agent462

So your theory is anecdotal.

You should also check out multi-color print times on the XL vs the ASM or any other solution.

I think what Bambu has done is incredible but these are different machines for different reasons. The XL has a massive print area compared to the Bambu printers and the toolhead design I prefer. I just gifted an x1-carbon to my mom for Christmas. I'm not a hater or Prusa shill but people are just spouting opinions without data or truly understanding the differences between the machines.

Please explain to me why you think there is a fundamental engineering failure in the frame design - I'd like to see the data.

Just so you can get an idea of where I am coming from, I have a Prusa XL and a Voron 2.4 right next to each other.

The Prusa XL frame is very solid and it's also not a quad gantry. The lead screws take the weight of the bed. The Voron uses 20x20mm extrusions and the Prusa XL uses 30x30mm extrusions and it has stamped steel for additional rigidity and support. On the Voron, I've added titanium backers to reduce flex from thermal linear expansion. While the XL would technicall have thermal expansion, when enclosed, it will be much less from the much larger extrusions and additional support.

The toolheads on the XL on the other hand are heavy, they will likely be the larger issue with speed+quality. People also complain about the Stealthburner weight with TAP.

There are faster projects than the Voron just like there are faster printers than the XL. You have to weigh what you want. The toolchanger design, for me, works flawlessly and is so much better than the AMS, ERCF, MMS. More companies will clone it.

At one time I worked out 2 hours, 3-4 times a week with a majority of that being cardio. I then started having back problems and it hindered how I worked out until I didn't anymore. Over the years I put on weight and I sit all day for work.

I would never get very far with workouts because my back would flare up badly. In an effort to get back in shape and lose some weight I've been doing a 10 minute cardio workout 3-4 times a week.

It's helped tremendously and I've lost over 15 pounds. It's also prevented my back from really flaring up because I'm not over stressing it. I've even worked up to doing an additional 30-40 minute cardio workout once a week.

I'll never have the cardio I had years ago but I'm in much better shape than when I was doing nothing. It's also motivated me to start wearing my fitbit again and getting up and walking through my work campus once a day.

Yes it can help. What the naysayers don't realize is that many people are out of shape, have medical issues, etc. They also don't realize that even getting into a short rhythm of working out snowballs into other self-conscious health thoughts and activities.

I think you're missing my point. I'm not saying I feel skimmed. I'm just stating what happened.

What I'm saying is that he skimmed from my last deposit. I'm hoping he did use it so others got their coin back.

First, I fully understood what I was getting in to.

I first deposited .1 bitcoin to see if it was real and got 0.11978 back.

Ok, this will be fun.

I then deposited .8591 and got back 1.1999. Ha this is hilariously fun. More gambling!

I then sent 1.2001 and got back 0.8589. Wait what..

The game ended and he skimmed from me to hopefully pay someone else back and not pocket it.

alias ip="dig +short myip.opendns.com @resolver1.opendns.com"

I'm a long time reef keeper so I instantly jumped on this with the kickstarter campaign. Like many that bought this tank they were littered with issues and flaws in the design that sent the jellyfish to their death.

I consider my reefing keeping ability as advanced with a 220 gallon main display. This tank was also advertised for beginners. As someone who understands the ecosystem, how to mix the salt/water and test for common parameters I would highly discourage this tank and jellies to beginners.

This tank had too many issues.

There are competitors: http://www.moonjellyfish.com/products/eon-jellyfish-system http://www.cubicaquarium.com/product-jellyfish-aquarium.php http://sunsetmarinelabs.com/

They may cost more but the reviews are much better.

Minneapolis, MN - Full-time - Operations Engineer

BestBuy.com is looking for top Operations Engineering talent to continuously transform our infrastructure using leading open-source technologies. You will have the ability to help shape a best-in-class operations team. We focus on agile operations with a devops culture. You will have the ability to work at large web scale to support a multi-billion dollar ecommerce site.

Responsibilities

- Manage a multi-origin, zero-downtime, highly scalable web infrastucture.

- Build, scale, and secure www.bestbuy.com infrastructure, focusing specifically on a fully automated Linux environment

- Design, develop and improve automation and tools for systems management, including development of scripts for our fully automated environment with Opscode Chef

- Develop operational practice for technologies like Opscode Chef; multiple Public Cloud platforms; Basho Riak; Cassandra; Tomcat; Apache; Nginx; Sensu; Splunk; Graphite; Solr

- Perform zero-downtime deployments accross multiple globally distributed origins.

- Focus on building solutions from scratch or using leading open-source technologies. Focus on quality solutions that may be open-sourced, like Opscode Chef cookbooks, via the Apache 2.0 license.

- Participate in a L2-L3 rotating 24/7 oncall schedule. Rougly one week out every six, schedule frequency may change by team size.

http://www.bestbuy-jobs.com/job/Richfield-Operations-Enginee...