Bevy 0.13: ECS-driven game engine built in Rust

https://bevyengine.org/news/bevy-0-13/

by _cart • 2 years ago

137 59 2 years ago

bevyengine.org

_cart8• 2 years ago

Bevy's creator and project lead here. Feel free to ask me anything!

Jamustico• 2 years ago

What did you have for lunch

_cart8• 2 years ago

Haven't eaten yet, but I'm planning on having a lentil / beef / mushroom curry I made earlier.

hasty_pudding2• 2 years ago

This looks like a really cool project!

Is it portable to Browser? Or is that on the roadmap?

_cart8• 2 years ago

Yup we support both WebGL and WebGPU browser deployments via WASM

iknowstuff2• 2 years ago

I gotta ask newbie questions.

Any concrete plans for a GUI editor?

Does stuff like Lumen/Nanite from UE5 have any chance of existing in Bevy?

james71322• 2 years ago

The blog post directly mentions efforts towards a GUI-based editor in the "What's next" section.

We can definitely deliver on global illumination in some way, as shown with the irradiance volume support added in this release, though it may not match Lumen 1:1. Nanite is definitely more involved, but worth investigating.

pcwalton5• 2 years ago

Here are the plans for the editor prototypes: https://github.com/bevyengine/bevy_editor_prototypes/discuss...

As far as Lumen goes, there are a few experimental early-stage projects that add real-time global illumination to Bevy, such as bevy-solari [1]. Most of them rely on hardware raytracing support, as this simplifies a lot of things, and the new baked GI stuff that just shipped in 0.13 is fine for non-RTX. Besides, there's a good chance that hardware raytracing support will be very commonplace by the time any of this reaches production quality.

For Nanite, the closest thing that's being actively worked on is meshlets [2]. These actually are pretty close to ready and likely to land in 0.14 (no guarantees of course). These provide some, but not all, of the benefits of Nanite. LOD features can potentially be layered on top of meshlets in the future to provide a solution to roughly the same set of problems that Nanite solves, with some advantages relative to Nanite and some disadvantages.

[1] https://github.com/jms55/bevy/tree/solari

[2] https://github.com/bevyengine/bevy/pull/10164

mochathoughts2• 2 years ago

In two / three years, where do you see the project?

_cart8• 2 years ago

Core pillars (including WIP things like Scene, UI, Editor, Audio) are in place. Partial or full engine stability (see my "partial stabilization discussion: https://github.com/bevyengine/bevy/discussions/9789). More than a few fully released quality games. More than a few fully released quality non-games / tools (we're already seeing Bevy being used as a foundation for things like CAD software and modeling tools).

mattcanhack• 2 years ago

No question, just want to say thanks! I've had a lot of false starts trying game tutorials but the ones I found for Bevy were really easy to follow. I was working two versions behind and the changelog for Bevy was so well done that I was able to figure out most of what changed. Bevy was also just straightforward to use.

gaganyaan• 2 years ago

Are there any good "end to end" examples that show things like a splash screen, main menu, pause menu, video settings, that sort of thing?

_cart8• 2 years ago

We don't have a "complete" official example of those things, although the "game menu" example has some of that: https://github.com/bevyengine/bevy/blob/main/examples/games/...

I recommend checking out Bevy Jam games (which are pretty much always open source) for more complete / real world examples: https://itch.io/jam/bevy-jam-4

Definitely a bit of a gap in our official learning material. Hopefully we can close it soon!

CrimsonCape• 2 years ago

Any idea why the example image in the OP link appears to be running at sub-optimal framerate?

What is the expected ECS overhead per frame (not including graphics interaction, i.e. code specifically in the ECS model)?

Since an ECS is typically a flattened scene graph, is there still a game loop? Wouldn't be necessary, correct? You only need to respond to the inputs...

_cart8• 2 years ago

That is a size-optimized webp / gif that isn't running at 60 fps. The game is butter smooth in practice: https://twitter.com/jarl_game

_cart8• 2 years ago

I would say that the systems in the ECS _are_ the game loop. The ECS overhead per frame is kind of hard to measure / it depends on the scale of usage. To establish the scale of operations: Random single-entity ECS data accesses are a sparse array lookup to find the table the entity is in, and then an array lookup to find the component in the table. Iterating components in a query is roughly the same as iterating an array / is very cache friendly. Running individual systems is _slightly_ more expensive than a function call. Scheduling systems in parallel does introduce some overhead (which is currently higher than we'd like / we're working on optimizing it), but when you pay that cost you get the benefits of everything running in parallel.

james71322• 2 years ago

There is still a game loop that runs every tick. The engine wouldn't work so well if we only responded to inputs as they come in, event pub-sub style.

As for ECS overhead, I've made it one of my top priorities to eliminate it wherever possible since it underpins the entire engine. We're at the point where most optimizations are saving a few tens or low-hundreds of microseconds per frame in your average game/app (i.e. lowering context switch costs from parallel system execution). If you're pushing below 60 FPS in your app, chances are the performance issues are not coming from the ECS, but some other part of the engine, or the app's own code.

SkiFire13• 2 years ago

Since an ECS is typically a flattened scene graph, is there still a game loop? Wouldn't be necessary, correct? You only need to respond to the inputs...

How do you plan to have stuff moving then? You need to update their position every frame, so...

mrec• 2 years ago

The built-in collection of primitives is already quite sizeable

And yet no teapot! Literally unusable.

vacuity• 2 years ago

I can't help but feel that between events and commands, and especially with all the parallelism, there's no clean, powerful solution to manage all manner of inter-system interactions. Having .before(), .after(), .chain(), different schedules and whatnot is great, but I think there's something lacking in the model to round it all out. Granted, I'm a novice in these matters and I understand that concurrency brings many hard problems. Could you spare your thoughts on the matter? Thanks!

mochathoughts2• 2 years ago

Love the way the Bevy project is moving. In a year or two, this project will be a serious alternative to the current Unity / Unreal / Godot engines. Getting it right first is vital, and I'm glad the team is spending a lot of time perfecting the nitty-gritty details before adding features like UI / Editor / etc.

