm going to assume he comes from a fairly well off family.

Zak7• 14 years ago

Introductory blog post here: http://electrichonda.blogspot.de/2011/05/introduction.html

Juan's project is impressive, no doubt, but his analysis of the superiority of electric cars is suspect. He writes:

The average car uses about 20% of the potential energy of the fuel in useful motion while wasting the other energy as heat, noise and pollution. Electric cars use upwards of 80% of their 'fuel', a percentage which can be increased relatively easily as most of its losses are electrical.

The biggest problem is that he's treating the electricity in the battery as raw fuel. He does acknowledge that most electricity in the US comes from sources like coal, but ignores various losses between that coal and his car flying down the road. Let's add those in.

The best we can do from a coal plant is about 49%[0]. It may be possible to use the waste heat from such a plant for other purposes; I am not including such uses in this calculation as they do not have anything to do with powering the electric car.

The US power grid is around 93-94% efficient[1].

Electric cars don't get all the power from the grid in to the batteries as chemical energy. Charging batteries generates quite a bit of heat. The EPA estimates that the best electric cars are 62% efficient at converting power from the grid in to kinetic energy[2].

So we have 49% * 94% * 62% = 28.6% efficient at converting the chemical energy in coal to propelling the car. This is not a dramatic improvement over internal combustion. There is, of course the advantage of using power sources other than coal and oil, but the claimed efficiency is not quite what electric vehicle proponents would like it to be.

[0] http://en.wikipedia.org/wiki/Aved%C3%B8re_Power_Station

[1] http://en.wikipedia.org/wiki/Electric_power_transmission#Los...

[2] http://www.fueleconomy.gov/feg/evtech.shtml

JoeAltmaier6• 14 years ago

28% is absolutely a dramatic improvement, over 20%. It translates to a dramatic decrease in coal consumed to drive the vehicle - close to a third less.

Zak7• 14 years ago

The EPA says the best internal combustion cars are 26%: http://www.fueleconomy.gov/feg/atv.shtml

_ea1k2• 14 years ago

If you want to include the efficiency of the entire electrical pipeline, then you need to do the same for the gasoline/diesel engine.

How much energy is used for the extraction, refinery, transport, and distribution of gasoline/diesel fuel? I suspect 26% efficiency for gasoline would also be extremely high compared to reality if those costs were factored in.

Retric• 14 years ago

Last time I checked on average when you include extraction, refining, and transportation a higher % of coals energy ends up in the battery's than does Oil's in the gas tank. Initially, oil took little energy to refine etc, but we have started doing things like tar sands and cracking which take a lot more energy than earlier methods. While there is still some easy oil out there, Oil is worth 10x as much as coal vary energy expensive Oil starts to be worth extracting.

PS: If you compare solar cells with Bio fuels it's vary one sided with electric cars far out in the lead.

binarymax• 14 years ago

Splitting hairs now, but coal for the grid also has extraction and delivery costs - probably not equal to that of oil, but if you start from the earth for one you need to start from the earth for the other.

Zak7• 14 years ago

I'm talking about the efficiency of the pipeline starting with a fossil fuel and ending with a car moving down the road. It's also fair to start the comparison with a fossil fuel in the ground, but in that case you also have to start the electric pipeline at a coal mine.

Electric might well win by a significant margin, but it isn't nearly the 85% to 20% claimed.

mtr• 14 years ago

His project inspired me to write a blog post: http://blog.octanenation.com/news/high-school-senior-builds-...

It's a complex undertaking and he will definitely learn more than his classes in high school!

700+ hp electric Honda S2000 built by high school senior

Related Stories