HN user
https://www.gyan.dev
If that was the case, the graph would never have gotten to the heights it did.
What happened is that as the corpus of useful info increased, the need to pose new Qs decreased. AI much accelerated that decline by making available an 'oracle' trained on that corpus.
I’m selling my farm next year.
What will you do for ice cream then?
Yeah, what is the recognition of Jeeves/Wooster among the millennials?
How big is this page and what's the font size?
If you do open PRs at code.ffmpeg.org, remember to disclose and describe the AI contribution. You will also need to add FATE tests.
Changelog:
ffprobe -codec option
EXIF Metadata Parsing
gfxcapture: Windows.Graphics.Capture based window/monitor capture
hxvs demuxer for HXVS/HXVT IP camera format
MPEG-H 3D Audio decoding via mpeghdec
D3D12 H.264 encoder
drawvg filter via libcairo
ffmpeg CLI tiled HEIF support
D3D12 AV1 encoder
ProRes Vulkan hwaccel
DPX Vulkan hwaccel
Rockchip H.264/HEVC hardware encoder
Add vf_scale_d3d12 filter
JPEG-XS parser
JPEG-XS decoder and encoder through libsvtjpegxs
JPEG-XS raw bitstream muxer and demuxer
IAMF Projection mode Ambisonic Audio Elements muxing and demuxing
Add vf_mestimate_d3d12 filter
xHE-AAC Mps212 decoding support (experimental)
Remove the old HLS protocol handler
Vulkan compute codec optimizations
swscale Vulkan support
LCEVC metadata bitstream filter
Add vf_deinterlace_d3d12 filter
ffprobe: only show refs field in stream section when reading frames
ProRes Vulkan encoder
LCEVC parser
LCEVC enhancement layer exporting in MPEG-TS
My earlier flotsam: https://news.ycombinator.com/item?id=47404142
Changelog:
ffprobe -codec option
EXIF Metadata Parsing
gfxcapture: Windows.Graphics.Capture based window/monitor capture
hxvs demuxer for HXVS/HXVT IP camera format
MPEG-H 3D Audio decoding via mpeghdec
D3D12 H.264 encoder
drawvg filter via libcairo
ffmpeg CLI tiled HEIF support
D3D12 AV1 encoder
ProRes Vulkan hwaccel
DPX Vulkan hwaccel
Rockchip H.264/HEVC hardware encoder
Add vf_scale_d3d12 filter
JPEG-XS parser
JPEG-XS decoder and encoder through libsvtjpegxs
JPEG-XS raw bitstream muxer and demuxer
IAMF Projection mode Ambisonic Audio Elements muxing and demuxing
Add vf_mestimate_d3d12 filter
xHE-AAC Mps212 decoding support (experimental)
Remove the old HLS protocol handler
Vulkan compute codec optimizations
swscale Vulkan support
LCEVC metadata bitstream filter
Add vf_deinterlace_d3d12 filter
ffprobe: only show refs field in stream section when reading frames
ProRes Vulkan encoder
LCEVC parser
LCEVC enhancement layer exporting in MPEG-TS
with ffmpeg you need to make two temporary videos and then concatenate them
It can be done in a single command, no temp files needed.
These guys did not even bother with an official huggingface space
The dupe is what I linked. The orig is https://superuser.com/questions/601972
The orig wants a mono output with one of the original channels as signal source. This involves downmixing i.e. rematrixing the audio.
The dupe want to just mute one of the channels, not repan it. One can't apply map_channel to do what the dupe wants.
One can use a couple of methods to achieve the dupe, including pan. But the syntax of pan needed for the dupe case is not the same as the orig, or deducible from it. They need to consult the docs (fortuitously, the dupe case is an illustrated example) or get a direct answer. The 'technique' shown in the orig is not intuitively adaptable to the dupe - one needs to know about the implicit muting that pan applies, which is not documented or evident in the orig answer. So it's not a duplicate of the source Q.
But if you had a personal experience, it will be easier to look within your questions on your profile page.
I answer Qs on this topic, not post them.
----
Here's an example I found:
https://superuser.com/questions/1929615/ (the canonical q is about extracting as mono, the closed q is about muting one channel)
Please feel free to cite specific examples. I'll be happy to explain policy.
How do I search for Qs closed as duplicates with a certain tag?
You are positing that only questions with cosmetic or extraneous differences are marked as duplicates.
