Rolls-Royce’s single-crystal turbine blade casting foundry

https://www.theengineer.co.uk/issues/june-2015-online/jewel-in-the-crown-rolls-royces-single-crystal-turbine-blade-casting-foundry/

by pcl • 10 years ago

339 73 10 years ago

theengineer.co.uk

Justin_K• 10 years ago

There is a cool How It's Made on these parts. Not sure if it's RR, but it shows the complexity: https://www.youtube.com/watch?v=Qh9nvoRicKc

jtchang• 10 years ago

It shows a box at the end with the GE logo. Crazy how precise the manufacturing is.

cnvogel• 10 years ago

Here's a recommendation if you are interested in understanding the basics of turbine engines:

https://www.youtube.com/user/AgentJayZ

This guy, calling himself AgentJayZ, is a technician (not a designer) working on mostly older industrial and military jet engines, and he's showing a lot of the innards, and explaining a lot of the basics of operation of turbine engines. Also: Loads, and loads of footage of running engines in test-stands, which of course gets boring over time...

gertlex• 10 years ago

This was a super fun read, and it felt nice to take the time to carefully read it to understand the very complex processes it was describing.

That said, can someone explain how the pigtail accomplishes the following?:

"The crystals grow in a straight line in the direction that the mould is being withdrawn, but because of the pigtail’s twisted shape, all but the fastest-growing crystals are eliminated."

hcrisp• 10 years ago

By the principle of elimination by bottleneck. As the crystals grow into the pigtail, the lagging crystals hit the already-formed leading ones or the mold surface, leaving a primary, single crystal grain to exit the pigtail and grow across the blade proper. This would be almost impossible to happen without the pigtail because multiple crystal grains would grow in parallel across the blade.

Animats2• 10 years ago

Here's a technical explanation.[1] But here's an example of triggering crystal formation in a supersaturated solution.[2] Classic high school chemistry experiment. Dropping a solid crystal into the supersaturated solution causes the whole liquid to turn into a solid in seconds.

That's the basis of single-crystal casting. The solidification process relies on operating very close to the melting point of the material. The idea is to create an alloy mixture that's ready to crystallize, then starting the process by dropping in a crystal and letting the liquid crystallize in a very controlled way. The heated zone is moved through the liquid, as in zone refining (or the solid is pulled from the heated zone, or gas cooling is used) so that the crystal growth takes place in only a narrow layer.

This is decades old, and one of the reasons jet engines last a long time now.

[1] http://www.asminternational.org/documents/10192/6019788/amp1... [2]

bobsil1• 10 years ago

How does this compare with pulling a silicon boule? Any chip people care to chime in?

Cerium• 10 years ago

A helix functions as a grain selector. I think that only the crystal with axial alignment is fastest in general at propagating through a spiral.

Animation of the effect: https://www.youtube.com/watch?v=br9iaeYYxSM

Paper on the development of single crystal casting: http://www.tms.org/superalloys/10.7449/2008/Superalloys_2008...

akamaka3• 10 years ago

I don't fully understand the process, but this paper has an explanation and diagrams: http://www.journalamme.org/papers_vol32_1/32110.pdf

sspyder• 10 years ago

Not to take away from the engineering marvel that these parts and process represent, but the timing of this article is interesting - seems PR related. I recently read about problems ANA faced with Rolls Royce engines, specifically the turbine blades failing. There have been at least 3 incidents of engine failure, flights have been cancelled an all 787 engines have to be retrofitted with new blades.

http://www.reuters.com/article/us-ana-rolls-royce-hldg-boein...

http://www.bloomberg.com/news/articles/2016-09-05/ana-said-t...

pcl2• 10 years ago

The article was published a year ago; I came across it because I got curious about single-crystal turbines after seeing them mentioned in the comments about the AN-225 story posted earlier today.

johansch• 10 years ago

Also don't forget the A380 RR disaster-that-was-prevented-by-sheer-luck.

dredmorbius3• 10 years ago

???

ubernostrum2• 10 years ago

the timing of this article is interesting

Earlier today a story about China buying the AN-225 was on the front page and lots of people were confused about why they needed to buy the full toolchain for manufacturing it, instead of just buying one plane and reverse-engineering how to build it.

Several people then pointed out the difficulty of manufacturing modern engine components, particularly the blades, and it was kind of inevitable an article about that would follow soon after.

