olex

Some companies only get to a "hello world" level with a new kind of tech via a 50k per head training. The organizations are setup in a way that people can't experiment or learn by themselves, it's really the only way.

The Fastmail client is good when it's up and running, but not as good as well-implemented native apps. The initial startup is much slower, and the iOS / iPadOS app (which is the same webapp iirc) is pretty bug-ridden, with the webview freezing or app not progressing past the loading animation without a close swipe / reopen.

The calibration is a 10 minute drive on any marked road though, not the precise positioned target stuff that others use.

Do I understand the voting / results wrong? Looking at this: https://howtheyvote.eu/votes/189270

The measure voted on is "Extension [of Chat Control 1.0]", it was voted 36% "for" and 49% "against" (so result is "against"), and looking at "Political groups", majority of EPP MEPs voted "against" (137 out of 164 votes).

It's already called "Extension of the temporary derogation from the ePrivacy Directive to combat online child sexual abuse".

German MEPs voted overwhelmingly against the extension: https://howtheyvote.eu/votes/189270 ("Countries" tab).

Apparently you get unlimited data capped at 500 kbit/s. So that would be a clear "yes".

I don't have a specific source, no. I think it was mentioned in one of their presentation a few years back, that they use various techniques for "ground truth" for vision training, among those was time series (depth change over time should be continuous etc) and iirc also "external" sources for depth data, like LiDAR. And their validation cars equipped with LiDAR towers are definitely being seen everywhere they are rolling out their Robotaxi services.

That's exactly what Tesla is doing with their validation vehicles, the ones with Lidar towers on top. They establish the "ground truth" from Lidar and use that to train and/or test the vision model. Presumably more "test", since they've most often been seen in Robotaxi service expansion areas shortly before fleet deployment.

They've acknowledged an issue now on the status page. For me at least, it's completely down, package installation straight up doesn't work. Thankfully current work project uses a pull-through mirror that allows us to continue working.

I realize that if the authorities target me specifically, there's not much I can do. Even though I am not in the States and do not expect my local police to be quite as... forceful.

However, I do not intend to make it easy to just grab my footage along with any other that can be found, without at least asking.

Absolutely, I will be running PoE wherever possible, definitely for the doorbell. Not just because of Amazon drivers, I've read reports of burglars using WiFi jammers to make sure wireless cameras are useless during a break-in.

Yeah, this is my idea as well. Good to know that the Reolink app still works locally and via Wireguard, that means I'll have less UI to set up in HomeAssistant.

Initially I believe so, but they can then be isolated via VLAN / firewall rules and cut off from internet access.

And this is why my setup will be using Reolink cameras integrated locally via HomeAssistant and Frigate. Detection runs locally on cameras and/or in Frigate, HA manages events and UI, and the only way to access any of it remotely is via VPN, no "cloud" anything.

If the authorities come knocking with a warrant, or frankly, even a nicely-worded sensible request, sure, have at it. But ain't nobody accessing the footage unnoticed and without my approval.

I use NetNewsWire as a frontend, and self-hosted FreshRSS as backend for sync and feed management. Works a treat across multiple devices, Mac/iOS/iPadOS and web.

There is a bunch of videos on Youtube on Zipline, some of them from the company itself (this one showing specifically the "platform": https://www.youtube.com/watch?v=airEzThGlx8), and some from various tech people looking into the whole thing (like Markus Brownlee: https://www.youtube.com/watch?v=88yQTzlmsiA). Probably a better overall source of into than their website.

Zipline drones fly quite high, and instead of descending and landing to deliver their payload, they hover at altitude and lower a "delivery pod" down on a wire. The pod also has maneuvering capabilities, but all of its thrusters are fully enclosed, and it's designed to not cause any damage even it if collides with something during descent or ascent. Overall, a very clever design that should be safer, create no noise on ground level, and be able to deliver into much smaller and more confined landing zones.

RTO may work as long as your teams are geographically co-located and return to the same office. In my experience, a lot of teams in recent years have been staffed without this aspect in mind, because with remote it made no difference. So now, even with RTO people still have to constantly sit in remote meetings / work rooms with the rest of the team in other office(s), and the benefit of in-person collaboration is still lost. Arguably, this "remote between offices" mode is the worst of them all, because remoting in from the office almost always results in an inferior experience compared to remoting in from a well-tuned home setup.

This is a thing I've been constantly bringing up with our company. I _do_ think that local collaboration in the office is vastly more effective than remotely, _but_ only given that the entire team is co-located.