That's not the case. As a maintainer of a popular project who has engaged with thousands of Qs on SO related to that project, I've seen many Qs marked as duplicate where the actual answer would be different in a non-trivial manner. When I look at who all moderated on those Qs, they are usually users who haven't contributed to that topic at SO.
corrected
Except for their immune systems or lactose tolerance.
Remittances for 2023 made up 23% of state GDP.
Table 5.2, pg 51 of https://iimad.org/wp-content/uploads/2024/06/KMS-2023-Report...
You can’t solve the problem of understanding norms by writing copy
You can mitigate the problem by adding a short summation before or in between something they're likely to read.
Not quite frosted, but I went for a glass pane effect on the sidebar at https://www.gyan.dev/ffmpeg/builds/
There's a feature request for the open source & cross-platform x265 codec to support transparency, but it doesn't seem to be going anywhere.
x265 has added support for alpha very recently, but only using their standalone CLI. https://bitbucket.org/multicoreware/x265_git/commits/c8c9d22...
No, 16-bit PCM is the default audio codec. If no `-c` is specified for a stream, ffmpeg will encode using the default codec. But if `-c X` is declared where X=`copy` or something else, then that is honored.
This uses the hash muxer in ffmpeg, which consolidates all streams into one. Use the streamhash muxer to emit hashes per-stream, which can isolate any changes to specific streams.
You don't need a loopback decoder for that. The periodic extraction will depend on a filter, and you can just clone and send the output of that filter to the tiling filter.
My upload for the source pkg only finished 20 mins. ago. The Winget maintainer should update their manifest shortly.
API users shouldn't pay attention to the ffmpeg version but those of the libraries. API and ABI breaks only happen at major version bumps of those.
VVC decoder is available, but it's flagged as experimental, so you have to prefix `-strict experimental` before the VVC input `-i`.
Changelog:
- DXV DXT1 encoder
- LEAD MCMP decoder
- EVC decoding using external library libxevd
- EVC encoding using external library libxeve
- QOA decoder and demuxer
- aap filter
- demuxing, decoding, filtering, encoding, and muxing in the
- ffmpeg CLI now all run in parallel
- enable gdigrab device to grab a window using the hwnd=HANDLER syntax
- IAMF raw demuxer and muxer
- D3D12VA hardware accelerated H264, HEVC, VP9, AV1, MPEG-2 and VC1 decoding
- tiltandshift filter
- qrencode filter and qrencodesrc source
- quirc filter
- lavu/eval: introduce randomi() function in expressions
- VVC decoder (experimental)
- fsync filter
- Raw Captions with Time (RCWT) closed caption muxer
- ffmpeg CLI -bsf option may now be used for input as well as output
- ffmpeg CLI options may now be used as -/opt <path>, which is equivalent
- to -opt <contents of file <path>>
- showinfo bitstream filter
- a C11-compliant compiler is now required; note that this requirement
- will be bumped to C17 in the near future, so consider updating your
- build environment if it lacks C17 support
- Change the default bitrate control method from VBR to CQP for QSV encoders.
- removed deprecated ffmpeg CLI options -psnr and -map_channel
- DVD-Video demuxer, powered by libdvdnav and libdvdread
- ffprobe -show_stream_groups option
- ffprobe (with -export_side_data film_grain) now prints film grain metadata
- AEA muxer
- ffmpeg CLI loopback decoders
- Support PacketTypeMetadata of PacketType in enhanced flv format
- ffplay with hwaccel decoding support (depends on vulkan renderer via libplacebo)
- dnn filter libtorch backend
- Android content URIs protocol
- AOMedia Film Grain Synthesis 1 (AFGS1)
- RISC-V optimizations for AAC, FLAC, JPEG-2000, LPC, RV4.0, SVQ, VC1, VP8, and more
- Loongarch optimizations for HEVC decoding
- Important AArch64 optimizations for HEVC
- IAMF support inside MP4/ISOBMFF
- Support for HEIF/AVIF still images and tiled still images
- Dolby Vision profile 10 support in AV1
- Support for Ambient Viewing Environment metadata in MP4/ISOBMFF
- HDR10 metadata passthrough when encoding with libx264, libx265, and libsvtav1
OpenModelDB is a community driven database of AI Upscaling models
That's not big enough to include even most native components. My essentials build with only common 3rd party libs (like libx264) compresses to 20MB with LZMA2.
Or more likely, ffmpeg binary is embedded, considering that they don't provide instructions to download it on that page.