Also, ANA's 787s are a bit of a weird case in that ANA puts far more cycles on those engines than a typical operator. Most 787 operators use them for long-haul flights, 8-12 hours airborne at a time and only one or two flights per 24-hour period. ANA, on the other hand, flies 787s on much shorter domestic routes, meaning more cycles of spin-up/shut-down. Given that ANA was the first operator and puts way more stress on the engine than anyone else, it's unsurprising that they would see accelerated wear.

byebyetech• 10 years ago

This is the best documentary on how RR makes the jet engine and the blades. 1 hour long but once you click it, it would be hard to stop!

https://youtu.be/VfomloUg2Gw

yread• 10 years ago

I agree also wanted to post it when I saw the article. Absolutely mesmerizing to watch.

akamaka3• 10 years ago

If you liked that documentary, you might love this older one, which features Stanley Hooker. It's amazing to get the perspective of the legendary engineer himself, and it goes much more in depth into the technical problems and business challenges.

https://www.youtube.com/watch?v=by4lH2whhjk

teh_klev2• 10 years ago

Haven't seen that before, hugely enjoyable and entertaining.

yoodenvranx• 10 years ago

I did not know that the fan blades are hollow nowadays! The way they are made is pretty mindblowing, thx for posting that link.

teh_klev2• 10 years ago

I've watched that a few times, never gets boring.

Splendor• 10 years ago

If you want to skip to the bit about the turbine blades: https://www.youtube.com/watch?v=VfomloUg2Gw&feature=youtu.be...

afterburner• 10 years ago

Slightly nicer version:

https://www.youtube.com/watch?v=HWgDre-mSX4

ubernostrum2• 10 years ago

Another favorite aviation-related one, though more pop-sci-oriented, is this look at a 747 going through a D ("heavy maintenance") check that basically takes most of the plane apart and puts it back together, covering all the bits and how they need to work:

https://www.youtube.com/watch?v=x_yHtfGH0nI

filereaper• 10 years ago

On this topic, I'd like to ask how 3D printed parts fair in the new engines being built. [1]

I'd love to hear about this from a Metallurgical Engineer or a Material Science Expert.

[1] http://qz.com/667477/ge-fires-up-worlds-largest-commercial-j...

phasetransition2• 10 years ago

My graduate research was on a corner of the class of ceramic materials that are used as coatings on top of this type of turbine blades. Anything specifically you would like to know?

Generally, single crystal blades are designed for their resistance to creep at high temperatures. If your predominate creep mechanism is sliding at grain boundaries in a polycrystalline material, you can impart creep resistance by removing the grain boundaries. A single crystal is the limiting case of this process.

3D printed parts, so far, are polycrystalline, and would be used in other places in an engine's hot stage.

Happy to address specifics.

pcl2• 10 years ago

What sorts of considerations are important for the ceramic coating? I'd assume that the coating is not under the same types of stress as the alloy core, and so thermal properties would be more important. Is that true, or is load as much of a factor there too?

yiyus• 10 years ago

I can see how 3D printing can be used for parts with complex shapes, as a replacement for powder sintering, but there is no way you can use it to cast a single crystal, neither for any part where you need to control texture.

rsfern• 10 years ago

Perhaps late to the thread, but turbine blades with internal cooling channels are one of the dream applications for metal additive manufacturing, though I'm not sure it may ever be realizable. If you could lower the operating temperature of the turbine blade in this way, you might be able to mitigate the risk of creep, which as sibling posters point out is the motivation for the use of single-crystal turbine blades and thermal barrier coatings.

There's a lot of buzz in the materials community around additive, but I think 3D-printed turbine blades are basically just a dream right now. People are still wrestling with getting consistent build quality for simple structural components...

rayiner• 10 years ago

For context: https://upload.wikimedia.org/wikipedia/commons/thumb/7/75/Tu....

The blade in the first picture would sit in the high-pressure turbine, just behind the combustion chamber. Note that the flow path of a jet engine corresponds directly to the pressure-temperature transitions of the Brayton cycle, which governs the operation of gas turbines: https://www.grc.nasa.gov/www/k-12/airplane/Images/braytonts.....

If you're wondering why Rolls Royce goes to so much trouble to build turbine blades that can handle high temperatures, see: http://web.mit.edu/16.unified/www/SPRING/propulsion/notes/no....

Also note that difference in size between the XWB's fan in the second picture (of the article) and the turbine blade in the first picture. The XWB is a high-bypass-ratio turbofan, which means almost all the air taken in by the 3-meter-diameter fan bypasses the core of the engine, generating thrust at low exit velocity. Only about 1/10th the air goes through the core of the engine. There, it is compressed, so by the time you get to the HPT, the flow path is quite narrow. As the turbine section removes energy from the hot air, it cools and expands, and the flow path gets wider.

orf2• 10 years ago

I had the chance recently to see the Mayor of the City of London's (the strange city-within-a-city bit of London) two Rolls Royce's they keep for formal occasions up close. They are super rare (only ~400 ever made), worth a whole lot of money and looked amazing.

