Message Queues: A Simple Guide with Analogies (2024)

https://www.cloudamqp.com/blog/message-queues-exaplined-with-analogies.html

by byt3h3ad • 6 months ago

111 28 6 months ago

coronapl4• 6 months ago

While queues definitely play an important role in microservices architecture, I think it’s worth clarifying that they’re not unique to it. A queue can fit perfectly in a monolith depending on the use case. I regularly use queues for handling critical operations that might require retrying, for having better visibility into failed jobs, ensuring FIFO guarantees, and more. Queues are such a useful tool for building any resilient architecture that framing them as primarily a microservices concern might cause unnecessary confusion.

robertlagrant• 6 months ago

Totally agree. Banks use durable queues a lot to make sure things get processed. Or at least they used to.

coronapl4• 6 months ago

The analogy could be: “Queues are the like the todos list of your team. The todo item (message) stays there until it is successfully completed. It can be handled by the producer (monolith) or it can be handled by someone else (microservices).”

Aurornis3• 6 months ago

Monoliths also have to scale to multiple servers eventually, so message queues are an important architectural component to understand regardless of the organization of your services.

charcircuit3• 6 months ago

Even without multiple servers a single server itself has many cores. So if you aren't using multiple threads you are leaving performance on the table.

NikolaNovak2• 6 months ago

Absolutely, 100%.

I work on PeopleSoft Enterprise Resource Planning applications - the "boring" back-office HR, Pay, Financials, Planning etc stuff.

The core architecture is late 80s - mid 90s. Couple of big architectural changes when internet/browsers and then mobile really hit. But fundamentally it's a very legacy / old school application. Lots of COBOL, if that helps calibrate :->

We use queues pervasively. It's PeopleSoft's preferred integration method for other external applications, but over the years a large number of internal plumbing is now via queues as well. PeopleSoft Integration Broker is kind of like an internal proprietary ESB. So understanding queues and messaging is key to my PeopleSoft Administrator teams wherever I go (basically sysadmins in service of PeopleSoft application:).

coronapl4• 6 months ago

Recently, I also started using queues for integrating with legacy health care applications. Most of them run on-promise and they don't have incoming internet connection for security reasons. The strategy is to send a message to a queue. The consumer application uses short polling to process the messages and then it can call a webhook to share the status of the job. Do you also follow a similar approach?

prhn• 6 months ago

This is surprisingly basic knowledge for ending up on the front page.

It’s a good intro, but I’d love to read more about when to know it’s time to replace my synchronous inter service http requests with a queue. What metrics should I consider and what are the trade offs. I’ve learned some answers to this question over time, but these guys are theoretically message queue experts. I’d love to learn about more things to look out for.

There are also different types of queues/exchanges and this is critical depending on the types of consumer or consumers you have. Should I use direct, fan out, etc?

The next interesting question is when should I use a stream instead of a queue, which RabbitMQ also supports.

My advice, having just migrated a set of message queues and streams from AWS(AvtiveMQ) to RabbitMQ is think long and hard before you add one. They become a black box of sorts and are way harder to debug than simple HTTP requests.

Also, as others have pointed out, there are other important use cases for queues which come way before microservice comms. Async processing to free up servers is one. I’m surprised none of these were mentioned.

Aurornis3• 6 months ago

This is surprisingly basic knowledge for ending up on the front page.

Nothing wrong with that! Hacker News has a large audience of all skill levels. Well written explainers are always good to share, even for basic concepts.

coronapl4• 6 months ago

Agree! In fact, I would appreciate more well written articles explaining basic concepts on the front page of Hacker News. It is always good to revisit some basic concepts, but it is even better to relearn them. I am surprised by how often I realize that my definition of a concept is wrong or just superficial.

p1anecrazy• 6 months ago

In principle, I agree, but “a message queue is… a medium through which data flows from a source system to a destination system” feels like a truism.

chasil• 6 months ago

This has more depth on System V/POSIX IPC, and a youtube video.

https://www.softprayog.in/programming/interprocess-communica...

Fun fact: IPC was introduced in "Colombus UNIX."

https://en.wikipedia.org/wiki/CB_UNIX

SpaceManNabs• 6 months ago

I think the article would be a little bit more useful to non-beginners if it included an update on the modern landscape of MQs. Are people still using apache kafka lol?

it is a fine enough article as it is though!

deepsun• 6 months ago

Kafka is a distributed log system. Yes, people use Kafka as a message queue, but it's often a wrong tool for the job, it wasn't designed for that.

arter45• 6 months ago

but I’d love to read more about when to know it’s time to replace my synchronous inter service http requests with a queue. What metrics should I consider and what are the trade offs. I’ve learned some answers to this question over time, but these guys are theoretically message queue experts. I’d love to learn about more things to look out for.

Not OP but I have some background on this.

An Erlang loss system is like a set of phone lines. Imagine a special call center where you have N operators, each of which takes calls, talks for some time (serving the customer) and hungs up. Unlike many call centers, however, they don’t keep you in line. Therefore, if all operators are busy the system hungs up and you have to explicitly call again. This is somewhat similar to a server with N threads.

Let's assume N=3.

Under common mathematical assumptions (constant arrival rate, time between arrivals modeled by a Poisson distribution, exponential service time) you can define:

1) “traffic intensity” (rho) has the ratio between arrival time and service time (intuitively, how “heavy” arrivals are with respect to “departures”)

2) the blocking probability is given by the Erlang B formula (sorry, not easy to write here) for parameters N (number of threads) and rho (traffic intensity). Basically, if traffic intensity = 1 (arrival rate = service rate), the blocking probability is 6.25%. If service rate is twice the arrival rate, this drops to 1% approximately. If service rate is 1/10 of the arrival rate, the blocking probability is 73.3%.

