The Iconic 3DBenchy Enters the Public Domain

https://www.nti-group.com/home/information/news/3dbenchy/

by kotaKat • 1 year ago

207 26 1 year ago

Philpax• 1 year ago

Happy to see a positive outcome here! Here's a great video that details the incident that led to this: https://youtu.be/P7BhMKqIkig

devmor• 1 year ago

Zack’s video on this subject was definitely the most clear and informative- definitely needed given the huge spread of misinformation.

lathiat• 1 year ago

It was great. Glad to see the public domain change. Surprisingly sensible outcome.

sitkack2• 1 year ago

It looks to me like Zach's video is the thing that actually fixed it. Good work Zach!

pbronez• 1 year ago

Awesome to see the common sense solution become real

Chernobog• 1 year ago

I love some of the community responses to the initial Benchy madness, such as the 3D Boaty, which is a bench.

https://www.printables.com/model/1141963-3d-boaty

Baeocystin• 1 year ago

Ok, that's hilarious. Thanks for posting it.

MengerSponge• 1 year ago

Shades of /r/trees vs /r/marijuanaenthusiasts

sitkack2• 1 year ago

https://old.reddit.com/r/3Dprinting/comments/1ip7f87/the_ben...

Is pretty stoked

hovden• 1 year ago

The article does not explain how they entered it into the public domain. One cannot just declare something is public domain. Public domain is a special circumstance.

kid64• 1 year ago

That's nonsense, it sounds like you're only familiar with the concept of public domain in the context of copyright expiration.

bityard• 1 year ago

One cannot just declare something is public domain.

Of course you can. Lots of people do this. There are whole websites that collect and distribute public domain photos, music, artwork, etc.

I'm actually very curious now what led you to the line of thinking that it isn't possible?

mananaysiempre• 1 year ago

(Not a lawyer.)

Depends on the jurisdiction—e.g. Germany[1] is known to be particularly problematic. But in this particular case, the model has been released under CC0[2], which has a fallback permissive license alongside its public domain dedication, specifically to avoid this problem. That’s why the CC0 is a thousand words long instead of a couple of sentences. Most sites hosting “public domain” works also use the CC0 or something similar.

[1] https://opensource.stackexchange.com/q/9871

[2] https://creativecommons.org/publicdomain/zero/1.0/legalcode....

cpitman• 1 year ago

Surrendering work to the public domain is actually more complicated. It's easy to make the claim that a work is public domain, but the law may not allow you to actually relinquish all copyright claims. This also depends on which country you are in.

This is why the CC0 license exists, to attempt to provide a more legally sound equivalent to plain public domain (https://creativecommons.org/public-domain/cc0/).

M2Ys4U• 1 year ago

I'm actually very curious now what led you to the line of thinking that it isn't possible?

The public domain is the set of all works in which no copyright subsists. Copyright automatically subsists in a work from its creation until it expires. Copyright is a property right. All property must have an owner.

Therefore a work cannot enter the public domain unless the copyright subsisting in it has expired.

(This is from the perspective of the law of England and Wales, at least. Other jurisdictions have similar legal axioms that produce the same result, though)

dlgeek• 1 year ago

They actually just published it under a CC0 license which has equivalent effect.

octacat• 1 year ago

nice, finally we can get all the remixes safely hosted in eu

Multiplayer• 1 year ago

What’s the current state of the art in 3d printers willing to spend 1k+. Is there an authoritative site for hardware?

t0mas88• 1 year ago

If you're willing to build it yourself the Voron 2.4 is fast and high quality.

For an off the shelf product probably Bambu Lab.

lawn2• 1 year ago

The Voron Trident is also great I think and maybe even a better entry point as it's a little easier to build than the 2.4.

Kirby64• 1 year ago

What, precisely, does a voron 2.4 offer over a Bambu X1C (or, more fairly, a P1P) that is worth the additional price (double a P1P) and the fact you have to assemble it yourself (which takes days)?

I’m all for building something that offers an advantage, but it seems neither cheaper nor offering any better quality (and, if you build it poorly or use a poor quality kit, it’ll have substantially worse quality).

FL410• 1 year ago

Pretty much just go buy a Bambu X1C and be done with it. I've been through a bunch of 3d printers, all of which required constant tinkering and babysitting. The Bambu just works, you click print and it prints, and fast.

There's some drama now around them closing up the ecosystem and locking out third party firmware, etc. but I honestly could care less so long as it stays good at being a printer.

lawn2• 1 year ago

Bambu Labs is usually the recommended one but if the various Youtubers are correct then there are better alternatives today.

I'm hesitant to recommend any because I've only used the VORON Trident but if you search around you're bound to find alternatives.

wongarsu• 1 year ago

If we only consider what you get today, nobody is beating Bambu yet. At least not if you want a printer that doesn't focus on customization and just does the right thing out of the box.

Prusa's Core One could be a better option for print farms because Prusa is great at building printers for that kind of constant abuse. But for everyone else it's just a worse version of the Bambu X1C.

However Bambu has gotten a lot of flak for their recent software changes. They have promised not to do anything evil with the currently released printers and to give customers escape hatches. But they are certainly at a moment where consumer trust is justifiably low, and it will take some time to grow that trust back

bdcravens• 1 year ago

Despite some of the firmware drama, I'd still say the Bambu Lab X1 Carbon is the best printer in that price range.

The Iconic 3DBenchy Enters the Public Domain

Related Stories