Show HN: MStream – A personal music streaming server

https://github.com/IrosTheBeggar/mStream

by mStreamTeam • 9 years ago

162 64 9 years ago

voltagex_• 9 years ago

What advantages does this have over Plex, mpd and Ampache?

It's easier to setup and manage than other music streaming servers. The latest version of mStream Express doesn't have an dependencies. You can get your server running in 30 seconds since nothing else has to be installed or configured. It also works for Windows, which most servers don't support.

Here's a video of v0.1 of mStream Express being setup in under a minute: https://www.youtube.com/watch?v=IzuxYTaixpU

mumphster• 9 years ago

Can't you do something similar with plex? I don't remember doing much other than using their installer. Good work though, although I don't listen to much non-streaming (spotify) music lately.

mikewhy2• 9 years ago

Does it do any encoding to make sure it can play on the client?

skrowl• 9 years ago

.. or Shoutcast / Icecast / etc that we've had since the late 90s

ePirat• 9 years ago

This is different from what Icecast does. Icecast is for the use case where you have a stream of same content for a large amount of listeners, not a different, user-controllable stream for each listener.

laumars• 9 years ago

I still love Subsonic. Native clients on mobile devices, web client for browsers. Supports DLNA, videos and playlists. Pretty much ticks all of my personal requirements.

The audio streaming service is a pretty crowded market though. You could ask 10 different people to list their preferred solution and get 10 different answers.

exoromeo• 9 years ago

Same. Been using Subsonic for quite a few years now and it works fine for me.

topranks• 9 years ago

Upvote for subsonic here too, great piece of software been using it years very robust.

j_s2• 9 years ago

Lately I have used https://github.com/thedmd/pianobar-windows-binaries for Pandora.

drumttocs8• 9 years ago

Open source Plex alternative? Pretty cool.

kawsper2• 9 years ago

Does anyone know of any software to help keep libraries in sync across devices?

I have an OSX install that syncs to my iPhone, and I have a Linux laptop and want the collection on all 3 devices.

j_s2• 9 years ago

Maybe something like this could help me with my iPhone/iPad(s) offline videos for the kids!

rglullis• 9 years ago

Anything wrong with good ol' rsync?

kawsper2• 9 years ago

That is my current solution, but that only allows for one-way sync from the OSX device to either iPhone or Linux, it could be cool if I could add songs from my Linux device, or the devices could share playlists.

bo1024• 9 years ago

How about using version control software such as git?

JustSomeNobody• 9 years ago

Arguments could certainly be made for using git, but rsync was actually designed for this scenario and is probably much better choice here.

ekianjo2• 9 years ago

Syncthing works fine for me to do just that (I dont have an iPhone however).

PudgePacket• 9 years ago

Also https://github.com/tchaik/tchaik.

neilsimp1• 9 years ago

I have been using Audio Streamer (https://audiostreamer.org/) for this purpose for a few years. It also works on Windows/Linux (and probably Mac, although it's not listed).

This looks a bit snazzier, though. I may have to give it a try.

burnbabyburn• 9 years ago

I still prefer dlna! but yeah, clients around are the equivalent of xmpp in terms of user experience, even if setting up a server is a 2min operation.

jdpigeon• 9 years ago

I'm assuming it could run on a raspberry pi?

Also, any plans to write plugins for Spotify or Google Play back end?

mStreamTeam9• 9 years ago

I'm looking into writing plugins for youtube, spotify, and maybe soundcloud. I've found a bunch of open source projects that do it already so I may fork one of those or see if the author is interested in collaborating.

And yes, it can run on a Raspberry Pi.

Nux• 9 years ago

I think you could hook youtube-dl in to get youtube support (and more).

ekianjo2• 9 years ago

There's also cherrymusic that works fine on RaspberryPi, with a very similar interface, too.

HaoZeke• 9 years ago

So, why isn't it compared to the venerable mpd?

mrmondo• 9 years ago

How well does it handle larger libraries? My collection is around 1.4TB and I've found web apps that use a lot of js tend to lag up in the browser etc....?

mStreamTeam9• 9 years ago

It handles my 250 GB library just fine. I imagine 1.4 TB shouldn't be a problem. The frontend JS was written to be as light as possible so it would scale up easily. If you run into any problems post a bug on the github page and I'll look into it

It will take a while to scan the whole thing for metadata, but mStream handles scanning on a separate thread so you can stream it while that's being done.

chirau• 9 years ago

You have 1.4TB library? That is quite a huge library. How many songs? Are they MP3s or uncompressed? Do you listen to all of it?

cmdrfred• 9 years ago

I have about 2tb of speech (podcasts, audio books, and lectures) so it might include that.