I'm not a car person but you can't help but feel a shiver when you see a car like that. The engines where the same as the ones they used in the Spitfire fighter planes during WW2 (6.5 liter v8!), full white leather interior, a retractable partition between the passengers and the chauffeur.

I know this isn't strictly about the article but I thought I would share anyway. Rolls is one of the things that makes me proud to be British.

Here's a picture: http://c8.alamy.com/comp/C1ETKT/city-of-london-lord-mayors-o...

Edit: It's a Phantom VI - https://en.wikipedia.org/wiki/Rolls-Royce_Phantom_VI, and the first article on Google is unfortunately this: http://www.dailymail.co.uk/news/article-1165522/Lord-Mayor-L...

daemoncoder• 10 years ago

Spitfires used v12's, not V8's.

orf2• 10 years ago

Ahh, shame, you're right. They where 27 litre as well! That would be a bit extreme. Seems someone was silly enough to put it in a car though: https://www.youtube.com/watch?v=u43pWEwI6xY

Blackthorn• 10 years ago

Didn't those engines require 150 octane fuel as well? Tough to find that nowadays.

caf2• 10 years ago

That's also the car the Governor-General of Australia uses on formal occasions.

spitfire• 10 years ago

6.75 Litre V8. or as they said "Six and three quarters".

megablast• 10 years ago

Just looks like another car to me, but I am not a car person.

calpaterson• 10 years ago

On jury service at the Old Bailey by any chance?

Angostura• 10 years ago

I think you mean proud to be German ()the car making arm was purchased)

Rolls is one of the things that makes me proud to be British.

akamaka3• 10 years ago

This technical paper has many pictures of the wax moulds and more details of how the process works: http://www.journalamme.org/papers_vol32_1/32110.pdf

porsupah• 10 years ago

Animagraffs has a very good set of animated cutaways explaining how turbofan and turbojet engines work:

http://animagraffs.com/inside-a-jet-engine/

patcheudor• 10 years ago

Look, I don't know what they are doing in UK facilkity's but I say leave those kittens alone!

From the article: "Steve Pykett, Manufacuring manager, Rolls-Royce Advanced Blade Casting Facilkity"

fitzwatermellow• 10 years ago

Fantastic read! Now why can't all technical and scientific journalism hold itself to this standard? Instead of making the prevailing assumption that your average reader has the I.Q. of a parsnip and the scientific literacy of a kindergartener ;)

Have always felt single-crystal foundaries could be a great driver for building low Earth orbit microgravity factories. There has been extensive research in the labs on ISS dedicated to making highly spherical ball bearings, long macromolecular protein crystals and extreme density refractory metal composites. But is anyone contemplating large scale commercial production? With the cost of delivery dropping, it seems like it might be a idea worth re-considering!

DigitalJack• 10 years ago

Regarding your first paragraph, I'm sure it has a lot to do with the journalist.

cheeseprocedure• 10 years ago

"The Engineer" is a trade publication, so its writers have a very different target to hit than, say, those of a daily paper.

vlehto4• 10 years ago

How do you benefit form zero gravity in casting?

Gravityloss• 10 years ago

And to think all this technology is used mostly for cheap holiday flights.

Samathy• 10 years ago

And power multiple countries military aircraft fleets, as well a fair few commercial and military vessels.

caf2• 10 years ago

Well, without that mass market of holidaymakers we wouldn't be able to afford to use the technology for more highbrow purposes like attending scientific conferences.

doctorstupid• 10 years ago

The high-pressure turbine is, in more ways than one, one of the the highly optimised inner-loops of the modern world.

dredmorbius3• 10 years ago

Care to expand on that analogy?

cyberferret• 10 years ago

Always clearly remember when I was studying for my commercial pilot licence many years ago. In one class, an engineer took us for a tour of an airline hangar. He stopped in front of an engine on a rig and explained that EACH blade on the intake fan stage cost something like $40,000. That was about 4 times the price of the car I drove to that class!

userbinator• 10 years ago

In aviation, everything is extremely expensive due to the quality level required.

M_Grey• 10 years ago

It's really incredible to imagine blazing hot combustion products, and these blades surviving in that environment for any length of time. Now I feel as though I have a bit of a better understanding of how that comes to pass.

wbrocklebank• 10 years ago

One other surprising thing about turbofans is that the majority of their thrust is produced by the huge main fans (the blades which are visible as you stand and look at the front of the engine) simply dragging the aircraft through the air as with a turbo-prop (or boat prop). The ultra-high pressure compression and burning stage (being discussed here) produces only 30-45% of direct thrust but clearly powers the spinning of the large components.

