Blog series on building an air sensor with Arduino

https://www.airdeets.com/blog/diy-arduino-based-air-sensor-pt1

by _l0wh • 4 years ago

86 21 4 years ago

_l0wh3• 4 years ago

The first 2 parts are out! It's currently focused on a particulate matter sensor (the pms5003) for taking pm2.5 measurements. If you have any feedback or if there are any other features/sensor integrations you'd like to see please let me know.

Some ideas I have floating in mind: a temperature/humidity sensor, CO2 sensor, VOC sensor, and MQTT integration.

roger_3• 4 years ago

Good exercise but FYI ESPHome is probably the way to go for most people.

All the sensors you mentioned are likely already supported and just need to be added to a yaml file.

_l0wh3• 4 years ago

I didn't know about this. I'll definitely check it out. Thanks!

xconverge• 4 years ago

Also look at the failure time and make sure you are sleeping correctly when not reading. esphome has this implemented and it is really great, it wakes up 10 seconds early, starts the fan/airflow, then takes the reading, then sleeps (for 50 seconds) in my case where I want to sample every 1 minute. Without this the lifetime of the sensor is around 1 or 1.5 years of continuous use if I recall correctly.

aulin• 4 years ago

Even as an experiment with the sole purpose of learning stuff and having fun I find Arduino libs tend to hide all the fun stuff effectively diminishing the learning experience. Sometimes it's good to reinvent the wheel (like writing the driver yourself with the sdk) if your goal is to understand how why it works.

christiangenco• 4 years ago

I love it! Great roadmap too. In a previous discussion of DIY indoor air quality sensors[1] MQTT+Zigbee was brought up as a good standard interface.

1. https://news.ycombinator.com/item?id=33773786#33775308

denvrede2• 4 years ago

Maybe it's a stupid question but for the verification bytes you're adding the different constants, commands and options. For the sleep that comes out to 0x173 (as you also wrote down). Why is the higher verification byte then 0x73 and not 0x173? Or is it a typo?

moefh• 4 years ago

[Note: I'm not the author]

0x173 doesn't fit in a byte. As the text explains, there are two validation bytes; the first one gets the high 8 bits ("the high byte") of 0x173 (which is 0x01) and the second one gets the low eight bits (0x73).

chazeon• 4 years ago

Great write up.

I have been eyeing pms5003 earlier. Since there seems to be a fan in the sensor, I wonder is it noisy?

_l0wh3• 4 years ago

Nope, it's hardly audible. The only way for my to tell if the fan is on or off is by looking at it to see if it's spinning.

bryceacc• 4 years ago

i have the pms7003 and can't hear a thing. It's maybe a half inch centrifugal fan

ahaucnx• 4 years ago

Good choice with the PMS5003 which is in our experience one of the best sensors from Plantower. It is bigger than the PMS7003 or PMSA003 but in our experience more accurate and has a longer life span.

A few things you can consider in the follow up blog post:

a) When you add the temperature and humidity sensor, one of the key aspects is to shield it from heating up inside the enclosure by the ESP (and also the PMS sensors create heat).

b) If you live in area or high humidity, the PM values will be overstated but there are compensation algorithms. We use for example the Di Antonio algorithm [1].

[1] https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6164928/

fnands• 4 years ago

Any recommendation for CO2 sensors?

ondori• 4 years ago

scd30 does the trick

moloch-hai• 4 years ago

The main thing you need to know about a CO2 sensor is that you also need a pressure sensor for its readings to mean anything.

Expect to pay ~$50 for an actual CO2 sensor. The cheap "organic gas" VOC sensors don't qualify. But you probably should add on one of those anyway.

MertsA• 4 years ago

The grandparent ships out the SenseAir S8 for CO2 so presumably they're still happy with it. I have no complaints myself but I haven't compared it to any reference standard. He's the founder behind AirGradient. https://www.airgradient.com/open-airgradient/ They have a DIY version that's an open source design and you can either source components yourself or just skip trying to track down everything on the BOM and buy a kit from them that comes with a sleek injection molded housing as well.

roger_3• 4 years ago

Do you have a reference on the PMS5003 being better? Any thoughts on Plantower's newer sensors (e.g. PMS9003)?

rex_lupi• 4 years ago

You're not really `building` a sensor. More like "Blog series on interfacing an air sensor with Arduino".

bloopernova• 4 years ago

Somewhat related: I had trouble with reliability of Adafruit's CircuitPython and MicroPython on various microcontrollers. I couldn't get them to reliably send their data to an MQTT queue over wifi.

So I gave up and bought a couple of AirThings air sensors.

Lucky I did. Our furnace air intake pipe had been blocked by multiple birds nests, and the secondary pipe for the water heater was incorrectly connected. Our indoor CO2 levels were higher than 4,000ppm! The levels would also jump when the furnace kicked on, even with windows open.

Thankfully apartment complex maintenance was able to fix it immediately and levels are much lower now, especially when the furnace is running. (About 500ppm with windows open, 700 with them closed and furnace running, 1,100ppm if the windows haven't been open and the furnace hasn't run for a while.) It's possible our health has improved because of the sensors.

I got 2 AirThings View Plus. I'm not affiliated with the company other than having bought their products.

Blog series on building an air sensor with Arduino

Related Stories