Classic NES Series Anti-Emulation Measures

https://endrift.com/mgba/2014/12/28/classic-nes/

by jpfau • 12 years ago

161 26 12 years ago

michielvoo• 12 years ago

The STM to DMA registers (using a single CPU instruction to trigger DMA) seems like a valid optimization, unrelated to piracy prevention.

centizen• 12 years ago

It certainly seems valid, but in context of all of the other protections it's difficult to say for sure if is or not.

But considering it either hasn't been used in other games, or at least infrequently enough this emulators author has never seen it before, I'm leaning towards it being another protection.

ianferrel• 12 years ago

Or they upgraded their compiler/enabled more optimization.

Combining sequential writes into an STM is a standard optimization.

kstenerud• 12 years ago

With STMIA it's an understandable optimization, but nobody would expect STMDA to work the way it does. That would require careful testing and a deliberate choice to use the weird one even though it feels counterintuitive.

pm215• 12 years ago

The order is guaranteed by the architecture though (not merely by the implementation), provided the target is Device or Strongly Ordered memory. ("For a VLDM, VSTM, LDM and STM instruction with a register list that does not include the PC, all registers are accessed in ascending address order for Device accesses with the non-Reordering attribute." -- v8 ARM ARM.) So you don't need to test at all, you can just rely on the documentation to tell you it works.

Incidentally, the note "Since the write is done with one instruction, a DMA cannot preempt the CPU in the middle of the writes" from the article is likely not correct. The STM may be only one insn but it may generate multiple memory accesses to the bus, so it's quite plausible that a DMA device might get accesses in between words. (Of course RAM is usually mapped Normal in which case caches and store buffers will be heavily reordering it anyhow, so nobody relies on ldm/stm ordering here.)

mschuster91• 12 years ago

Using stuff like the pipeline stage is really bad imo, because it may prevent your game from running successfully if it is decided on a later stage to either upgrade the internal hardware (like it was done with the shitload of PS3 variants) or it is decided years later that the successor console should be able to play legacy platform games.

klez• 12 years ago

I suppose that, since the cartridge was developed by Nintendo, maybe they knew there weren't going to be such hardware upgrades. Or they were just shortsighted.

JonathonW• 12 years ago

The first of these games was released in February 2004, late in the GBA's product cycle. At that point, the Nintendo DS hardware would've already been pretty much finalized (it released in Nov 2004), so they already knew what things looked like for backwards compatibility (the DS includes the GBA's ARM7 processor).

AshleysBrain• 12 years ago

This doesn't seem to me to be evidence of deliberate anti-emulation features - just imagine a hastily written port by relatively inexperienced developers who don't know about these quirks, and then it could be said:

#1 - memory mirroring - accidental bug that doesn't matter since hardware ignores those bits

#2 - code in vram - possible technique to save memory in another memory area?

#3 - STM to DMA - shortcut to DMA that "just worked" without the original developers knowing the CPU write ordering

#4 - save type faking - just a library bug that breaks the emulator heuristics?

#5 - prefetch abuse - idk, maybe a legit attempt to prevent reverse engineering? Don't really know enough to comment if there's a reasonable purpose for it

#6 - audio FIFO irregularities - just a bug in the emulator?

How many C/C++ devs accidentaly rely on undefined behavior or specific x86 quirks? It's really easy to do, and doubly so if you're targeting a single exact hardware configuration. I'm sure it's easy to see these as hostile attempts to make emulator developer's lives harder, but I think they could just as easily be accidents, especially with a complex project like porting NES games to GBA hardware.

On the other hand, I dunno, maybe Nintendo pull out all the stops to try to prevent reverse engineering and deliberately use these kind of tricks, but really, they'd go the extra mile for old NES game ports?

Having said that, still a great article for covering some fascinating hardware quirks and the challenges of writing a bug-compatible emulator!

cdr• 12 years ago

This doesn't seem to me to be evidence of deliberate anti-emulation features - just imagine a hastily written port by relatively inexperienced developers who don't know about these quirks

If it were one thing, maybe, but six things done in almost no or no other games repeated across (presumably) thirty ported games? Infinitesimally unlikely.

Also, these were done by Nintendo Japan - how likely is it that they're "relatively inexperienced developers writing hasty ports". These tricks would seem the hallmark of very experienced developers who know the hardware intimately.

teknologist• 12 years ago

Nintendo Japan doesn't have interns?

smosher_2• 12 years ago

Some of these are definitely deliberate.

#1. The memory mirroring is IIRC a normal part of the hardware involved. Executing mirrored code? I can't think of a good reason to do it other than to trip someone up.

