The Absolute Beginner's Guide to Arduino

http://forefront.io/a/beginners-guide-to-arduino

by achalkley • 14 years ago

210 29 14 years ago

sachleen• 14 years ago

Pretty good write up for beginners. I think you should add a link to http://arduino.cc/en/Tutorial/HomePage in the Whats Next so people can see what else they can do with the Arduino!

achalkley11• 14 years ago

Good idea.

JungleGymSam• 14 years ago

The Arduino website has a nearly identical tutorial to yours. Which is interesting because it was yours that prompted me to finally stop being unreasonably afraid of experimenting with Arduino and buy one. So I did.

Congrats.

lylejohnson• 14 years ago

This is a topic I've been interested in for some time now and this looks to be at the right level (i.e. absolute beginner) for me, so thanks very much for sharing.

Can anyone point me to a similar resource for the Raspberry Pi?

achalkley11• 14 years ago

I got my 5 yo daughter a Pi but I think there's several more layers of complexity (and purchases) to get it going with hardware hacking. It's a more fully fledged computer and can get people started with basic programming with Scratch, then on to things like Python and then C if you dare :)

I went to a hacker space open house in Orlando (FamiLAB) and a colleague and I were asking whats the difference between a Pi and an Arduino and a guy said what do you want to do and I said make an LED flash...And he said to start with an Arduino and I can see why now, if you want to get in to electronics (and you already have a computer) an Arduino is the way to go.

A Raspberry Pi is a fully functional computer so you have to wait for it to boot in to linux before it can do any other tasks. An Arduino is (almost) instantly on and running you program. Both are great teaching and learning tools but it depends what you want to do with them.

Joeboy3• 14 years ago

> A Raspberry Pi is a fully functional computer so you have to wait for it to boot in to linux before it can do any other tasks.

There's nothing to stop you programming the pi bare metal style like an arduino. It's not as well documented but it's perfectly doable and quite fun.

https://github.com/dwelch67/raspberrypi

http://www.raspberrypi.org/phpBB3/viewforum.php?f=72

joshj19• 14 years ago

I'm assuming you want to do some low-level hardware integration with your Pi, in which case I would suggest starting by taking a look at this page:

http://elinux.org/RPi_Low-level_peripherals

It provides some information on how to interface with the GPIO pins with a multitude of programming languages. Granted it may not be an absolute beginner guide, it still has a lot of useful information. If I can find another guide I'll comment back here.

I'd also want to echo something that the other reply to your comment mentioned, which is that you should seriously consider starting with an Arduino if you want to do some lower-level programming/interfacing with hardware. From my personal experience, there's a little more documentation on that sort of thing with Arduino than the Raspberry Pi. Additionally, the Raspberry Pi's GPIO pins are not fault tolerant, which means you could damage your Pi if you wire up your hardware improperly. If I remember correctly, Arduinos typically have some voltage fault tolerance (at least there are variants which do), and even if you fry the actual microcontroller chip on the board, it can be removed and replaced for a couple of dollars. Once you've got some experience on an Arduino board, then I'd recommend doing some of the low-level stuff on the Raspberry Pi.

kylemaxwell• 14 years ago

Excellent. I recently got my 9yo daughter started on those simple electronics kits with various components mounted on a cardboard frame and springs for terminals to interconnect them in various ways. But that's rekindled my _own_ interest in electronics (which I haven't really indulged in >15 years) and I've been considering Arduino or some stuff from Parallax based on the DEF CON badge from last summer.

achalkley11• 14 years ago

I got my 5 yo daughter a Pi and she's been playing around on Scratch (and typing) and it's surprising how quickly they pick this stuff up. She guess doing a minus number would move a sprite in the opposite direction!

I was experimenting writing libraries in C++ (I prefer a more OO interface to things) so I created an AnologLed and DigitalLed class and showed my daughter in the code how I made a red LED come on and she proceeded to make the orange and blue ones come on too.

This stuff it the literacy of the 21st century.

apl• 14 years ago

  > She guess doing a minus number would move a sprite in
  > the opposite direction!

I'm curious how that is possible. Did she just move a slider towards the negative range? Randomly guess it? Does she have a notion of continuity past zero?

kh_hk• 14 years ago

Just as a tip for Arduino newcomers, if you want to put the UNO R3 into DFU mode [1], just bridge these two pins together with a jumper or a cable for a moment:

        ____________________
       | o       ···········
    RESET ---> + · ·
    GND -----> + · ·
      _|____
     |      |
     | USB  |
     |______|
       |
       |

Then, if you want to use the dfu-programmer[2], you need to apply a patch[3] to make it work with the R3.

Being myself a complete newbie, I found it time consuming to reach the state in which I knew how and what to do just to upload a new firmware.

[1]: If you want/are interested in playing with Arduino as an USB device.

[2] http://dfu-programmer.sourceforge.net/

[3] https://aur.archlinux.org/packages/dfu-programmer/

achalkley11• 14 years ago

As a complete n00b to all this stuff there seems to be some more stuff I need to look in to, thanks!

rediah• 14 years ago

All this reminds me of days when I tried to hack my Hayes modem to increase the speed from 300 to 900 bauds.

marcosdumay• 14 years ago

Thanks a lot. I've just got one Arduino, and was wondering where to start :)

achalkley11• 14 years ago

I'm glad you know where now :)

ssharp• 14 years ago

I'm totally new to Arduino and hardware (also gained interest over the holiday). There are some good docs on the Arduino website, but once you get into less common components, it's weird to see how little info is out there. Programmers are incredibly lucky to have so many amazing resources and I think I've just taken that for granted.

I will say that Arduino has really sparked my imagination. I'm digging out garbage electronics (an old clock radio for example), taking them apart, and trying to figure out how to interface their components with Arduino.

achalkley11• 14 years ago

That's a great idea. I felt a great sense of accomplishment dismantling a simple finger torch and putting it in a circuit connected to an Arduino UNO and varying the current going to it. It's like programming but in real life :)

evoxed• 14 years ago

For those of us who already spend an inordinate amount of time digging through bins of old and often dead electronics for components... I'm just glad that Arduinos and other similar devices have made my hobbies more acceptable (and helpful!).

guynamedloren• 14 years ago

If you're interested in Arduino and are familiar with js/node, check out Johnny-Five (https://github.com/rwldrn/johnny-five).

"My goal for Johnny-Five is to create a framework for programming Arduino Robots with nothing more then JavaScript. I believe that JavaScript, inherently asynchronous and the platform that Node.js has built around this paradigm, is the perfect environment for writing evented, streaming programs for controlling the highly synchronous world of hardware." -- via http://weblog.bocoup.com/javascript-arduino-programming-with...

I don't know anything about robotics or arduinos (though I've done a bit of electronics hacking/tinkering throughout my life), but this project makes me want to jump right in head first.

achalkley11• 14 years ago

You know I think I may have seen this guy's videos/post before. Seriously one night I was just totally going around YouTube and just watching all the cool stuff people were doing. It's contagious!

carwithcookies• 14 years ago

I also gifted myself an Arduino (Leonardo/Micro) over the holidays and have had a lot of fun working through the basic exercises and thinking up imaginative ways to use it.

Check out this Arduino for Beginners (In Comic Form) - probably particularly good for those of you who gifted an Arduino to children, and links to other resources in the last panels.

http://www.jodyculkin.com/wp-content/uploads/2011/09/arduino...

The Absolute Beginner's Guide to Arduino

Related Stories