Arduino announces its first ARM-based prototyping board, the Arduino Due

http://www.thinq.co.uk/2011/9/19/arduino-goes-arm-due-board/

by ghalfacree • 15 years ago

71 28 15 years ago

thinq.co.uk

raphman6• 15 years ago

Hmm, I'm not sure whether an ARM board is really a good idea. For most applications, a normal Arduino is easily sufficient. For anything more complicated, you can buy an ARM board running Linux (e.g the upcoming Raspberry Pi [1] for $25-$35).

Arduinos are primarily used for education and prototyping. Programming raw ARM chips makes sense if you build a small series of specialized devices and want to keep costs down.

Given that the Arduino Due will certainly cost significantly more than $30, I see no market for such a board.

[1] http://www.raspberrypi.org/

jmaygarden6• 15 years ago

There is a big difference between a Cortex-M3 and whatever is powering the Raspberry Pi. It's intended as an 8-bit microcontroller replacement. I've recently switched from TI MSP430 processors to this same Cortex-M3 from Atmel and performance has increased while per unit cost has gone down.

dorianj• 15 years ago

Correct. The ARM M series doesn't even have floating point hardware. The M3 is intended for real-time, low power applications, and is indeed a fantastic replacement for 8 or 16bit microcontrollers.

raphman6• 15 years ago

Thanks for the clarification. Is there really much demand for such a board?

gamble• 15 years ago

The Cortex-M3 microcontrollers are awesome. Much more powerful than the older 8-bit architectures available at the same price, and amenable to industry-standard tools instead of just the compilers and IDE sold by the manufacturer. I think this move just mirrors the general industry trend toward the ARM architecture. It's become difficult to justify using one of the old 8-bit architectures anymore, except at the lowest extremes of price or power consumption.

msutherl• 15 years ago

I'm more interested in the Leonardo with the 32u4 chip myself. Much smaller than the Arduino, simpler circuit, built-in USB for higher data transfer bandwidth and comes with lots of A/D's. The 32u4 has been _the_ chip for low-cost projects that involve communication with a computer for some time now (Adafruit and PJRC [Teensy] make one), but Arduino is going to bring it to a bigger audience. The Teensy already worked with Arduino libraries, but the boot loader wasn't free and it wasn't 'officially supported'.

tomkinstinch• 15 years ago

The 12-bit A/D is a step up.

Anyone know the projected unit cost for one of these? The processor alone is ~$10 (individually)

jmaygarden6• 15 years ago

One can get that microcontroller around $5 a piece with larger quantities (e.g. 10k). Also, the AT91SAM3U has a high-speed USB peripheral. So, the extra circuitry for the serial-to-USB bridge is no longer necessary.

jmaygarden6• 15 years ago

Also, the specs are a bit misleading. The 16 ADC are broken down into half 12-bit and half 10-bit inputs. The article makes it sound like all 16 ADC lines are 12 bits while only 8 of them are.

yardie• 15 years ago

Have they finally fixed the pin header defect in their boards or is it institutionalized at this point?

Pyrodogg2• 15 years ago

As far as I know, it's institutional, which is unfortunate. Since they didn't take the opportunity to fix it with the Arduino Uno I don't think they ever will.

mindcrime• 15 years ago

Would you be kind enough to explain what the "pin header defect" is, for an Arduino noob? I'm just starting to play around with Arduino hacking and haven't heard of this yet (until now).

raphman6• 15 years ago

The distance between the two rows of pin headers on each side is not a multiple of 0.1". This means that every shield that you attach to the Arduino needs to have this same strange spacing between the rows of pin headers. You cannot just use a normal perfboard. As all Arduino shields have the same weird spacing, fixing this design flaw would require everyone to buy new shields. There are Arduino clones that add correctly aligned rows of pin headers [1], however.

[1] http://shop.pinguino.cc/image/cache/data/olimex/pic32-otg-50... (actually, no true Arduino clone)

Edit: found a good explanation with pictures here: http://brettbeauregard.com/blog/2009/07/arduino-offset-heade...

MatthewPhillips2• 15 years ago

Between Arduino and Raspberry Pi, are we approaching a point where a hardware startup can bootstrap? There's a lot of room for disruption in the home appliance sector that has been out of reach for the typical internet startup. Think garage door openers, doorbells, anything in your house that currently has a chip in it. Those companies are firmly entrenched in their way of doing business.

jimmyjim• 15 years ago

I have been thinking the same thing for a while now.

I imagine they're great to create prototypes with and start up with, but as someone posted to my inquiry yesterday ( http://news.ycombinator.com/item?id=3011227 ), they're too expensive to go into production line.

raphman6• 15 years ago

Building working prototypes is no longer a major problem. Nowadays, (experienced) individuals can design portable game consoles [1], alarm clocks [2], mobile phones [3], and pretty much everything else.

However, you need a lot of money, time and experience for manufacturing, testing, shipping, and supporting the final products. Unlike software startups, hw startups may need to apply for FCC and international certifications, supervise contract manufacturers, and need to think carefully about liability issues.

[1] http://openpandora.org/ - [2] http://www.chumby.com/ - [3] http://gta04.org/

jgrahamc• 15 years ago

I was going to reply but you've done most of it for me. The big costs are going to be in the manufacturing and quality control post manufacturing.

Also, if your product contains anything to do with RF you are in a whole other world where you'll need certifications of various sorts and lots more testing.

MatthewPhillips2• 15 years ago

Aren't those phase 2 problems though? As a simple test to see if a market exists, why isn't it viable to sell your (polished) prototypes? One could make, (just spitballing) a doorbell that sends you an email as a hobby project, then throw it up on whatever the electronics equivalent of etsy is, and build them on build-to-order basis for the first few hundred units and then worry about investors only if your idea floats.

For the products we're talking about here, no competition exists. So I can sell my gimmicky doorbell for $80 or $90 just to see if there's any interest at all, then get investors and start building my own arduino boards from parts (since the specs are open) at scale.

nextparadigms• 15 years ago

If this is the first ARM-based Arduino, what was the Arduino chip based on that Google used at I/O for that accessory API thing? Was it a regular (but smaller) Arduino?

raphman6• 15 years ago

probably a 'regular' Arduino, i.e. an 8-bit AVR microcontroller.

See http://www.arduino.cc/en/Main/ArduinoBoardADK and http://www.amarino-toolkit.net/

jmaygarden6• 15 years ago

All of the official Arduino hardware designs have used an AVR to the best of my knowledge. Netduino [1] is a related project that runs a stripped down .NET framework on an ARM7 core. However, that's not what Google used. It may be the reference for Windows Phone add-ons.

[1] http://netduino.com/

nemik• 15 years ago

It uses an ATmega2560. Still an 8-bit AVR but has more memory and USB host functionality.

jmaygarden6• 15 years ago

Has a schematic or block diagram been released for the Arduino Due? I haven't found one with a quick search. I'd also be very interested to take a look at the bootloader source code if that is available.

Arduino announces its first ARM-based prototyping board, the Arduino Due

Related Stories