#2. You might do this in earnest, but only if you're decompressing the code or otherwise generating it and just can't stick it in main RAM. GBA ROMs make up part of the global address space. There's simply no need to copy existing code around.

#3. I'm not familiar with it enough to comment. Sounds like it could be innocent.

#4. Seems unlikely you would include an unnecessary code path, and then intentionally kill the game if it happened to work. This is actually your typical anti-debugging technique: trick the environment into to doing something you can detect, then disable.

#5. Prefetch games usually combine the detect and disable steps mentioned in #4. #1 and #2 are also related. This is a good contender for "oldest trick in the book."

#6. Probably a bug.

Source for GBA-specific stuff: http://problemkaputt.de/gbatek.htm

smilekzs• 12 years ago

Totally agree that #5 is deliberate.

monocasa• 12 years ago

#2 For tight loops on the GBA you wanted 32bit ARM instructions in an area of RAM with 32bit accesses. There was a performance penalty both for using thumb and for running non thumb out of ROM (the bus to ROM was only 16bits). If there was a lack of WRAM for some reason it would totally make sense to put a tight loop into VRAM. (And for whatever reason Nintendo is really into putting random stuff into VRAM. On the DS, one of the ARM7 images would put WLAN packet buffers into an unused VRAM bank to reduce pressure on other RAM banks).

raldi• 12 years ago

#4 could be as innocent as:

    /* Returns a bitwise-OR'ed number showing
       all the possible places you can save to */
    int get_available_save_locations();

    [...]

    int save_locations = get_available_save_locations();
    if (save_locations != SAVELOC_NVRAM) {
      goto FATAL_ERROR;
    }

jdboyd• 12 years ago

#3 seems like it could even be a legitimate optimization.

#4, If they did a SRAM write, then a EEPROM write and only raised an error when the EEPROM write failed, your suggestion would seem plausible, but since they do an SRAM write, then raise an error because the SRAM write worked, it is hard to believe this isn't an intentional protection feature.

hibikir• 12 years ago

It's not as if it's a defense against emulating the consoles on a PC: That's not really a problem worth investing time into. However, those tricks also work against bootleg hardware, which can be seen as emulation. It even works against counterfeit cartridges, in the case of the save game trick.

DS games also come with copy protection to stop people from running it in cartridges that run gmaes off of images, like the R4. In that case, the product the pirates offered was actually better than buying an original cartridge: I could buy 20 games and carry a case of games, or keep them al in a single micro SSD card, and switch games at will from the boot menu.

frozenport• 12 years ago

>I’m not sure why they put all of this effort into causing trouble for emulator developers in this one specific case,

I know why!

If went to bazaar in 90s Russia you would see these '40-in-one' video-game cartridges which were a bunch of normal bootleg games linked together by a bootscreen. You could imagine the NES emulator falling under the same category. Sometimes emulators were sold on CDs.

http://i.imgur.com/dJ142.jpg?1

freshyill• 12 years ago

There were actually mall kiosks in the US that sold similar things that actually had pirated copies of Nintendo's first-party games. This was either late '90s or early 2000s.

nogridbag• 12 years ago

Ah memories. I had one of those gold NES honey bee adapters with a 250 in 1 cartridge we got from a Chinese friend. At least a quarter of the games were dups with minor differences and we paid $250 for it, haha. At the time it seemed like a good deal!

vlunkr• 12 years ago

Yes I played one of these as well that a friend got at the mall. Except I would say about 3/4 of the games were clones, usually with some terrible color palette swap. He bought it in the US though, I can't believe a product like that made it to the market. Especially since every game on there was pirated.

lmm• 12 years ago

Sure, but these are NES games; the ROMs for all of them are already on the internet. This is putting security locks on the barn door decades after the horse has bolted.

glinscott• 12 years ago

I wouldn't say the GBA was too forgiving about mistakes. You had very limited resources, and sometimes needed some tricks to get things running acceptably. I do remember a few things like a divide by zero in a game that ended up jumping off into the middle of RAM and by luck, the game just happened to continue. But the examples from the article seem to be on purpose.

2) Code in VRAM was sometimes faster than executing code from the ROM, due to waitstates. This was used on the Nintendo DS as well. There was a lot of VRAM, and it was 0-waitstate, while your instruction cache was tiny.

3) STM to DMA registers was an optimization that was used fairly commonly, at least in homebrew games

5) This is definitely anti-emulator code :)

ConnorG• 12 years ago

Do you happen to know anywhere to read further on the topic of programming tricks used in GBA (or any platform) games?

I always find these things really interesting.

Classic NES Series Anti-Emulation Measures

Related Stories