A 26-Gram Butterfly-Inspired Robot Achieving Autonomous Tailless Flight

by Terretta • 5 months ago

71 17 5 months ago

Terretta3• 5 months ago

If anyone is clicking but noping out of a white paper, deep in the paper are remarkably wonderful charts explaining what's going on to pull this off.

skaushik92• 5 months ago

I wish there were a video of this linked from the research paper.

Terretta3• 5 months ago

Here is the “eMotionButterfly” their charts show beat them in flight characteristics, but is 3x the weight and more of a dragonfly body than butterfly body:

https://www.youtube.com/watch?v=1gu3z7w4Vc8

troymc• 5 months ago

Wow, very cool video... and from 2015!

arthurcolle• 5 months ago

Not a single decent photo of the butterfly robot

falcor84• 5 months ago

It's not the best, but there's a photo of the butterfly in Figure 1(B) on page 20.

On a separate note, if you're looking for something more explicit, there are some suggestive violin plots in item F in the same figure, ironically with the caption even saying "Nymphalidae" (here referring to the family of butterflies, but "nymph" is also a general anatomical term/prefix for female genitals, or particularly the inner labia or clitoris).

ck2• 5 months ago

* https://arxiv.org/html/2602.06811v1/figure/SciRob_Fig1_Biomi...

* https://arxiv.org/html/2602.06811v1/figure/SciRob_Fig2_Chara...

* https://arxiv.org/html/2602.06811v1/figure/SciRob_Fig7_Discu...

adolph• 5 months ago

Gotta love how their flight control board is the same size and mounted to the back of the ESP32 module.

Edit: It references ELRS but I don't see one of the standard Lora tower antennas used in the smallest commercial modules. They also often use an unshielded esp32 Soc instead of the full module.

   The onboard embedded system is based on an ESP32-S3-WROOM-1-N16R8 (dual-core 
  32- bit Xtensa LX7, 240 MHz, 16 MB Flash, 8 MB PSRAM), supporting parallel 
  real-time wing actuation and wireless communication with a custom ground 
  control station for data logging and monitoring. . . . and an LDO outputs 5 V
  to the ExpressLRSmodule. The ELRS module serves only as a safety override for
  manual control.

dylan604• 5 months ago

Fig 1 showing the weight broken down by components is interesting. I would have expected the battery to be a larger percentage of the weight.

jonplackett• 5 months ago

Nor a video. So many words though.

GrinningFool• 5 months ago

https://en.wikipedia.org/wiki/Danny_Dunn%2C_Invisible_Boy - leaving the realm of science fiction at long last.

CamperBob2• 5 months ago

Feels like the future is here at last. First we get Asimov's Bard (https://nyc3.digitaloceanspaces.com/sffaudio-usa/mp3s/Someda... ), now Professor Bullfinch's Isit.

Oh, and General Gruntle from the second story is cutting deals left and right with the labs that brought us the first.

teleforce• 5 months ago

Accurate and low latency attitude estimation is critical for stable flight of the flapping-wing platform. We implemented a quaternion-based Madgwick filter (80) on the ESP32-S3 (dual-core 240 MHz with floating-point unit) to fuse IMU measurements in real time. This approach was selected for its low computational cost, fast convergence, and robustness under dynamic motion, outperforming complementary filters in accuracy and avoiding the high complexity and matrix operations of extended Kalman filters.

Bravo, quaternion is the (only) way to go, the sooner UAV/UAS system designer realize this the better.

heyitsguay• 5 months ago

Interesting, can you explain why?

TrainedMonkey• 5 months ago

You can chain normalized quaternions to combine or diff transformations. For example you can subtract desired attitude quaternion from predicted attitude quaternion to get attitude error quaternion which you can then feed to control algs designed for driving that error to zero. This is even more important when multiple frames of reference are involved as quaternions can be used to transform between them.

HardwareLust• 5 months ago

"Their non-invasive maneuverability is ideally suited for real-world applications, such as confined-space inspection and ecological monitoring, inaccessible to traditional drones"

I'm having a hard time imagining a situation where flapping wings would be superior to a rotary winged drone. Anyone have any insight?

A 26-Gram Butterfly-Inspired Robot Achieving Autonomous Tailless Flight

Related Stories