"Seriously - those first 386 chips barely worked at all. " Anyone remember?

http://groups.google.com/group/alt.folklore.computers/msg/d11e88d27137261b?hl=en

by yuhong • 15 years ago

63 41 15 years ago

groups.google.com

pnp• 15 years ago

Raymond Chen recently posted about 386 B1 problems. In the end Microsoft decided not to support it. I imagine most early 386 chips just ran 16-bit MS-DOS code.

Raymond's article:

http://blogs.msdn.com/b/oldnewthing/archive/2011/01/12/10114...

yuhong4• 15 years ago

Yes, this inspired this in the first place.

yuhong4• 15 years ago

Anyone remember the early 386 computers that had the early chips, like the Compaq DeskPro 386?

flomo• 15 years ago

The whole discussion of the IBM PS/2 line brought back some memories. My first real job out of school was at an IBM shop, with loads of older PS/2s, weirdly fitted out with MCA AppleTalk cards.

davidst• 15 years ago

Little bits of history:

Compaq shipped a computer with a 386 before IBM did. That was quite a coup at the time and helped establish Compaq as a top-tier computer maker instead of just another PC-clone vendor.

Compaq was also, in a way, partially responsible for Intel taking marketing and branding more seriously. When computer buyers were polled with the question, "Who invented the 386?" the most common answer was "Compaq." Intel responded, in 1991, with their "Intel Inside" campaign to get their logo and brand on the outside of the computers where it could be seen.

Cyrix, an Intel competitor at the time, boldly parodied the "Intel Inside" campaign with their own "Cyrix Instead" campaign.

pbhjpbhj• 15 years ago

>Cyrix, an Intel competitor at the time, boldly parodied the "Intel Inside" campaign with their own "Cyrix Instead" campaign.

That sounds like an awful campaign - every bit of copy with "Cyrix instead" bringing to mind their competitor and subtly suggesting that Cyrix are the lesser company .. bleurgh.

yuhong4• 15 years ago

>Cyrix, an Intel competitor at the time, boldly parodied the "Intel Inside" campaign with their own "Cyrix Instead" campaign.

Which is their CPUID vendor ID.

ctb• 15 years ago

My first 'PC' was a 386DX 33MHz with 1MB of RAM. That was probably after the early problematic chips. It was a good machine for what it was. A year later I 'upgraded' to 4MB of RAM and a 486SX 25MHz.

sliverstorm• 15 years ago

This might explain why I've never personally seen a 386, only plenty of 486's

jrockway3• 15 years ago

The first computer that I was around to buy was a 386. There were plenty of them out in the wild; you just happened to buy a 486 first :)

geedee77• 15 years ago

Wow I feel old now - the first one I was around to buy in that family was the 8088! I remember getting excited when we got our first 286

Osiris• 15 years ago

This reminds me of the good ol' days of the "Turbo" button on computers. Seriously, why would anyone purposefully half the clock speed of their processor?

leoc• 15 years ago

It was for compatibility with older PC software that made unfortunate timing assumptions, wasn't it? (I wasn't there at the time.)

jff• 15 years ago

When you write a program that does its timing using idle loops... old games, for instance, got really silly when they suddenly ran at 25 MHz instead of 8.

Tuna-Fish• 15 years ago

Many old programs were written without proper timers -- for example, in many old games if the processor ran twice as fast, everything happened twice as fast.

Also, completely unrelated, but the processor in the computer you are using right now is very probably presently running at less than half of it's maximum speed.

harisenbon• 15 years ago

Yup, I remember my copy of f-15 Strike Eagle for the tandy 1000. When we got a new 486 with the turbo button, I wondered what would happen with my game...

Suddenly my plane was going fast enough to fly over Syria 2 times a second.

jrockway3• 15 years ago

Also, completely unrelated, but the processor in the computer you are using right now is very probably presently running at less than half of it's maximum speed.

But of course, for very good reason: it allows the computer to remain on for 10 hours instead of 10 minutes. Power saving is a big deal these days, but back in the 386 days, nobody cared (and 4.77MHz processors were not exactly power-hungry either).

malux852• 15 years ago

This is the correct reason for the turbo buttons. Most of the program delays (especially in games) was done inside really basic things like

// Delay for(int i = 0; i <= 10000; i++) { // Do nothing }

This was a bad way of putting delays in the game / program.

I remember when I was young, getting about 10 386 computers and mounting them on the wall of my bedroom (being young and obcessed with star trek, I wanted to turn my room into a borg cube) .. I wrote programs that used the parallel port to flash big arrays LED's on and off. Being young, I didn't know how to do timing properly on these machines so I used FOR loops like the one above for delays ... the Turbo button allowed me to half the speed of the faster machines while running the same code on all of them.

p.s. The unfortunate side effect of putting 'tight' loops of code in your program as delays meant that the processors got very hot very quickly (this was back when processors didn't necessarily have fans on them). I ended up being ordered to de-construct my borg bedroom when the wallpaper set fire after a chip got hot!

HeyLaughingBoy2• 15 years ago

Robotron FTW!

