HN user
Reading between the lines, this is corporate-speak for "this is a terminable offense for the employees involved." It's a holiday weekend in the US so they may need to wait for office staff to return to begin the process.
This is a US holiday weekend and lots of people are going to be on weekend vacations. Check back on Wednesday.
Right, textiles are much bigger than fashion - bedding, furniture upholstery, curtains, some types of shelter, practical items like footwear, protective equipment, medical equipment and dressings, vehicle interiors... pretty much all aspects of human life depend on textiles. It ain't just cheap t shirts and dresses.
And in pre-industrial societies, peasants (almost entirely women, ranging from children to the elderly) commonly spent around 100 hours of labor to produce a single square yard of fabric to clothe their families (fabric was too expensive for peasants to buy, so most spun it at home).
So yeah, considering how necessary fabric is to human life, that isn't a terribly surprising figure.
Citation for the 100-ish hours: https://acoup.blog/2025/09/26/collections-life-work-death-an...
Great software still exists, in spaces where capital doesn't choose the priorities. We're rapidly reaching the point where almost every piece of desktop software most people actually need to create things has a competitive free-as-in-beer or even free-as-in-speech option.
The only usable part a plastic 3D printer will make for you is the receiver
this hasn't been true for like 5 years now
On our project, it's still useless because it can't use the semantic search in the IDE.
Zed's ACP seems to be a good solution to this - when using it, claude code has access to the IDE's diagnostics and tools, just like the human operator. https://zed.dev/acp
I knew someone who was involved in an investigation (the company and person was the victim not the target of the investigation), their work laptop got placed into a legal hold, the investigators had access to all of their files and they weren't allowed delete to anything (even junk emails) for several years.
You don't get to say no to these things.
because you still can't get the other parts that aren't printed
Every part except the firing pin is now printable (you can print quite strong carbon-fiber reinforced parts at home). The firing pin can be made from a nail or similar piece of metal.
You can't get bullets
Bullets are mostly easy enough to make. One of my neighbors growing up was a competitive shooter who competed nationally and internationally. He manufactured his own ammo in his home shop, using tools any boomer dad had access to, like a lathe, presses and very accurate scales. He didn't really pay any more for ammo than we did per round. The only reason criminals don't do it is because buying factory ammo on the gray and black market is so easy.
The most difficult part to make would probably be the primers, but that still isn't difficult for any chemist.
Here's a (old) video of someone in Europe making their own ammo at home: https://www.youtube.com/watch?v=J5Cx4idIIe0
Get grass roots support for it.
You know that line from the Mandalorian, "Weapons are part of my religion"?
That is true in the most literal possible sense for a large portion of Americans. And not all of them right-wing, either- if anything, the past 5 years have convinced many of my left-wing friends to get concealed weapons training and being carrying pistols.
Guns can be made out of simple geometric shapes like tubes, blocks, and simple machines like levers and springs. There is mathematically no way to distinguish a gun part from a part used in home plumbing - in fact you can go to the plumbing section of your local hardware store and buy everything you need to build a fully functional shotgun.
I haven't printed a full firearm but I've printed some replacement/ergonomic parts for my legally purchased firearms. And there are people printing guns - you don't hear about it because they keep their mouth shut about it.
I use Wipr 2. You throw $5 at the dev and you never have ads on any iOS device again.
Maybe that makes sense for a single-machine application where you also control the hardware. But for a networked/distributed system, or software that runs on the user's hardware, the action might involve a decision tree, and a log line is a poor way to convey that. We use instrumentation, alerting and runbooks for that instead, with the runbooks linking into a hyperlinked set of articles.
My 3D printer will try to walk you through basic fixes with pictures on the device's LCD panel, but for some errors it will display a QR code to their wiki which goes into a technical troubleshooting guide with complex instructions and tutorial videos.
Yes, it's very common when dealing with smaller businesses that don't have great legal compliance to get a court order forcing production of documents
I take it you are unfamiliar with the legal process of "discovery" https://en.wikipedia.org/wiki/Discovery_(law)
No, it's like a nightclub, except full of anime characters and furries and other wacky avatars. Look it up on youtube.
Most of the time my time spend operating my A1 Mini is... maybe 2-3 minutes per plate? Drag and drop into Bambu Studio, run the slicer, send the job to the printer, come back in 4 hours and grab my prints. I might need to break off the supports and clean them up - but with an injection molded kit I'd be snipping the sprues, cleaning up mold lines with a knife and gluing the models together anyway.
The commericial overhead rate for an SLA printer is about $5 a plate - the washing and curing steps can be largely automated, or even if they are done manually, it's not that much work.
My experience is that a lot of dads are getting into these hobby at around the same time their kids are also the age for it. It's something to spend time with the family, as well as multiple families to do together.
This site isn't about Warhammer, that's an entirely separate hobby. Warhammer figures are much larger (around 1:56, but the characters are mostly superhumans and monsters, so in practice the figures are much larger) and there's more emphasis on stuff like painting and competitive play than diorama or realism.
Also great for casual players, or printing basic models to playtest with before committing to purchasing a higher quality model or print.
I can easily find 4kg for $40-45 online, or if I am patient I can grab 1kg for $10-12 on sale.
You may be looking at more advanced materials like carbon fiber or fiberglass reinforced filament for printing larger parts that take a load/stress.
Yeah a lot of my friends legitimately enjoy the art of making or modifying models in Blender, and the science of testing different print profiles, materials and processes.
Most people I know buy STL files from MyMiniFactory because the cost of the STLs is already a tiny fraction of the price of buying models at the local store. We spend more on the paint to paint the figures than we do on the digital files. We also like supporting the artists - they often have cheap subscription based models where you get access new files, plus their back catalog if you stay subscribed for a certain period of time or at certain tiers.
Often the artists are solo artists that you can, like, hang out with on Discord and chat directly with.
The exception might be Russia, there's a big 40K hobby there and they're cut off from buying stuff due to sanctions and the terrible state of the economy.
0.10 per figure is a order of magnitude+ overestimate. The paint will cost significantly more than the plastic.
At 22mm scale the cost of filament is basically negligible (literally pennies), but yes, you would have to either buy STL files or make them yourself in Blender.
An A1 Mini requires a smaller nozzle, a customized profile, specific filament, and quite a bit of work in Blender and the slicer to successfully print 32mm figures (approx. 1/56 scale). Even those larger figures aren't anywhere as good as the quality of injection molding you get from a Games Workshop, Archon Studio, Wargames Atlantic or Bandai kit. You typically need an SLA printer for that - which requires PPE and ventilation due to the hazardous materials.
I don't think my A1 Mini would have success trying to print at 1/72 at the same detail as an injection molding process. I've done 28mm figures on it, but it was a lot of work and had a high failure rate.
more info: https://www.youtube.com/watch?v=R7pBUk8AvJ8, https://www.youtube.com/watch?v=ldkW5nXRXN4