How to use Podman inside of a container (2021)

https://www.redhat.com/sysadmin/podman-inside-container

by teleforce • 3 years ago

136 54 3 years ago

devjab3• 3 years ago

Yo dawg, I heard you liked containers so I put a container inside your container!

In all seriousness though, I wonder if this could solve one of our issues of running mutli-container apps in Azure, which is currently causing us some trouble in regards to VNETs and Private Endpoints. I’m sure it’s likely because we should be using Kubernetes or similar, or at the very least have someone who knows how to actually set the Ops part of DevOps up better than we currently do. Long story short, those things won’t realistically happen, and if we could solve them by running multiple podmans inside a docker docker-container deployed as an azure app then we could likely fix our security issues of not being able to setup VNETs and PEs on multi-container apps because it’s been a “up-coming” feature for at least a year.

I’d be interested to know your thoughts on it. The efficiency doesn’t matter as much, our workloads are around 1-5% of our Azure budget which is basically a blip on the bigger budgets.

hnlmorg• 3 years ago

I’ve used Consul for instances where I’ve needed some of the benefits of k8s but without all the overhead of running k8s.

I’m fact currently using Consul for one such problem as it happens: managing Docker from inside Docker.

sofixa• 3 years ago

Are you sure you mean Consul and not Nomad (or are you talking about some other Consul?)? In either case, could you elaborate how you do it?

mhio2• 3 years ago

Are you running the multi-container apps under App Service?

devjab3• 3 years ago

Yes, with the docker compose option.

evntdrvn• 3 years ago

are you using Azure Container Apps?

devjab3• 3 years ago

Do you mean their vendor-lock-in but much easier to use kubernetes? We can’t because of EU laws prohibiting us from that kind of vendor lock-in.

LeoPanthera• 3 years ago

It’s containers all the way down.

BossingAround• 3 years ago

It's Linux all the way down. Or, alternatively, it's processes all the way down :).

rexsteroxxy• 3 years ago

Most of this has historically been related to Docker in Docker (DIND), but now, people also want to run Podman in Podman (PINP) or Podman in Docker (PIND).

So close to some acronym puns :D

RandomBK• 3 years ago

This is very useful for running containers in lightweight untrusted environments.

I personally use this setup for my GitLab CI runners, using a mix of podman and buildah to build containers. I can't 100% trust the container build script, so avoiding having to expose a Docker socket to that untrusted code is a critical safety layer.

storrgie• 3 years ago

Do you have a writeup on this configuration?

sgsag334• 3 years ago

What is the use case for a container in a container?

movedx2• 3 years ago

Over complicating the engineering (Docker) involved in getting some x86 code into RAM and on a CPU stack, by over complicating further (DIND.) It's essentially another way to abstract and abstraction, and engineers are finding ways to justify it.

spyremeown2• 3 years ago

It's not really over complicating anything, though? It makes perfect sense, it's not hard to understand. Nested VMs have been a thing for a looong time. I honestly don't understand where the criticism for Docker and k8s comes from. Some of HN comments sound like old men shouting at the clouds because they don't understand modern technology and its purposes.

If you want, go right ahead with your managed, on-site VMs where you copy a .php file to an Apache server using a thumb drive and restart the service. I don't care. But that's not how modern teams are working.

Reventlov• 3 years ago

Being able to run rootful stuff in rootless containers is nice for CI where you need for example to install a bunch of stuff or mount things. There are stuff that requires being root, and you might not want to give a real root access to your CI.

sgsag334• 3 years ago

I would do that up front with a tailered CI job image I would reuse instead of creating it each time again?!

VoodooJuJu• 3 years ago

Complexity overhead --> job security.

hkwerf• 3 years ago

I ship containers to customers. Would be nice to run tests against them before releasing a container and it would be nice if those tests themselves could run in a container in order to have a clean test environment.

sgsag334• 3 years ago

You could create that test environment image beforehand, mirror it and use it for the job that needs it. No need for adding another container within a container.

codethief3• 3 years ago

…and to re-use cached image layers and speed up the pipeline!