CooCooCaCha4• 2 years ago

As usual bevy is moving at an impressive pace. Excited for them to break ground on the new scene/ui system

martin-t5• 2 years ago

Honestly, if you wanna see impressive pace, look at Fyrox. It has had scenes and UI for ages.

While bevy is a decent piece of tech, it gets way more hype than it deserves, especially when there are more mature and capable alternatives.

CooCooCaCha4• 2 years ago

Sure if you only care arbout surface level details like "has scenes" and "has a UI system".

pcwalton5• 2 years ago

I wrote the lightmaps, reflection probes, and irradiance volumes support for this release! Bevy has really been a joy to work with, and the community is fantastic.

skybrian• 2 years ago

What’s a gizmo? It seems to be some kind of 3d graphics term, but I didn’t find a good definition.

pcwalton5• 2 years ago

The term is kinda fuzzy and means different things in different engines, but in Bevy it refers to lightweight 3D wireframe overlays that you can use for visual debugging.

martin-t5• 2 years ago

To the uninitiated, bevy is one of Rust's two main game engines, the other being Fyrox.

Bevy, despite being written by an army of contributors is continually behind Fyrox which is developed mostly by one guy. Fyrox not only has an editor and a UI toolkit, both of which bevy devs keep just talking about, it recently also added a UI editor. In addition the author is writing 2 games to dogfood Fyrox.

Yet despite all this, Fyrox gets a fraction of the attention and money. Maybe it's because it uses proven old tech instead of being a resaerch project, maybe it's because the author is russian, maybe because people are afraid of a 3D-first engine, maybe fyrox doesn't focus on promotion enough. Idk, but here i am doing my bit to make the world a tiny bit more fair even if I annoy all the bevy fans who kept posting about bevy on every single fyrox post that wasn't completely downvoted and ignored.

whateveracct• 2 years ago

Yet despite all this, Fyrox gets a fraction of the attention and money.

Heh Bevy sounds like Rust itself. Good PR with money behind it is its no1 cause of adoption.

charlotte-fyi3• 2 years ago

What PR money has been behind Rust?

charlotte-fyi3• 2 years ago

Your conspiratorial framing here strikes me as odd, as well as unnecessarily denigrating Bevy as a "research project." Isn't the answer quite obvious, which is that if someone wants to use an engine built off "proven old tech", they should probably just use one of the major players in the space, and that Bevy's uniqueness/commitment to the ECS model is precisely what causes it to generate more hype and energy? Is this really an issue of "fairness"?

mcjerry3• 2 years ago

Isn't the answer quite obvious, which is that if someone wants to use an engine built off "proven old tech", they should probably just use one of the major players in the space

All of the major engines are written in C++. I've tried Unreal, Unity and Godot. They all have their flaws. With Unreal and Godot those flaws are mainly the scripting languages BP and GDScript which one can get tired of quite easily, especially BP. You can of course use C++ for all your scripting but both engines strongly encourage you to use their scripting solution for a big chunk of your game. (Unity has a bunch of other issues and isn't source available, although C# is fairly pleasant to work with IMO).

There is definitely need for an OOP engine in Rust just as there is need for an ECS engine in Rust.

Deukhoofd• 2 years ago

Looks to me like Fyrox is competing more with Godot or Unity, than it is with Bevy. The cool part about Bevy is its ECS handling. There aren't a lot of ECS-first game engines, and Bevy is one of the few that do exist.

pcwalton5• 2 years ago

Personally, I feel the real competition is the OSS Rust engines against Unity, Unreal, and to some extent Godot, rather than the competition being between Rust engines. Bevy and Fyrox are both great frameworks.

timeon2• 2 years ago

While I think Fyrox is impressive, reading your comment felt like: Sir, This Is A Wendy's

martin-t5• 2 years ago

Good, point, maybe i should have told that to bevy fans doing the same on every fyrox post.

SeanAnderson2• 2 years ago

I've been building My First Game™ using Bevy after teaching myself Rust last year. I feel super cool running Rust in WASM in the browser! It's been a great experience overall and I highly recommend exploring what Bevy has to offer.

The community is really exceptional. I ask questions daily and get helpful responses usually within minutes. Bevy hides some of the complexities of Rust, such as lifetimes, away from normal development. This was a pleasant surprise for someone coming in with little awareness of Rust.

Writing in ECS is pretty confusing to begin with and, IMO, represents the steepest part of the learning curve. After a while ECS starts to feel more natural though and you'll wonder why you were ever comfortable doing OOP.

The main sore spots for me are: UI needs a lot of work to be ergonomic and beautiful, there's a lot of footguns related to performance and event handling/change detection, which do have workarounds, but at the cost of ergonomics, and, specifically for WASM, everything (including rendering) is still single-threaded which makes the app perform worse than well written JavaScript for now.

I'd be happy to try and answer any questions about my experience as a complete noob to Rust/Bevy/ECS/game development and having immersed myself ~full time on a game for the past year.

FYI, you can browse my game's code here: https://github.com/MeoMix/symbiants

mikercampbell2• 2 years ago

Hey!! I’m on the same journey! Yew, but with Bevy ECS and HTML as my “rendering engine”.

Keep me posted!!

valand2• 2 years ago

Never dug deep into Bevy's subcrates, but does this mean you have more control from the JS side? (e.g. when I want to interlace the main loop tick with something from the JS side)

Bevy 0.13: ECS-driven game engine built in Rust

Related Stories