My father-in-law started at RR as a graduate trainee and left 40+ years later as its' longest serving member of staff, CEO and Chairman. he took me on tours of these plants when I first met my wife which was an unbelievable treat.

vlehto4• 10 years ago

I'd like to note few things: single crystal is the best way to fight creep, but that's it. This is very specific problem with very specific solution. For most engineering problems you would prefer high fatigue strength or high ductility. Single crystal is poor for both.

Another thing is that single crystal metal is very distinct from amorphous metal. Neither has grain boundaries, but single crystal is very strictly ordered structure while amorphic is completely disorganized. As a result, single crystal tolerates high temperatures extremely well, while amorphic is worse than regular metals.

Both are distinct from powder metallurgy. Which in turn has very high amount of grain boundaries.

Interesting thing here is that in regular steel, the grains are single crystals while the boundaries are often amorphic. So in a way you have "composite" material. (It's not technically composite, because both substances have same elements in same proportions.)

castratikron2• 10 years ago

Thanks for this. I'd think a metal would fracture very easily if there existed a well defined boundary inside, which is what a crystal is. Seems like a property you wouldn't want inside of a jet engine, but what do I know.

vlehto4• 10 years ago

When we talk crystals in material science it just means that the atoms are organized. There are relatively few common structures.

https://media1.britannica.com/eb-media/37/1537-004-7657F6AC....

"Grain" refers to crystal that internally has that crystal structure, but externally has whatever shape it just happens to have. Grain and crystal are almost synonyms. Regular steel has grains inside, which then have atoms inside organized in crystalline way. In between the grains are "grain boundaries" which are not organized in any way. Different grains have different directions.

If a crack starts to grow through steel, it first needs to penetrate a crystal. It can go "easy" by following some plane that doesn't have any atoms laying on it. Then it needs to go through amorphic (=disordered) boundary region, but now the crack can't go easy. The next grain extremely is unlikely to have nice plane continuing right after the first one. In practice the crack will have to follow winding path and this long path will consume more energy than short one.

Here is image of steel grain structure. The white are grains, the black are amorphic boundary regions.

http://www.scielo.br/img/revistas/jbsmse/v33n2/a13fig01.jpg

Practically making grain size smaller is one of the best ways to resist crack growth (=fatigue strength). Other possibilities is to have different sized atoms in the crystals, so there are no perfectly straight planes for the crack to grow. And it's also possible to several different crystal structures in different crystals. But also different structures inside single crystal.

Here is "pearlite" microscopic image. The black stripes are one crystalline structure and the white ones are another. But they are well aligned and therefore don't require any disorganized boundary when they are side by side.

http://www.eng.utah.edu/~lzang/images/pearlite.jpg

Sometimes you get bullshit like excessive boundary precipitation. Like in some stainless steels in certain heat treatments, the chromium relocates to the grain boundaries. This leaves the base metal chromium free and makes it soft. And also the grain boundary becomes lot more distinct entity. Now the crack can easily travel along the boundary layer, as the pure chromium boundary is not that well attached to the steel grains.

Also normal cast iron suffers from carbon flakes that are easy crack propagating mediums. Metals attach to metals nicely, but carbon is not metallic, so it's automatic weak spot. Broken cast iron can have almost black cracking surfaces. For this reason guys invented "nodular cast iron". The carbon makes little balls inside the iron, so it offers very little ways for cracks. It has almost as good mechanical properties as steel, but is lot easier to cast.

TL;DR Grain boundary is usually not distinct surface inside the material. It's just where one way to organize atoms shifts into another way to organize atoms. But it's still continuous solid.

pif2• 10 years ago

Let me nitpick just a bit:

the Riace Bronzes of Greek warriors found in the sea off Sicily

Well, Riace is in Calabria, not in Sicily. If you want to insert a nice quote in your article, how difficult and time consuming can be to check on the internet it in 2016?

samdoidge2• 10 years ago

Unnecessary nitpick. The sea is between Calabria and Sicily.

pif2• 10 years ago

Ehm, no, not really!

https://www.google.it/maps/place/89040+Riace+Marina+RC/@38.8...

Same question for you as for the author: how long would have it taken to check?

justinclift• 10 years ago

For the curious, it's completely possible to buy used Rolls Royce turbine blades on eBay. eg:

• http://www.ebay.com/itm/331908581051

Off topic side note - seems like someone's buying them, mounting them + spray painting them at large markup:

• http://www.ebay.com/itm/122000006766

;)

Rolls-Royce’s single-crystal turbine blade casting foundry

Related Stories