Completely unplayable on anything faster than a 386/66MHz unless you have superhuman reactions.

robryan2• 15 years ago

It was kind of fun for about a minute watching things slow down to a crawl.

wlievens• 15 years ago

To finish that Micromachines level that was pretty much undoable at normal speed.

thought_alarm• 15 years ago

Interesting post, but consider its header...

    From: "Tony Ingenoso" <aingenosoNOS...@prodigy.net>
    Newsgroups: alt.folklore.computers
    Subject: Re: IBM MIcrochannel??
    X-Newsreader: Microsoft Outlook Express 5.50.4807.1700
    Date: Tue, 07 May 2002 14:43:13 GMT

I sadly wonder if anyone will be linking to any Hacker News comments 10 or 20 or even 30 years from now.

For all its strengths and flaws, there is a historical archival quality about Usenet that is quite compelling.

robryan2• 15 years ago

There are things like search.yc, the thing with hacker news is I'm sure if interest is maintained and quality doesn't go down over the long term many people will roll their own archive formats for it. If people saved most of the random junk on geocities I'd think that many people would be interested in preserving what's here.

rbranson• 15 years ago

Perhaps millions of great ideas and billions of pieces of knowledge have been lost to the almost entirely ethereal IRC as well. The somewhat permanent nature of Usenet and, to a lesser degree, mailing lists, subliminally changes the nature of the conversation.

I feel like we lose some of the ultimate benefits of "real" protocols by using the web as a means for two-way communications, but we also gain a platform for experimentation and rapid prototyping that leads to things like Hacker News.

Groxx• 15 years ago

Will they need to? We have search engines and other QA sites like Stack Overflow. The information is more likely to be found if it's valuable, and more likely to be spread beyond only HN than Usenet posts.

HeyLaughingBoy2• 15 years ago

there is a historical archival quality about Usenet that is quite compelling.

And sometimes it strikes in odd ways.

About 3-4 years ago I saw someone posting on an electronics forum and for the name was vaguely familiar. I asked him if he had ever posted to comp.robotics.misc or sci.electronics around 1997 or so and mentioned a hilarious post about his cat's reaction to an automated cat door he had built. I had saved the post and it ended up being copied from computer to computer as I upgraded (and then was lost to a reinstall with no backup just a few weeks ago!) so I still had a copy. Sent him the post and he agreed that he had written it, but barely remembered doing so.

That, more than anything serves to remind me that the net is forever. I wonder how many things I've said in various usenet groups over the last 20 years have been saved to people's personal archives.

ComputerGuru• 15 years ago

The entire thread makes for a very, very interesting read for anyone interested in this kind of stuff. Thanks for posting this!

Link to full thread: http://groups.google.com/group/alt.folklore.computers/browse...;

ctdonath• 15 years ago

In fairness, the 386 was the first large-volume processor with real memory management, threading, virtual machine, etc support, to wit the first real processor as we know it now. The 286 was stunted, requiring a covert reboot to switch processes. 486 and beyond were incremental improvements in speed and convenience, not fundamental capability.

tptacek• 15 years ago

The 386 was not the first processor with a modern MMU; you have to go back to the '70s for that. The 80286 could thread. The 386 didn't have virtual machine support (you may again be referring to the MMU). And the first generation Core processor is a drastically different machine in almost every respect from the 386.

glhaynes• 15 years ago

The 386 didn't have virtual machine support (you may again be referring to the MMU).

ctdonath might be referring to Virtual 8086 mode that let multiple real mode programs run in isolated virtual machines.

yuhong4• 15 years ago

To be more precise, the 80286 introduced the protected mode with support for using segmentation for memory management. The 386 added paging and extended the architecture to 32-bit, and added Virtual 8086 mode.

JoeAltmaier• 15 years ago

It took so long for the 386 'protected mode' to work well that we had one engineer that called them "real mode' and 'imaginary mode'.

zdw• 15 years ago

I wouldn't be surprised. Chip problems are very common - some examples:

   - The pentium f00f division bug
   - AMD Phenom TLB bug
   - The intel 6xx chipset SATA degrade bug
   - Radioactive cache chips in the Ultrasparc 2 (see here: http://nighthacks.com/roller/jag/entry/at_the_mercy_of_suppliers )
   - Bug in the Ultrasparc 1 that allows malicious user processes to stall the processor in 64-bit mode.

This isn't a new issue, and will continue. Processor's are very common, and errata is quite common - here's 52 pages of it for the Core i7: http://download.intel.com/design/processor/specupdt/320836.p...

rphlx• 15 years ago

There are errata, and then there are errata. No doubt there are some really nasty workarounds in the BIOS, but over the past 10 years Intel has been very good at preventing customer-visible defects at the OS kernel level and above.

hsmyers• 15 years ago

I remember all the way back to the 8080, the 8085 and the Z80--- all quite fondly in fact. Wrote a great deal of assembler code even with the problem of Z80 differences </nostalgia>

"Seriously - those first 386 chips barely worked at all. " Anyone remember?

Related Stories