Hendrikto• 3 years ago

Building containers within a CI system, for example. CI jobs run as images, with a DinD service attached, which they can use to build images themselves.

sgsag334• 3 years ago

But even if I run in a container e.g. a Github actions runner I can use buildah to build my image right? So no need for another container. Why is there another layer needed?

actionfromafar• 3 years ago

I'm surprised it didn't happen earlier.

Either way, it will be done. Ask IBM. What's the use case for running OS360 VMs inside OS360 VMs?

We repeat the same patterns IBM discovered in the 1960s, but with more building materials.

AtlasBarfed• 3 years ago

and WAAAYYYYYYY less money

orthoxerox• 3 years ago

For example, your CI/CD agent is running in a container, and has to build and test containerized software. You can use something like buildah to build your app containers without a container runtime, but you want to run them to run the tests.

Ideally, you would want to do this while remaining platform-agnostic, so your agents will be able to start a container no matter where they are themselves: on bare metal, in Podman, in Docker, in k8s.

100011_100001• 3 years ago

I was about to say the same thing. We currently use a podman container, deploy it in Kubernetes, build container images with it for CI, push them and scale down the podman container.

hitchdev• 3 years ago

Here's an example of it in action to run integration tests:

https://github.com/hitchdev/hitchstory/tree/master/examples

In e.g. the website example, the parent podman container does everything from running the integration tests to converting a video of the test at the end into a slowed down GIF and combines it with screenshots to put in the docs. It orchestrates the child podman containers - playwright + the webapp.

I'm certain that if all this tooling were run on different host machines it would have a myriad of "works on my machine" problems all over the place - whether due to mac, WSL, weird linux distros, github actions idiosyncrasies or whatever.

I'm equally certain that if the tooling were bundled in the app container it would needlessly fatten it with unnecessary and potentially conflicting dependencies. I don't want video conversion tooling installed in my web app even if I do want it to generate my docs.

qudat• 3 years ago

Ive been reading every line of this blog for a week trying to get it to work — and failed.

The goal is container driven development. But if all my dev tools are inside a container, how do I iterate on building new containers within a container? This is the core feature I wanted.

But unfortunately, this challenge proved way too difficult to pull off and nothing seemed to work for me.

My guess is these setups heavily depend on the host machine and how podman was setup on it which breaks the entire value of using container driven dev.

https://bower.sh/opensuse-microos-container-dev

twic• 3 years ago

Here's another one. I have an app which spawns subprocesses to do computations. I would love to put the subprocesses in containers to constrain their resource usage (i know that's not the only way to do it, but it's an effective and well-understood way to do it). But i would also like to able to run my application in a container!

electroly• 3 years ago

While using containers is common and well-understood, containers within containers are not. It's novel enough to warrant this blog post on how to do it!

If all you want is resource constraints on your spawned processes, it's easier and more common to just use cgroups. It's straightforward and you should have a working understanding of cgroups anyway if you want to be effective at using containers, which are built on top of cgroups.

Cgroups are really easy to use and I feel like people aren't bothering to learn about it. :(

zzbn00• 3 years ago

I use MicroOS (https://microos.opensuse.org/), to keep the base operating system clean you'd install helper tools for constructing containers in a container... so two levels of containers would be very helpful

Izkata• 3 years ago

Ever since we started moving to Docker it's been a massive pain. I'm on a maintenance team doing both legacy (non-Docker) and the occasional Docker-based system that gets handed to us (and then a few months later taken back, it's kind of annoying), and not a single member of my team has gotten the Docker-based systems to work. We all end up with different issues getting Docker to run, or for the different containers to communicate, or being able to browse to the app running in the container. Different systems from different teams also have a tendency to interfere with each other. Two years after this started I finally got an admission from the main development team that every new dev on their team has had similar problems.