I will try to write down part 2 when I find some time.

EDIT - Adding part 2

So, let's add a buffer. We said we have three threads, right? Let's say the system can handle up to 6 requests before dropping, 1 processed by each thread plus an additional 3 buffered requests. Under the same distribution assumptions, this is known as a M/M/3/6 queue.

Some math crunching under the previous service and arrival rate scenarios:

- if service = arrival time, blocking probability drops to 2%. Of course there is now a non-zero wait probability (close to 9%).

- if service = twice the arrival time, blocking probability is 0.006% and there is a 1% wait probability.

- if service = 1/10 of the arrival time, blocking probability is 70%, waiting probability is 29%.

This means that a buffer reduces request drops due to busy resources, but also introduces a waiting probability. Pretty obvious. Another obvious thing is that you need additional memory for that queue length. Assuming queue length = 3, and 1 KB messages, you need 3 KB of additional memory.

A less obvious thing is that you are adding a new component. Assuming "in series" behavior, i.e. requests cannot be processed when the buffer system is down, this decreases overall availability if the queue is not properly sized. What I mean is that, if the system crashes when more than 4 KB of memory are used by the process, but you allow queue sizes up to 3 (3 KB + 3 KB = 6 KB), availability is not 100%, because in some cases the system accepts more requests than it can actually handle.

An even less obvious thing is that things, in terms of availability, change if you consider server and buffer as having distinct "size" (memory) thresholds. Things get even more complicated if server and buffer are connected by a link which itself doesn't have 100% availability, because you also have to take into account the link unavailability.

BWStearns• 6 months ago

when to know it’s time to replace my synchronous inter service http requests with a queue

I've found that once it's inconveniently long for a synchronous client side request, it's less about the performance or metrics and more about reasoning. Some things are queue shaped, or async job shaped. The worker -> main app communication pattern can even remain sync http calls or not (like callback based or something), but if you have something that has high variance in timing or is a background thing then just kick it off to workers.

I'd also say start simple and only go to Kafka or some other high dev-time overhead solution when you start seeing Redis/Rabbit stop being sufficient. Odds are you can make the simple solution work.

ImPleadThe5th• 6 months ago

After spending most of my career hacking on these systems, I feel like queues very quickly become a hammer and every entity quickly becomes a nail.

Just because you can keep two systems in complete sync doesn't mean you should. If you ever find yourself with more-or-less identical tables in two services you may have gone too far.

Eventually you find yourself backfilling downstream services due to minor domain or business logic changes and scaling is a problem again.

emmanueloga_• 6 months ago

I’ve been thinking that defaulting to durable execution over lower‑level primitives like queues makes sense a lot of the time, what do you think?

A lot of the "simple queue" use cases end up needing extra machinery like a transactional‑outbox pattern just to be reliable. Durable‑execution frameworks (DBOS/Temporal/etc.) give you retries, state, and consistency out of the box. Patterns like Sagas also tend to get stitched together on top of queues, but a DE workflow gives you the same guarantees with far less complexity.

The main tradeoff I can think of is latency: DE engines add overhead, so for very high throughput, huge fan‑out, or ultra‑low‑latency pipelines, a bare‑bones queue + custom consumers might still be better.

Curious where others draw the line between the two.

jedberg• 6 months ago

Highly biased opinion here since I'm the CEO of DBOS:

It'll be rare that the overhead actually has an effect, especially if you use a library like DBOS, which only adds a database write. You still have to write to and read from your queue, which is about as expensive as a database write/read.

abelanger• 6 months ago

Drawing the boundary at high throughput, huge fan-out and ultra-low-latency is correct - I'd also add that MQs are often used for pub/sub and signaling.

MQs are heavily optimized for reducing E2E latency between publishers and consumers in a way that DE engines are not, since DE engines usually rely on an ACID compliant database. Under load I've seen an order of magnitude difference in enqueue times (low single-digit milliseconds for the MQ p95 vs 10ms p95 for Postgres commit times). And AMQP has a number of routing features built-in (i.e. different exchange types) that you won't see in DE engines.

Another way to think about it is that message queues usually provide an optional message durability layer alongside signaling and pub/sub. So if you need a very simple queue with retries _and_ you need pub/sub, I'd be eyeing an MQ (or a DE execution engine that supports basic pub/sub, like Hatchet).

I wrote about our perspective on this here: https://hatchet.run/blog/durable-execution

( disclaimer - I'm one of the people behind https://github.com/hatchet-dev/hatchet )

charcircuit3• 6 months ago

It doesn't make sense to persist by default. If I send a message to my rendering thread's message queue that the window is fully occluded I never want that message to be persisted. If the process crashes the fact that the window was occluded back then has no relevance to the current insurance of the process.

Trying to persist things has a performance cost that you don't want to pay everytime you want a thread to communicate with another.

Do you think ArrayList or std::vector should be persisted by default?

keithnz• 6 months ago

this is not really a good guide to Message Queues, it's really only talking about them in context of one use of them. It doesn't really talk about the message queue at all and the basic differences between various message queue implementations. Your local AI chatbot is going to give you a much better overview, just take the title "Message Queues: A Simple Guide with Analogies" and it does a much better job

Message Queues: A Simple Guide with Analogies (2024)

Related Stories