I've listened to nearly all of it.

krick• 9 years ago

Doesn't seem so huge to me. I have about the same size, mixed FLAC & mp3 (I prefer FLAC, but it isn't always available), pretty much all of it I've listened and it even lacks some considerable number of artists/albums I like. This does not include podcasts & audiobooks, I have more of them and I did not listen to all of them yet (I tend to delete audiobooks/podcasts I've listened more often than music, as probability of repeated listening is usually lower).

tracker12• 9 years ago

I'm not familiar with the library, but if you're running on a system with an SSD, it should be more than okay... even then, it shouldn't be too big of a DB for sqlite, unless you are servicing thousands of users.

opticals• 9 years ago

is Flac available?

fomojola2• 9 years ago

Curious: how does this handle NAT (for example, being installed behind multiple routers)? I have my home server connected to a Linksys router that connects to the cable modem: if I installed it on that server how would I connect to it from my phone when I'm not at home?

mStreamTeam9• 9 years ago

You'll have to setup port forwarding. This can be done by logging into your router.

If you don't have access to your router, you can try mStream's auto port forwarding feature. It will use uPNP to try to automatically configure port forwarding

fomojola2• 9 years ago

Ah, I see. Would I also need a dynamic DNS entry (or a static IP address from my ISP)?

jepper• 9 years ago

I'm using Koel: https://github.com/phanan/koel

Great alternative to ampache etc, very slick interface.

The hardest part is keeping music and especially playlists synced between devices, something that can be solved with syncthing or similar software. Playlists are very hard though with offline desktop clients (Musicbee)

mbrumlow• 9 years ago

Hey, they both use the same image for their devices!

stirner2• 9 years ago

I made a similar server a while ago, but it is more minimal and command-line-oriented [1]. The only client so far is a fairly minimal browser client, but it is functional. It supports any container/codec that libav supports, and allows either MP3 or Ogg Opus as streaming formats. Songs are dynamically transcoded to the streaming format when they are requested. This means you can have a library of heterogeneous, potentially streaming-unfriendly formats, and not have to worry about the streaming codec du jour or transcode your entire library when you want to use a new codec.

I want to do more work on the server, but I've been busy working on an audio format library in Rust to support the transcoding. Right now, the best option is to either exec() the ffmpeg command line tool, which is easy but has overhead and makes distribution more difficult, or use the libav* C libraries, which are quite complex and in my experience poorly documented. I've decided the best option is to make a cleaner, more minimal audio library that wraps reference encoder/decoder libraries.

How does mStream handle transcoding, if at all?

[1] https://github.com/wwalexander/river

mStreamTeam9• 9 years ago

mStream doesn't do any transcoding. Instead I've focused on support for all common file formats. The webapp includes a fallback to Aurora JS if the the browser doesn't support the filetype. Typically this is only needed for FLAC but recently Firefox and Chrome have added FLAC streaming

stirner2• 9 years ago

Thanks for the info. The main reason I transcode the streams before transmitting is for size, not compatibility. There are a lot of situations where you really, really don't want to stream a 20 MB FLAC file. Lossy codecs like Opus at 128-192 kbps or MP3 V3/V4 can achieve transparency at a much smaller size, which is vital if you have a slower or metered connection.

voicedYoda• 9 years ago

Runnable on a Drobo?

yownie• 9 years ago

what no edna love? https://github.com/res0nat0r/edna

Siecje• 9 years ago

Does the music play out of the clients or the server?

Is this used to control/queue music on a media server or will it play out of my phone?

mStreamTeam9• 9 years ago

The music plays from the clients.

The server hosts your files and has JSON based API to search through music. The server comes with SQLite built in and a webapp to stream on any device with a browser

NeuroWinter• 9 years ago

You an ex What.CD member?

ziikutv• 9 years ago

When I visit the page from my iPhone it does not play the song.

unhammer• 9 years ago

What are the advantages over e.g. Subsonic? ( http://www.subsonic.org/pages/index.jsp – there are some popular forks like http://beta.madsonic.org/pages/index.jsp and https://github.com/Mach5/supersonic )

gokulnathm• 9 years ago

Just a thought - What if we create a radio hub (something like Shoutcast) pointing to streaming servers like mstream hosted by indie artists and others. Those who want their collection to be heard by the public can register at the hub. User management, analytics etc can be handled at the hub.

Show HN: MStream – A personal music streaming server

Related Stories