Beyond stunnel: High-speed, secure connections across the public Internet

http://blog.vcider.com/2012/02/beyond-stunnel-secure-high-speed-network-connections-in-the-public-cloud/

by jbrendel • 14 years ago

11 18 14 years ago

blog.vcider.com

The standard ways to secure connections across public links (even for applications that don't support encryption themselves) has been to use stunnel or OpenVPN. But those solutions come with a significant performance hit. This article presents measurements and comparisons to illustrate this and presents a more modern solution with much better performance characteristics.

wmf• 14 years ago

As usual, someone's pretending that IPSec doesn't exist.

jbrendel9• 14 years ago

I'm not pretending this. But consider that IPSec doesn't exactly have a reputation for being easy to set up or even is particularly well supported across IaaS provider networks.

People revert to stunnel (and OpenVPN), exactly because they may not have the knowledge or inclination to get a fully featured IPSec setup going.

pedrocr2• 14 years ago

Are the two doing the same amount of encryption or is vCider using a much less complex cipher? Is the CPU difference really just in the kernel vs userspace implementation?

tinc (http://tinc-vpn.org/) would seem like a more interesting comparable than stunnel since it sets up a p2p VPN that routes all IP traffic instead of just a point-to-point link.

jbrendel9• 14 years ago

vCider uses AES 256 encryption.

Tinc looks interesting, I will test that as well.

Considering the huge difference in context switches and interrupts, I don't think that encryption induced CPU load is the only issue here.

Kernel stuff on its own doesn't just magically run faster, of course. But in this case, I think it's the constant interaction between user-space and kernel-space, which causes the problem. That's an issue that will impact any user-space solution to a networking problem.

pedrocr2• 14 years ago

And what encryption is stunnel using? AES was picked to be fast so it may very well be outperforming whatever stunnel uses.

Can 1200 extra context switches and ~6400 extra interrupts per second use up 100% cpu? In fact you mention that for stunnel most of the CPU was in userspace and not the kernel which would indicate time spent actually using the CPU instead of doing context-switches and interrupts, which I assume top would show as "sys".

I also find the extra interrupts strange. I wonder if vCider is sending bigger packets and what caching/latency implications that might have.

strags• 14 years ago

One question that isn't in the FAQ that I would instantly be concerned about is exactly what encryption mechanism is used, and where the private keys are stored. Specifically, are they stored in vCider's database?

If my goal was to set up a secure tunnel, I'd be incredibly wary of using a closed source solution like this. Even if you're not worried about the government secretly demanding access to your keys, you might reasonably be concerned about vCider getting hacked.

jbrendel9• 14 years ago

Indeed, the keys are centrally created and (briefly) stored. However, they are also changed frequently and historic (older) keys are not kept on record. So, if someone intercepts a bunch of your traffic and then wants to hack or demand our database, they would have to hurry since the older keys are not kept around.

However, I understand your concern. We are thinking of ways to address this in an even more comprehensive way.

jbrendel9• 14 years ago

Sorry, I forgot to answer this: vCider uses AES 256.

mtrojnar3• 14 years ago

Testing results indicated that stunnel was much faster than the line speed (and thus faster than his own product), but the author simply ignored it. In fact his version of stunnel had DEFLATE/ZLIB compression enabled by default. In order to prove that his own product is better than stunnel, the author of this test decided to compare the bandwith of an uncompressed stream encrypted with his product with the bandwidth of a compressed stream encrypted with stunnel.

jbrendel9• 14 years ago

Well, I contacted you privately to discuss this so that we may both enlighten each other on what's going on, but you did not respond to my email and instead went out publicly. Oh well.

But let's look at it. The physical link was capable of carrying something like 18 Mbit/s. When running iperf through stunnel, it reported more than 400 Mbit/s. But if you look at the actual bandwidth that was used during the transfer, it was indeed just 4.8 Mbit/s.

So, the 400 Mbit/s is clearly an illusion caused by the compression. Compressing a stream is a worth while goal, for sure. And it can be helpful in many cases. But I guess iperf's data is highly compressable. Considering that much of what's transferred these days is already compressed (multi-media files), I doubt that in the real world you will see any sort of speedup even remotely like this.

The fact is this: If it comes to actually transferring data over the wire, stunnel is very slow and there are just no two ways around it. It attempts compression at very high cost in CPU cycles and in the end is still going to be bound by context switches and interrupts.

I'm going to repeat the tests with compression disabled and update the blog post accordingly.

mtrojnar3• 14 years ago

1. It's you who started the flame by publishing your obviously unfair comparison.

2. I didn't receive your email (if you really sent it).

3. Stunnel overrides the OpenSSL default of enabling compression by default since version 4.51 released over a month ago http://www.stunnel.org/?page=sdf_ChangeLog

4. Whether compression is useful or not depends on many factors, including not only type of data, but also available bandwidth and CPU power. And data compression is not an illusion. I'd be afraid to use your products if you don't understand it.

5. Compression is indeed much slower than encryption. This is a fact. Do you really mean that your product is better just because it doesn't support compression?

6. Stunnel is indeed a performance bottleneck, but only if your internet connection is over 0.5Gbps, and your server is as slow as my desktop: http://www.stunnel.org/?page=perf

waldo2k2• 14 years ago

What version of OpenSSL was used on the test machine? That would greatly effect stunnel's performance. See here: http://vincent.bernat.im/en/blog/2011-ssl-benchmark-round2.h...

jbrendel9• 14 years ago

Version 1.0.0.e

jbrendel9• 14 years ago

As you can see, after publishing this article I received some feedback and questions about the comparison, including from the author of stunnel himself, Michal Trojnara. Even though the stunnel website itself states that the default is ‘no compression’, this apparently is not so. It appears iperf’s default data seems to be highly compressible, thus heavily skewing the performance numbers: stunnel was performing very different work than native networking or vCider. To arrive at more realistic numbers, I used a large image transfer (a JPEG) instead, which by its nature is not much more compressible. I transferred this file with iperf (which can use file input) as well as wget, The results? stunnel is much more comparable with both the native and the vCider networking speeds.

Interrupts and context switches are now roughly the same for all three solutions. stunnel still exhibits a significantly higher CPU load (20%), but certainly does not max out the CPU anymore. I suspect that the higher numbers of context switches and interrupts result from iperf’s default behavior of sending as much data as it can in a given time interval. And since stunnel can easily compress iperf’s default data, iperf was able to send a lot of this, which also explains the results reported by iperf.

While I maintain that a setup consisting of multiple nodes is much easier to maintain with vCider – which also provides a number of other interesting features – it must be noted that stunnel does indeed perform very well for point to point connections. Note to self: Be sure not to use synthetic data for performance tests like this.

Beyond stunnel: High-speed, secure connections across the public Internet

Related Stories