As soon as there are any remote members involved, the local collaboration benefits are lost, and a mixed team becomes less effective than a fully-remote one - because few offices offer the necessary space and equipment for large groups of people to participate in remote / hybrid meetings and work groups effectively (most / almost all existing conference room equipment is complete junk). Unfortunately, fully co-located teams appear to be a thing of the past, and as you say, mandates aren't going to help here.

Pretty nice. How does it handle multiple displays? I've set it up with local Ollama, and it seems to only record and analyze one of my two secondary displays. It would be ideal if I can select which one is used if the recording is limited to a single display, or even better if it can record and analyze the entire multi-monitor desktop surface.

edit Nvm, it seems it always records the display that is currently in focus. That is probably the better way to handle it, since it automatically solves the "ignore what's shown but not interacted with on secondary displays" problem.

Yes, and the XS was the follow-up to the previous X and thus also the "Pro" model, before they were explicitly named as such. So my move that year was indeed a downgrade. Now I'm kind of worried of doing the same thing again - but spec-wise, the base 17 is really not at all a downgrade from my current 15 Pro, apart from the camera department.

I never liked titanium very much, but it's better than aluminum for sure. Now back when they did stainless, that I thought was awesome and looked and felt way more premium.

I get a new iPhone as a work phone bi-yearly, and get to pick the model, with co-pay for anything above the most basic one (currently 16E). In a month or so, it'll be that time again.

Last time I went with the non-Pro option was 6 years ago with the 11. Back then I regretted it, it was a clear downgrade from my previous iPhone X (which I consider the first "Pro" iPhone) - largely because of the screen, 11's LCD really wasn'g great after the X's AMOLED. Since then, I've had the 13 Pro and 15 Pro, both have been great, even though both are a bit weak in the battery department. Now I'm again considering the base 17.

Not interested in the Air or the 17 Pro Max, and the 17 Pro doesn't really seem like it's worth the extra cost to me, since the base model seems really good this time around. At a glance, the things you get with the 17 Pro for extra 350€ (German pricing) are:

- Unibody, but same aluminum material

- Same size, same _exact_ screen (all specs match)

- A19 Pro chip vs A19 - relevant for gaming (I don't) or other highly intensive applications (video editing I guess? again, not something I do a lot of)

- Better camera system - arguably the only relevant thing for a daily driver here

- LiDAR - very limited usefulness, in my experience having it on the 15 Pro

- USB 3 with 10 Gbit speeds vs USB 2 speeds on the USB-C port - relevant if you transfer large files like ProRes video, for me it's basically only when doing local backups to the Mac to install iOS betas, so largely irrelevant

- 31 hours battery life vs 30 - marginal difference

- Same charging, connectivity, everything else really

Will likely end up visiting an Apple Store to fiddle with both options, and look at the co-pay prices that our company will offer, then decide. But so far, it's much less of a clear Pro choice than it was in the previous years.

If someone has a legitimate need, they will look for a solution in appropriate locations (directories, search, magazines, what have you) and do not need someone to scream their marketing blurbs into the void in hopes of being noticed.

I've been researching options for a new ground-up home network setup in a new house, and so far UniFi stuff is on top of my list. FTTH company will install their stuff up to an NT in the basement, and from there it'd be my setup - a UCG Ultra gateway, couple of PoE switches across the main house and outbuilding, and 2-3 Wifi 7 APs sprinkled around.

From all I've been looking at, looks like it's the most straightforward setup. Fully centrally managed via the gateway, leaves me plenty of options for PoE-powered security cameras and other expansions in the future, can be upgraded on a component basis when desired, and integrates nicely in HomeAssistant. And with all that, not even really more expensive than what seems like much more fiddly alternatives like the TPLink Omada system and others.

https://news.ycombinator.com/item?id=44491071

+1 for Claude Code. I'm in the exact same boat - several personal projects with something of a backlog in each, that would've taken me maybe a weekend each to get done manually. Sat down with Claude Code a few days ago and hammered all of it out in an afternoon, it's very impressive. Not perfect, and as you say, having a good idea of what we're doing and how helps a great deal vs. figuring everything out from scratch. And having good tests and/or a stable test environment and processes running.

Multi-layered.

- Important stuff primarily lives in commercial cloud storage. All of that is also mirrored on the NAS.

- Everything from the NAS SSDs is dumped to the HDDs every 3 days. Both use MergeFS, so if any one drive dies (or both SSDs, or both HDDs), I can replace it and still have a copy of everything.

The entire NAS is also occasionally dumped to an external HDD that's stored at my parents' place. So basically, if the NAS breaks catastrophically, I am at risk of losing some recent stuff that hasn't been dumped there yet, but nothing of actual importance.

Some home routers also offer built-in VPN using Wireguard. Works amazingly well with my Fritzbox, near zero setup on the router itself and very simple config on the end devices.