On the flipside, LXD containers have "just worked" for everyone who has tried it so far. We've been able to use them on a whim for testing stuff, no problems at all.

So I've been wondering for a while if we could use LXD containers to provide a clean slate to run the Docker containers inside of, maybe then we'd at least all have the same problems, if not be able to solve them entirely.

freesocket• 3 years ago

"... use LXD containers to provide a clean slate to run the Docker containers inside of .."

https://ubuntu.com/tutorials/how-to-run-docker-inside-lxd-co...

If you use podman you can just use the default storage backend (zfs).

onesphere• 3 years ago

Here's how I package my system database as a user-access object: https://thetaplane.com/runtime/synthetic-database

debarshri• 3 years ago

If you thought container in container was cool. How about k8s in container? Do checkout kind [1]

[1] https://kind.sigs.k8s.io/

spyremeown2• 3 years ago

Kind is super cool! I used it for my thesis, as I needed many nodes without getting super into k8s configuration. I love, love kind. If you're into learning Kubernetes, it's probably the easiest way to get yourself a cluster quickly.

codethief3• 3 years ago

I realize that Linux wasn't made for containerization originally and that's why it's so so painful to nest containers, run them without root etc. But I wish we'd already live in a world where all binaries (maybe with the exception of command line tools) ran containerized by default and I, as the user, had to grant explicit access to files, network, hardware/devices, etc. Not just for security reasons (though it'd be nice if `npm install` and `pip install` couldn't mess up my entire system) but also to make external dependencies more explicit.

arcanemachiner• 3 years ago

`pipx` seems to be a good solution for containing Python dependency clutter.

dilyevsky• 3 years ago

It's not so painful and most pain comes from Linux insistence on /proc-based APIs as opposed to something similar to Solaris-descendants where it's a json spec (I think xml originally)

PhilippGille• 3 years ago

Isn't that what Snap and Flatpak are doing? 1) Include dependencies (there can be shared runtimes but they don't mess up the host), 2) sandboxed by default and you need to grant permissions.

E.g. Snap sandboxing: https://snapcraft.io/docs/security-sandboxing

ElectricalUnion• 3 years ago

It mostly works except for the part 2 failing miserably; so many apps require full filesystem access to have sane behaviour it's not even funny.

It doesn't help a lot that instead of having a explicit "can I have a host file" API, the apps are supposed to use a framework that invokes "portals".

kytazo• 3 years ago

Sounds like android or what a modern linux distro should look like.

Sadly both most used userspace distros and the kernel they come with are borderline dangerous and shouldn't be any trusted by people using them, even if they're technical enough to feel comfortable within their environment.

musicale2• 3 years ago

It's a shame that multi-ring security never really made a comeback.

The ability to let any ring (such as a user ring) handle the library and system calls of an outer ring (such as a container ring) seems like it would be convenient.

Alternately, some microkernels have a more peer-to-peer setup which could work as well.

ashishbijlani• 3 years ago

I built Packj [1] sandboxing for securing “pip/NPM install”. It uses strace for sandboxing and blocks access to sensitive files and limits traffic to known-good IP addresses.

1. https://github.com/ossillate-inc/packj

user3939382• 3 years ago

Until podman could be used with AWS ECR/ECS it's pretty much moot in my case: https://github.com/aws/containers-roadmap/issues/626

eriksjolund• 3 years ago

I just tried this out. The new systemd directive OpenFile= opens up the possibility to pass the file descriptor of a file from the host to a container running in a container. (using rootless Podman running rootless Podman)

sudo systemd-run --property User=test --property OpenFile=/etc/secretfile.txt --collect --pipe --wait --quiet podman run --security-opt label=disable --user podman --device /dev/fuse quay.io/podman/stable podman run -q alpine sh -c "cat <&3"

How to use Podman inside of a container (2021)

Related Stories