ZeroFS vs. Amazon S3 Files

https://www.zerofs.net/blog/zerofs-vs-aws-s3-files/

by cbrewster • 11 days ago

92 29 11 days ago

zerofs.net

Lucasoato• 11 days ago

The article diagrams can’t be seen well if the device has the dark mode as default, just a suggestion for the author.

Opened with Safari in iOS

ranger_danger• 11 days ago

I only saw one diagram but it is perfectly visible for me on the desktop.

smartbit• 11 days ago

I have the same in Brave on iOS: to see the the diagrams I need to turn of Night Mode.

bayesnet• 11 days ago

The page appears to be dark themed even without dark mode enabled; if I use Noir to force-add dark mode, then the diagrams indeed become difficult to read but this seems like a Noir issue more than a site issue

pierrebarre6• 11 days ago

Author here. Thanks for posting this!

It’s been quite a ride building ZeroFS, and I’m happy to answer any questions.

chillfox• 11 days ago

Thanks for building this, I am just about to give it ago with my self-hosted Garage cluster.

Does running `stat` against a file require pulling the whole file from s3, or can that be handled by the metadata?

Do you know what backup performance is like for something like borg/borgmatic or restic, especially on follow up runs where most files are just checked.

Is there any particular Redis/Valkey config you recommend when using it for `conditional_put`, or just default config?

Is there any chance for NFSv4 support?

pierrebarre6• 11 days ago

Thanks!

stat doesn’t pull the file contents from S3; it only accesses the metadata tree, which is usually cached.

I haven’t benchmarked Borg or Restic specifically. Sequential writes can comfortably reach several Gbit/s. For follow-up runs, if they only stat unchanged files, that should stay entirely in metadata.

The default Redis/Valkey configuration should work fine for conditional_put. NFSv4 is unlikely for now. It would add a lot of surface area, and I’m pretty happy with where the 9P extensions are today.

tandr2• 11 days ago

I'm thinking about using this and have a few questions:

    1. How are hardlinks and duplicate files (same content, different paths) handled?
    2. Does deduplication work on a block/chunk level for partially matching files, or does it only look at whole files?
    3. Is there any specific integration or handling for Copy-on-Write (CoW)?

Thank you!

pierrebarre6• 11 days ago

Hardlinks work as you’d expect: multiple paths point to the same inode and data, so a write through one path is visible through the others. Two separate files with the same contents are stored separately.

There’s no deduplication, either whole-file or block-level. That’s intentional, mostly because of the impact it would have on locality.

If by CoW you mean reflinks, those aren’t currently planned either. They avoid the content matching part of deduplication, but still require sharing extents between files and come with similar locality and complexity tradeoffs. Internally ZeroFS is copy-on-write, with immutable segments and checkpoints, but that isn’t exposed as reflinks.

the_duke2• 11 days ago

I was investigating the design a little. Two big questions:

A) You notably don't write a recovery log (WAL/journal) for things not yet flushed, so data can be lost. Do you have plans to add this? I think it would be pretty crucial.

B) the system is single writer. Do you have plans for adding horizontal scalability so a writer can be dynamically selected and routed to, transparent to the client? (Or with client cooperation, but without forcing sharding on the user)

nubg• 11 days ago

This blog post seems to have been written by an AI based on a prompt you gave it? Can you confirm or deny this?

selfhoster13123• 11 days ago

I've been curious about ZeroFS. My usecase is running a real POSIX filesystem on top of garage for integration with non-S3 services. I've had very bad (short) experiment with JuiceFS (1). Is it worth benchmarking `zerofs mount` with garage?

My usecase is NAS storage of many small files + some big files (think big shared SMB for a non-profit). I need:

- fsync durability (as promised on zerofs homepage), including sqlite durability (so NFS is out of the question)

- inotify support for external script integration (did not find an issue/docs about this)

- support for reading/writing small blocks without hammering the CPU/disks (benchmarked with JuiceFS using torrents and was catastrophic)

Do you think ZeroFS currently makes a good candidate? If not, is the described usecase part of the ZeroFS roadmap?

(1) https://git.deuxfleurs.fr/Deuxfleurs/garage/issues/1021

snapplebobapple2• 10 days ago

Did you get garagefs to work well? I ended up moving to rustfs for my plakar and restic backup station because the performance was abysmal on garage. i also dont really get the point of zerofs. Seems like you are building a posix fs on top of s3 that is built on top of a posix fs... seems like a lot of extra steps that probably degrade performance vs just backing up that first posix fs semi regular.

pierrebarre6• 10 days ago

Yes, I think it’s worth benchmarking.

zerofs mount has durable fsync and fcntl byte-range locking.

Inotify works for changes made through the local mount. It won’t report changes made through another client, though.

Small writes operate on 32 KiB extents. Partial overwrites are read-modify-write, but the FUSE writeback cache helps combine them, and the resulting extents are packed into segments rather than producing one S3 PUT per write.

I’d be interested in the results if you try it.

tony_francis• 10 days ago

How does the performance compare to juicefs?

hhthrowaway12302• 11 days ago

I really want this, but it feels a little scary to trust all my files. I wouls like it if there was some contineous suite trying to corrupt the files and then see the failure cases!

pierrebarre6• 11 days ago

That’s a fair concern. The closest thing right now is a deterministic simulation suite that injects storage faults and crashes at arbitrary points, then checks the recovered data against reference models. It runs hourly with fresh seeds.

CI also runs pjdfstest, xfstests, stress-ng, ZFS scrubs, and Jepsen crash/failover tests: https://github.com/Barre/ZeroFS#testing

ZeroFS is still pretty young as storage projects go, so I completely understand wanting to see it prove itself over time.

ahofmann• 11 days ago

Why the hell was this answer dead? I vouched for it, because I don't see what might be wrong with it.

hhthrowaway12302• 11 days ago

Also would love to know how was we could iterate over the files. ie a bit how duckdb allows for paruet fikes scanning and reading would be nice to see how fast we can query the fs for ai/ml training workloads

jijji• 11 days ago

s3 is expensive... there are a lot of cheap options. I think I pay $48/month for a linux vps with 8 cpus and 16tb of storage with interserver.net... the same storage on amazon s3 is $377/month lol

Onavo• 11 days ago

Their bandwidth costs are overpriced yes but in terms of storage you are paying for RAID3 replicated across three data centers (configurable) and high availability. The engineering behind it is also formally verified with strict theoretical bounds on data loss. $48*3 = ~$150 is within the same ballpark if you factor in the managed services and cloud overhead.

deknos• 11 days ago

how does encryption work with zerofs?

vasanthps• 11 days ago

how does it compare with cloudflare r2

ZeroFS vs. Amazon S3 Files

Related Stories